Options

Worldwide Mode (1202.11d)

Enable this setting if you wish to use this mode, and your Wireless stations support this mode.

WMM (Wi-Fi Multimedia)

Enable WMM Support	Check this to enable WMM (Wi-Fi Multimedia) support in the Access Point. If WMM is also supported by your wireless clients, voice and multimedia traffic will be given a higher priority than other traffic.
No Acknowledgement	If enabled, then WMM acknowledgement is disabled. Depending on the environment, disabling acknowledgement may increase throughput slightly.

Parameters

Disassociated Timeout	This determines how quickly a Wireless Station will be considered "Disassociated" with this AP, when no traffic is received. Enter the desired time period.
Fragmentation	Enter the preferred setting between 256 and 2346. Normally, this can be left at the default value.
Beacon Interval	Enter the preferred setting between 20 and 1000. Normally, this can be left at the default value.
RTS/CTS Threshold	Enter the preferred setting between 256 and 2346. Normally, this can be left at the default value.
Preamble Type	Select the desired option. The default is "Long". The "Short" setting takes less time when used in a good environment.