SNMP Traps

Here you can set up the SNMP traps sent by the , provided you selected the SNMP traps somewhere into the Alarm page.

After you have made all modifications, click Store Settings to save your settings and then hit Apply Settings/Restart Servers to validate these new settings. Every change you have made on this page will NOT apply until you hit Apply Settings/Restart Servers!   

Settings

Primary Manager: Specify here the IP address of the Primary SNMP manager device on your network.
 
Secondary Manager: Specify here the IP address of the Secondary SNMP manager device on your network (if any).

SNMP Community: Specify here the name of the SNMP Community to which your SNMP Management host and SNMP agent should belong.

Note: the SNMP manager and agents must belong to an SNMP community identified by its name, which is a collection of hosts grouped together for administrative purposes.