The QoS (Quality of Service) feature allows you specify priorities for different traffic. Lower priority traffic will be slowed down to allow greater throughput or less delay for high priority traffic.

General Setting

QoS Setting	To disable QoS (Quality of Service), keep the default setting, Disable. To enable QoS (Quality of Service), click Enable.
Management Type	Choose either "Rate Control" or "Priority" as managemtne type.
WAN Setting	Enter the desired value to control WAN throughput.
Get from WAN	Get the Downstream and Upstream from WAN and set them at the same time.

Category

Applications	Set priority for widely-used applications such as FTP, HTTP, Telnet, SMTP, POP3, MSN on the table.
Self-define	Set priority for self-defined applications on specific port ranges.

Summary Table

Priority	Priority levels from High, Normal to Low.
Name	Special or self-defined application name.
Information	Details about every QoS item.