WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit

TPL-430APK (Version v2.0R)

  • Powerline 1200 networking over existing electrical lines
  • Powerline kit includes TPL-423E and TPL-430AP
  • TPL-430AP features a dual-band wireless AC1200 access point with three gigabit ports
  • Enhanced Powerline performance and range from MIMO with Beamforming technology
  • Easy installation – TRENDnet adapters auto-connect out of the box
  • Pre-encrypted for your convenience
  • Powerline range of up to 300m (984 ft.) over existing electrical lines
  • WiFi Clone button copies your existing wireless network settings to the TPL-430AP for faster network integration
  • NDAA compliant
NDAA Compliant

TRENDnet's WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit, model TPL-430APK, uses your existing electrical outlets to create or expand a wireless network. Easily install the included TRENDnet Powerline adapters to create a high-speed powerline network. Connect the TPL-423E Powerline adapter to the router and plug the TPL-430AP WiFi Powerline adapter into a power outlet in another room where WiFi connectivity is needed. The WiFi Clone button conveniently copies your existing wireless network settings to the TPL-430AP WiFi Powerline adapter for faster network integration.

Diagram showing two Powerline adapters plugged into electrical outlets. A wireless router is connected to a non-wireless Powerline adapter below. The words ‘Auto connect’ are above a dashed line linking the two Powerline devices.

Easy Installation

Simply plug in the TRENDnet Powerline adapter and WiFi Powerline adapter, and they will auto-connect to each other right out of the box.

Diagram of a home network with two wireless powerline adapters and one non-wireless adapter connected to a wireless router. The setup uses electrical wiring to extend internet connectivity.

WiFi Everywhere™

By combining wireless and Powerline technologies, you can enjoy wireless connectivity from any power outlet in your household.

A graphic illustration showing a wireless router with buttons labeled WPS and a wireless power line adapter labeled WiFi clone, indicating easy connectivity options for network expansion.

WiFi Clone

Use your router's WPS button and the TPL-430AP's WiFi Clone button to conveniently copy your existing wireless network name and password for quick network integration.

This diagram shows how the WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit (TPL-430APK) extends WiFi coverage in a house using powerline adapters. It starts with a TEW-827DRU router connected to the internet. A TPL-423E powerline adapter is plugged into an electrical outlet near the router, connected via an Ethernet cable. The network signal is transmitted through the house's electrical wiring to another TPL-430AP powerline adapter in a different room, which then extends the WiFi signal to cover more areas. It’s a convenient way to boost WiFi in areas with weak signals without needing extra wiring.
The image shows the WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit (TPL-430APK), featuring a TPL-430AP with high-gain antennas, LED indicators, WiFi Clone button, sync button, power button, reset button, gigabit ports, and power plug, along with a TPL-423E with gigabit ports and a power plug, for extending WiFi coverage through powerline technology.
Powerline

Sync Button

Press the Sync button to change existing Powerline encryption keys

Powerline 1200

Powerline 1200 networking over existing electrical lines using all three electrical wires: the live, neutral, and ground wires to achieve faster throughput speeds

Gigabit Ports

Convenient gigabit ports to hardwire computers, smart TVs, or other network enabled devices

Compatibility

Powerline adapters are backward compatible with Powerline 600, 500, and 200 adapters

MIMO with Beamforming Technology

Enhanced performance and range

Multiple Adapters

Use up to 8 Powerline adapters on a single Powerline network

Easy Installation

TRENDnet Powerline adapters and WiFi Powerline adapters auto-connect out of the box

Wireless

Concurrent Dual-Band

AC1200: concurrent 867Mbps WiFi AC + 300Mbps WiFi N bands

Wireless Coverage

Expand your wireless coverage with MIMO antenna technology

Pre-Encrypted

For your convenience, the wireless on the WiFi Powerline adapter is pre-encrypted with a unique password

WiFi Clone

Use your router's WPS button and the TPL-430AP's WiFi Clone button to conveniently copy your existing wireless network name and password for quick network integration

TPL-430AP
Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3ab
  • IEEE 802.11a
  • IEEE 802.11b
  • IEEE 802.11g
  • IEEE 802.11n (up to 300Mbps)
  • IEEE 802.11ac (up to 867Mbps)
  • IEEE 1901
Device Interfaces
  • 3 x Gigabit LAN ports
  • WiFi Clone button
  • Reset button
  • Sync button
  • Power switch
  • LED indicators
  • Power plug
  • Type B (NEMA 5–15)
Frequency Band
  • 2–67MHz
Modulation/Protocol
  • OFDM Symbol Modulation on link synchronization, 4096/1024/256/64/8 - QAM, QPSK, BPSK, ROBO Carrier
  • CSMA/CA
Networking Distance
  • Powerline: Up to 300m (984 ft.) linear distance over electrical power lines***
Encryption
  • Wireless: WPA2-PSK
  • Powerline: 128-bit AES (Advanced Encryption Standard)
Powerline Nodes
  • Up to 8 (max.)
Overlapping Powerline Networks
  • Up to 4 (per electrical system)
Special Features
  • Auto-connects to other TRENDnet Powerline adapters
  • Additional Ethernet ports for wired connectivity
  • Automatically clones the SSID and password of your WiFi network
  • IPv6 support
  • QoS Management
  • IGMP / MLDv2 Streams
Antenna Gain
  • 2.4GHz: 2 x 3.31dBi
  • 5GHz: 2 x 4.51dBi
Wireless Output Power/Receiving Sensitivity
  • 802.11a: 16dBm (typical) / -65dBm (typical) @ 54Mbps
  • 802.11b: 20dBm (typical) / -88dBm (typical) @ 11Mbps
  • 802.11g: 15dBm (typical) / -76dBm (typical) @ 54Mbps
  • 802.11n (2.4GHz): 13dBm (typical) / -73dBm (typical) @ 300Mbps
  • 802.11n (5GHz): 16dBm (typical) / -70dBm (typical) @ 300Mbps
  • 802.11ac: 15dBm (typical) / -60dBm (typical) @ 867Mbps
Power
  • Input: 100 – 240V AC, 50/60Hz, 0.2A
  • Max. consumption 12W
Operating Temperature
  • 0° – 40° C (32° – 104° F)
Operating Humidity
  • Max. 90% non-condensing
Certifications
  • FCC
  • IC
Dimensions
  • 255 x 130 x 75mm (10.04 x 5.11 x 2.95in.)
Weight
  • 332g (11.7 oz.)
Warranty
  • 3 year
TPL-423E
Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3ab
  • IEEE 1901
Device Interfaces
  • 1 x Gigabit LAN ports
  • Sync button
  • Reset button
  • LED indicators
  • Power plug
  • Type B (NEMA 5–15) (10A max. @ 120V AC)
Frequency Band
  • 2 – 67.5MHz
Data PHY Rate
  • Up to 1200Mbps
Networking Distance
  • Powerline: Up to 300m (984 ft.) linear distance over electrical power lines***
Encryption
  • Powerline: 128-bit AES (Advanced Encryption Standard)
Powerline Nodes
  • Up to 8 (max.)
Overlapping Powerline Networks
  • Up to 4 (per electrical system)
Special Features
  • Built-in power socket
  • Auto-connects to other TRENDnet Powerline adapters
  • IPv6 support
  • IGMP / MLDv2 Streams
Power
  • Input: 100 – 240V AC, 50/60Hz, 0.2A
  • Max. consumption: Active mode: 4W; Standby mode: 0.5W
Operating Temperature
  • 0° – 50° C (32° – 122° F)
Operating Humidity
  • Max. 90% non-condensing
Certifications
  • FCC
  • IC
Dimensions
  • 120 x 60 x 65mm (4.73 x 2.4 x 2.6 in.)
Weight
  • 176g (6.2 oz.)
Warranty
  • 3 year

PACKAGE CONTENTS
  • TPL-430AP
  • TPL-423E
  • Quick Installation Guide
  • 2 x Network cable (1.5m / 5 ft.)

Do not use this unit with a power strip that is powering other devices. Max voltage cannot exceed 120V AC, 10A.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in Europe