skip to main content

Gigabit PoE+ Extender

TPE-E100 (Version v2.0R)

  • Easy installation
  • Extends 100m for a total distance of up to 200m (656 ft.)
  • Daisy chain up to 3 units for a total PoE network extension of up to 400m (1,312 ft.)*
  • Supports PoE (15.4W) and PoE+ (30W)
  • Wall mountable
  • LED Indicators
  • Durable metal housing

TRENDnet's Gigabit PoE+ extender, model TPE-E100, takes a single PoE+ connection and extends it an additional 100m (328 ft.) for remote PoE/PoE+ device installation. The PoE Extender auto-detects a PoE (15.4W) or PoE+ (30W) connection and extends it for a total distance of up to 200m (656 ft.) from the PoE+ power source equipment. The TPE-E100 features a convenient wall mountable design for installation flexibility. Daisy-chain up to 3 units for a total PoE+ network extension of 400m (1312 ft.).

A diagram featuring a Gigabit Power over Ethernet (PoE+) Extender connected to a device with a single cable. The extender is receiving power from a PoE/PoE+ switch located below it. The connection point on the device is highlighted, and there’s a symbol indicating power being transmitted to the extender. The switch has multiple ports available for connection.

PoE Powered

Extends a single PoE/PoE+ network connection up to 100m (328 ft.) for a remote PoE or PoE+ device installation.

A schematic diagram showing a series of four Power over Ethernet (PoE) devices connected in a daisy-chain configuration. Each device has two cables plugged into it, with one cable connecting to the next device in the chain. The first device on the left is connected to a power source indicated by a lightning bolt symbol. The last device on the right is connected to a PoE IP camera, indicating the end of the chain. The setup illustrates how up to five units can be linked for extended PoE+ network capabilities.

Daisy-Chainable

Daisy chain up to 3 PoE Extenders for a total PoE+ network extension of 400m (1,312 ft.).

Diagram showing instructions for wall mounting an object. It depicts a wall on the left and a rectangular object on the right, with two screws positioned to be inserted into the wall through the object.

Wall Mountable

Extends a PoE/PoE+ network connection an additional 100m for a total distance of up to 200m (656 ft.) from the PoE power source equipment.

The diagram illustrates a network setup involving a PoE switch located in a server room, a PoE extender, and a PoE camera. The PoE switch is connected to the PoE extender via a cable labeled PoE in with a length of 100 meters or 328 feet. The PoE extender is then connected to the PoE camera via another cable labeled PoE out, also with a length of 100 meters or 328 feet. The PoE extender is shown in a magnified view, highlighting its ports and indicators.

Easy Setup

Simple installation in minutes

PoE/PoE+

Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE (15.4W) or PoE+ (30W) device

Gigabit Ports

The PoE Extender features one gigabit PoE+ input port and one gigabit PoE+ output port

PoE Powered

No external power required—saves installation time and cost

Daisy-Chain

Connect up to 3 units for a PoE+ network extension of up to 400m (1,213 ft.).

Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3ab
  • IEEE 802.3az
  • IEEE 802.3af
  • IEEE 802.3at
Device Interface
  • 1 x Gigabit PoE+ in port
  • 1 x Gigabit PoE out port
  • LED indicators
Data Transfer Rate
  • Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit: 2000Mbps (full duplex)
Performance
  • SRAM buffer: 128KB
  • MAC Address Table: 2K
  • Jumbo Frame: 9KB
Special Features
  • Extends a PoE/PoE+ network connection an additional 100 meters for a total distance of up to 400m (1312 ft.)
  • Cascade up to 3 repeaters
Power
  • Powered by PoE+ Device
  • Max. consumption: 0.9W
PoE Delivery
  • Pair 1: pin 1, 2
  • Pair 2: pin 3, 6
Operating Temperature
  • 0 – 40° C (32 - 104° F)
Operating Humidity
  • Max. 90% non-condensing
Dimensions
  • 86 x 79 x 25mm (3.4 x 3.1 x 1 in.)
Weight
  • 198g (7 oz.)
Certifications
  • CE
  • FCC
Warranty
  • 3 year

PACKAGE CONTENTS

  • TPE-E100
  • Quick Installation Guide

*Each additional extender added to the daisy chain will decrease the overall available PoE budget.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.