Products » » » TV-IP572PI

Megapixel HD PoE Day/Night Internet Camera

TV-IP572PI (Version v1.0R)

See more with Megapixel resolution up to 1280 x 800 (WXGA)
Night vision up to 7.5 meters*
No need to install this camera near a power source, power and data are received through a single Ethernet cable
Program motion detection recording, recording schedules, email alerts and more with complimentary software
2-way audio

The Megapixel HD PoE Day/Night Internet Camera, model TV- IP572PI, transmits real-time Megapixel video over the Internet. Record crisp video in complete darkness for distances of up to 7.5 meters. No need to install this camera near a power source, power and data are received through a single Ethernet cable using Power over Ethernet (PoE) technology (See TRENDnet PoE Switches and Injectors).

Record 1280 x 800 Megapixel (WXGA) video at up to 30 frames per second (fps). Manage up to four video profiles to record HD video while streaming low resolution video to a compatible smart phone at the same time. Manage up to 32 TRENDnet cameras with the included complimentary camera management software. Advanced features include adjustable motion detection recording areas, email alerts, scheduled recording sessions, H.264 / MPEG-4 / MJPEG image compression, date-and-time overlays, a Micro-SD card slot for backup storage, two-way audio (speakers not included), an adjustable lens, and four times digital zoom. A wall / ceiling mounting kit is included and the camera's off white housing blends into most environments.

1 x 10/100 Mbps Auto-MDIX PoE port
Power and activity LED indicators (can be disabled)
Night vision up to 7.5 meters indoors*
2-way audio: built-in microphone and audio out port for third party speakers
4x digital zoom
Micro SD card slot**
Manual focus lens
Stream and record up to 4 different video profiles simultaneously
Stream Network camera video to a 3GPP compatible wireless device
Dynamic DNS support
High quality H.264, MPEG-4, and MJPEG video recording
Supports up to 1280 x 800 pixel resolution at up to 30 frames per second
Image controls: Brightness, contrast, auto gain control, noise reduction, saturation, sharpness, back light control, hue, frequency, flip image vertically, mirror image horizontally, and black / white mode
Event Trigger: motion detection or digital input signal
Event Action: send real-time snapshots (up to 3 before and 3 after the event) or video recording (up to 5 seconds before and 10 seconds after the event) to FTP or email
Samba client support to record to a NAS drive
Supports TCP/IP networking, Email, HTTP, Samba and other Internet protocols
System controls:

Define up to 20 user login accounts
Set the date and time or synchronize with an NTP server

Quick Universal Plug and Play (UPnP) installation
Mounting base and mounting hardware included
3-year limited warranty

TRENDnetVIEW Pro Camera Software Features

Manage up to 32 cameras
Compatible with Windows and Microsoft Server 2008
Multiple language support
Camera Viewing

Preset viewing modes
Program custom viewing modes
Full screen view
Drag and drop live feeds to a new location
Program camera cycle viewing sequence
Motion detection brings video forward
Side, top, and bottom tool bars can be hidden

Web based access from smart phones and tablets
Recording options

Program weekly recording schedules
Motion detection recording
- Define motion detection areas of any shape
- Define motion detection sensitivity
Event trigger recording
Date and time overlay
Save a single video stream to multiple locations simultaneously
Define recording quotas by recording time or space allocation
Disk clean feature condenses and optimizes old files

Real time recording stats to help manage files

Search and Playback
Navigation timeline provides a quick visual reference to the recorded content
Search continuous recordings by motion
Search recordings by motion within a defined field (a portion of the viewing area)

Time lapse playback search
Map cameras on an image such as a floor plan
Map cameras on Google Maps™

* This camera is designed for indoor use. For outdoor surveillance applications we recommend TRENDnet outdoor cameras** Micro SD card sold separately

CAMERA
General	Sensor: 1/4” CMOS Sensor Board Lens Focal Length: 4 mm F/No: 1.5 Minimum illumination: 0 lux Focus Depth: 20 cm ~ infinity View: Horizontal: 51.8 degrees Vertical: 33.8 degrees Diagonal: 59.6 degrees Digital Zoom: 4x
Audio	Built-in omni-directional microphone Sensitivity: -40 dB +/- 3 dB (5 meters max) Frequency: 100~2 Hz Codec: PCM / ADPCM External speaker output (speaker sold separately) Two-way audio with echo canceling
Day / Night	Built-in ICR Nigh vision (IR) supports up to 7.5 meters*
Hardware
Network	IEEE 802.3u 10/100 Mbps Auto-MDIX Fast Ethernet IEEE 802.3af Power over Ethernet
LED	Power, Link / Act
Micro SD slot	Supports Micro SD (SDHC, up to 32 GB)
Reset Button	Reset to factory default
Power Consumption	Max 4.95 Watts
Power	Input: 100~240V, 50/60 Hz, 0.2A Output: 5V, 1.2A external power adapter
Dimension	75 x 115 x 30 mm (2.95 x 4.5 x 1.2 in.)
Weight	125 g (4.4 oz.)
Temperature	Operating: 0°C ~ 40°C (32°F ~ 104°F) Storage: -25°C ~ 70°C (-13°F ~ 158°F)
Humidity	Max 95% (non-condensing)
Certifications	CE, FCC
Requirement
Management Interface	Internet Explorer 7.0 or above Firefox, Safari 4 - 8, and Chrome
To Run software	Windows 10, 8.1, 8, 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit) Windows Server 2003, 2008
TRENDnetVIEW Pro Software	Channel: supports up to 32 cameras Record / Playback / Motion Detection / Audio
Network Protocols	IPv4, ARP, TCP, UDP, ICMP DHCP Client, NTP Client, DNS Client, DDNS Client, SMTP Client, FTP Client HTTP Samba Client PPPoE UPnP LLTD RTP (Real Time Protocol) RTCP (Real Time Control Protocol) RTSP (Real Time Streaming Protocol) 3GPP
Management
System	Web based administration NIPCA support
Access	Up to 20 user accounts
Backup / Restore	Save / retrieve configuration files
Log	System log up to 500 entries
Micro SD	View, download, delete files Format and remove Micro SD card
Settings
Image	Brightness, contrast, saturation, sharpness, white balance, flip, mirror (horizontal / vertical), black & white, indoor, outdoor, schedule mode Shutter: 1/3.25s, 1/7.5s, 1/10s, and 1/15s
Video Setting	Profile 1: H.264 / MPEG-4 Resolution: 1280 x 800, 640 x 400, 320 x 192, 160 x 96 Max frame rate: 30fps Profile 2: H.264 / MPEG-4 Resolution: 640 x 400, 320 x 192, 160 x 96 Max frame rate: 30fps Profile 3: MJPEG Resolution: 1280 x 800, 640 x 400, 320 x 192, 160 x 96 Max frame rate: 1280 x 800 @ 5fps, 640 x 400 / 320 x 192 @ 30fps JPEG quality: Low, Fair, Standard, Good, Excellent Profile 4: H.264 / MPEG-4 Resolution: 640 x 400, 320 x 192, 160 x 96 Max frame rate: 30fps RTSP: http://ipcamera_ip/3gpp
3GPP	Video codec: MPEG-4 (no audio support) Protocols: RTSP, RTP
Recording	Resolution: Define individual resolution for up to 4 profiles Required storage: 32MB (minimum per profile) Recording type: event based (motion detection), continuous, and scheduled
Event Action	Trigger event: motion detection Action: send real-time snapshot or video recording to FTP or email
Port Settings	HTTP port: 80 (default) RTSP port: 554 (default)
Time	Synchronize with NTP server or set time / date manually

PACKAGE CONTENTS

TV-IP572PI
CD-ROM (Utility & User's Guide)
Multi-Language Quick Installation Guide
Network cable (1.5 m / 5 ft.)
Power adapter (5V, 1.2A)
Camera mounting kit

Compatible NVR: www.trendnet.com/info/tv-nvr104

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Product Spotlight: Megapixel HD PoE Day/Night Internet Camera TV-IP572PI

DIY: Viewing IP Cameras Over The Internet

DIY: Camera Mounting Tips

DIY Video: Predicting Camera Viewing Field Sizes

TRENDnetView App (Apple® and Android®)

TRENDnetView Pro Camera Software Video

DIY: Using PoE Technology to Install IP Cameras

Product Spotlight - TV-IP572PI