This page enables you to set wireless communications parameters for the router's wireless LAN feature. Click the items below for more information:
This page enables you to enable and disable the wireless LAN function, enter a SSID, and set the channel for wireless communications. Enable/Disable: Enables and disables wireless LAN via the router. SSID: Type an SSID in the text box. The SSID of any wireless device must match the SSID typed here in order for the wireless device to access the LAN and WAN via the router. Channel: Select a transmission channel for wireless communications. The channel of any wireless device must match the channel selected here in order for the wireless device to access the LAN and WAN via the router.
This screen enables you to set WEP parameters for secure wireless communications. Mode: Select the level of encryption you want from the drop-down list. The router supports, 64-, 128-, and 256-bit encryption. Key 1 ~ Key 4: Enables you to create an encryption scheme for Wireless LAN transmissions. Manually enter a set of values for each key. Select the which key you want to use by clicking the radio button next to the key. Click Clear to erase key values. Note: 256- and 128-bit encryption require more system resources than 64-bit encryption. Use 64-bit encryption for better performance.
This screen enables you to configure advanced wireless functions. Firmware Version: Displays the wireless function firmware version. The wireless firmware is updated when you update the router firmware. Beacon Interval: Type the beacon interval in the text box. You can specify a value from 1 to 1000. The default beacon interval is 100. RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value stabilizes data flow. If data flow is irregular, choose values between 256 and 2432 until data flow is normalized. Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet transfer error rates are high, choose values between 256 and 2432 until packet transfer rates are minimized. Note: Setting the fragmentation threshold value may diminish system performance. DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text box. You can specify a value between 1 and 65535. The default value is 3. Basic Rates (MBps): Select one of the wireless LAN receive rates, measured in megabytes per second. TX Rates (MBps): Select one of the wireless communications transfer rates, measured in megabytes per second, based upon the speed of wireless adapters connected to the WLAN. Preamble Type: Select either a short preamble or long preamble. Select a short preamble for WLANs with high network traffic; select a long preamble when the network traffic is low. Authentication Type: Select the authentication type. Open System allows public access to the router via wireless communications. Shared Key requires the user to set a WEP key to exchange data with other wireless clients that have the same WEP key. SSID Broadcast: Enables and disables a Service Set Identifier broadcast. When enabled, the SSID of the router is sent to wireless enabled devices on the LAN. Set the router's SSID in the Basic screen.
|