This wizard will guide you through a step-by-step process to configure your new router and connect to the Internet.
The router is detecting your Internet connection type. Please wait...
Please select the Internet connection type below:
To set up this connection, make sure that the router is connected to the PC that was originally connected to your broadband connection. Click the Clone Your PC's MAC address button to copy the computer's MAC address to the MAC Address field.
To set up this connection you will need to have a Username and Password from your Internet Service Provider. If you do not have this information, please contact your ISP.
Note: You may also need to provide a Service Name. If you do not have or know this information, please contact your ISP.
To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need a PPTP IP address. If you do not have this information, please contact your ISP.
To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need an L2TP IP address. If you do not have this information, please contact your ISP.
To set up this connection you will need to have a complete list of IP information provided by your Internet Service Provider. If you have a Static IP connection and do not have this information, please contact your ISP.
Give your Wi-Fi network a name and a password. (2.4GHz Band)
Give your Wi-Fi network a password.
Give your Wi-Fi network a name and a password. (5GHz Band)
Below is a detailed summary of your Wi-Fi security settings. Please print this page out or write the information on a piece of paper so that you can configure the correct settings on your Wi-Fi devices.
Your settings are being saved.
Please wait...
Checking WAN connectivity...