AC2600 StreamBoost™ MU-MIMO WiFi Router
TEW-827DRU
redirect
System Log
This section displays the device logging information for monitoring and troubleshooting purposes.
Save Log
Export
System Log
Enable System Log
Syslog Server IP Address
<<
Computer Name
Nov 17 04:48:05 [ 0.488253] Partition(from smem) TZ -- Offset:3c Size:14 <br>Nov 17 04:48:05 [ 0.488253] Partition(from smem) RPM -- Offset:50 Size:14 <br>Nov 17 04:48:05 [ 0.488284] Partition(from smem) APPSBL -- Offset:64 Size:28 <br>Nov 17 04:48:05 [ 0.488284] Partition(from smem) APPSBLENV -- Offset:8c Size:4 <br>Nov 17 04:48:05 [ 0.488316] Partition(from smem) ART -- Offset:90 Size:a <br>Nov 17 04:48:05 [ 0.488347] Partition(from smem) rootfs -- Offset:9a Size:200 <br>Nov 17 04:48:05 [ 0.488347] Partition(from smem) BOOTCONFIG -- Offset:29a Size:3 <br>Nov 17 04:48:05 [ 0.488378] Partition(from smem) APPSBL_1 -- Offset:29d Size:28 <br>Nov 17 04:48:05 [ 0.488378] Partition(from smem) rootfs_1 -- Offset:2c5 Size:200 <br>Nov 17 04:48:05 [ 0.488409] SMEM boot info a5a3a1a0, 0: 3 <br>Nov 17 04:48:05 [ 0.502061] acpuclk-ipq806x acpuclk-ipq806x: SPEED BIN: 0 <br>Nov 17 04:48:05 [ 0.502061] acpuclk-ipq806x acpuclk-ipq806x: ACPU PVS: 1 <br>Nov 17 04:48:05 [ 0.508872] acpuclk-ipq806x acpuclk-ipq806x: CPU0: 6 frequencies supported <br>Nov 17 04:48:05 [ 0.508872] acpuclk-ipq806x acpuclk-ipq806x: CPU1: 6 frequencies supported <br>Nov 17 04:48:05 [ 0.510496] msm_rpm_log_probe: OK <br>Nov 17 04:48:05 [ 0.534426] squashfs: version 4.0 (2009/01/31) Phillip Lougher <br>Nov 17 04:48:05 [ 0.534457] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. <br>Nov 17 04:48:05 [ 0.536332] msgmni has been set to 932 <br>Nov 17 04:48:05 [ 0.538144] io scheduler noop registered <br>Nov 17 04:48:05 [ 0.538175] io scheduler deadline registered (default) <br>Nov 17 04:48:05 [ 0.539987] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled <br>Nov 17 04:48:05 [ 0.543267] msm_serial_hs.0: ttyHS0 at MMIO 0x12490000 (irq = 227) is a MSM HS UART <br>Nov 17 04:48:05 [ 0.543892] msm_serial_hs module loaded <br>Nov 17 04:48:05 [ 0.544079] msm_serial_hsl: detected port #1 <br>Nov 17 04:48:05 [ 0.544204] msm_serial_hsl.1: ttyHSL1 at MMIO 0x16340000 (irq = 184) is a MSM <br>Nov 17 04:48:05 [ 0.544642] msm_serial_hsl: console setup on port #1 <br>Nov 17 04:48:05 [ 1.325866] console [ttyHSL1] enabled <br>Nov 17 04:48:05 [ 1.341393] ahci ahci.0: forcing PORTS_IMPL to 0x1 <br>Nov 17 04:48:05 [ 1.345235] ahci ahci.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode <br>Nov 17 04:48:05 [ 1.353108] ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst <br>Nov 17 04:48:05 [ 1.362136] scsi0 : ahci_platform <br>Nov 17 04:48:05 [ 1.365135] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 241 <br>Nov 17 04:48:05 [ 1.374757] msm_nand_probe: phys addr 0x1ac00000 <br>Nov 17 04:48:05 [ 1.378412] msm_nand_probe: dmac 0x3 <br>Nov 17 04:48:05 [ 1.382005] msm_nand_probe: allocated dma buffer at ffdfc000, dma_addr 5f510000 <br>Nov 17 04:48:05 [ 1.390565] status: 20 <br>Nov 17 04:48:05 [ 1.391908] nandid: 1590aac2 maker c2 device aa <br>Nov 17 04:48:05 [ 1.396938] ONFI probe : Found an ONFI compliant device MX30UF2G18AB � <br>Nov 17 04:48:05 [ 1.403717] Found a supported NAND device <br>Nov 17 04:48:05 [ 1.407528] NAND Controller ID : 0x4030 <br>Nov 17 04:48:05 [ 1.411340] NAND Device ID : 0x1590aac2 <br>Nov 17 04:48:05 [ 1.415307] Buswidth : 8 Bits <br>Nov 17 04:48:05 [ 1.418213] Density : 256 MByte <br>Nov 17 04:48:05 [ 1.421399] Pagesize : 2048 Bytes <br>Nov 17 04:48:05 [ 1.424867] Erasesize: 131072 Bytes <br>Nov 17 04:48:05 [ 1.428178] Oobsize : 64 Bytes <br>Nov 17 04:48:05 [ 1.431302] CFG0 Init : 0xa8d408c0 <br>Nov 17 04:48:05 [ 1.434832] CFG1 Init : 0x0004745c <br>Nov 17 04:48:05 [ 1.438238] ECCBUFCFG : 0x00000203 <br>Nov 17 04:48:05 [ 1.442455] Creating 15 MTD partitions on msm_nand : <br>Nov 17 04:48:05 [ 1.446829] 0x000000000000-0x000000040000 : SBL1 <br>Nov 17 04:48:05 [ 1.454545] 0x000000040000-0x000000180000 : MIBIB <br>Nov 17 04:48:05 [ 1.462355] 0x000000180000-0x0000002c0000 : SBL2 <br>Nov 17 04:48:05 [ 1.470134] 0x0000002c0000-0x000000540000 : SBL3 <br>Nov 17 04:48:05 [ 1.479568] 0x000000540000-0x000000660000 : DDRCONFIG <br>Nov 17 04:48:05 [ 1.487753] 0x000000660000-0x000000780000 : SSD <br>Nov 17 04:48:05 [ 1.495282] 0x000000780000-0x000000a00000 : TZ <br>Nov 17 04:48:05 [ 1.504686] 0x000000a00000-0x000000c80000 : RPM <br>Nov 17 04:48:05 [ 1.513995] 0x000000c80000-0x000001180000 : APPSBL <br>Nov 17 04:48:05 [ 1.526679] 0x000001180000-0x000001200000 : APPSBLENV <br>Nov 17 04:48:05 [ 1.534176] 0x000001200000-0x000001340000 : ART <br>Nov 17 04:48:05 [ 1.541861] 0x000001340000-0x000005340000 : rootfs <br>Nov 17 04:48:05 [ 1.633083] mtd: partition rootfs set to be root filesystem <br>Nov 17 04:48:05 [ 1.638144] split_squashfs: no squashfs found in msm_nand <br>Nov 17 04:48:05 [ 1.643455] 0x000005340000-0x0000053a0000 : BOOTCONFIG <br>Nov 17 04:48:05 [ 1.651608] 0x0000053a0000-0x0000058a0000 : APPSBL_1 <br>Nov 17 04:48:05 [ 1.665104] 0x0000058a0000-0x0000098a0000 : rootfs_1 <br>Nov 17 04:48:05 [ 1.722649] ata1: SATA link down (SStatus 0 SControl 300) <br>Nov 17 04:48:05 [ 1.791533] UBI: smallest flash I/O unit: 2048 <br>Nov 17 04:48:05 [ 1.796251] UBI: VID header offset: 2048 (aligned 2048) <br>Nov 17 04:48:05 [ 1.802186] UBI: data offset: 4096 <br>Nov 17 04:48:05 [ 2.312214] UBI: max. sequence number: 119 <br>Nov 17 04:48:05 [ 2.329084] UBI: attached mtd11 to ubi0 <br>Nov 17 04:48:05 [ 2.331896] UBI: MTD device name: rootfs <br>Nov 17 04:48:05 [ 2.336957] UBI: MTD device size: 64 MiB <br>Nov 17 04:48:05 [ 2.341768] UBI: number of good PEBs: 512 <br>Nov 17 04:48:05 [ 2.346422] UBI: number of bad PEBs: 0 <br>Nov 17 04:48:05 [ 2.350796] UBI: number of corrupted PEBs: 0 <br>Nov 17 04:48:05 [ 2.355263] UBI: max. allowed volumes: 128 <br>Nov 17 04:48:05 [ 2.359825] UBI: wear-leveling threshold: 4096 <br>Nov 17 04:48:05 [ 2.364636] UBI: number of internal volumes: 1 <br>Nov 17 04:48:05 [ 2.368947] UBI: number of user volumes: 3 <br>Nov 17 04:48:05 [ 2.373414] UBI: available PEBs: 0 <br>Nov 17 04:48:05 [ 2.377819] UBI: total number of reserved PEBs: 512 <br>Nov 17 04:48:05 [ 2.382692] UBI: number of PEBs reserved for bad PEB handling: 5 <br>Nov 17 04:48:05 [ 2.388659] UBI: max/mean erase counter: 29/22 <br>Nov 17 04:48:05 [ 2.393127] UBI: image sequence number: 245104126 <br>Nov 17 04:48:05 [ 2.397875] UBI: background thread ubi_bgt0d started, PID 643 <br>Nov 17 04:48:05 [ 2.445235] GPIO Bitbanged MDIO: probed <br>Nov 17 04:48:05 [ 2.455576] cpuidle: using governor ladder <br>Nov 17 04:48:05 [ 2.458669] cpuidle: using governor menu <br>Nov 17 04:48:05 [ 2.464229] TCP: cubic registered <br>Nov 17 04:48:05 [ 2.466510] NET: Registered protocol family 17 <br>Nov 17 04:48:05 [ 2.471165] Bridge firewalling registered <br>Nov 17 04:48:05 [ 2.475507] 8021q: 802.1Q VLAN Support v1.8 <br>Nov 17 04:48:05 [ 2.479287] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 <br>Nov 17 04:48:05 [ 2.487035] Registering SWP/SWPB emulation handler <br>Nov 17 04:48:05 [ 2.507341] ipq_nss_get_mac_addr: MAC[0]: ff:ff:ff:ff:ff:ff <br>Nov 17 04:48:05 [ 2.512152] ipq_nss_get_mac_addr: MAC[1]: ff:ff:ff:ff:ff:ff <br>Nov 17 04:48:05 [ 2.517713] ipq_nss_get_mac_addr: MAC[2]: ff:ff:ff:ff:ff:ff <br>Nov 17 04:48:05 [ 2.523273] ipq_nss_get_mac_addr: MAC[3]: ff:ff:ff:ff:ff:ff <br>Nov 17 04:48:05 [ 2.528741] no pmic restart interrupt specified <br>Nov 17 04:48:05 [ 2.534707] msm_cache_dump_probe: could not register L2 buffer ret = -22. <br>Nov 17 04:48:05 [ 9.957950] usbcore: registered new interface driver hub <br>Nov 17 04:48:05 [ 9.963355] usbcore: registered new device driver usb <br>Nov 17 04:48:05 [ 10.074976] md: linear personality registered for level -1 <br>Nov 17 04:48:05 [ 10.123367] md: raid0 personality registered for level 0 <br>Nov 17 04:48:05 [ 10.136051] md: raid1 personality registered for level 1 <br>Nov 17 04:48:05 [ 10.169821] Button Hotplug driver version 0.4.1 <br>Nov 17 04:48:05 [ 10.213995] NTFS driver 2.1.30 [Flags: R/O MODULE]. <br>Nov 17 04:48:05 [ 10.358388] PPP generic driver version 2.4.2 <br>Nov 17 04:48:05 [ 10.512246] tun: Universal TUN/TAP device driver, 1.6 <br>Nov 17 04:48:05 [ 10.516338] tun: (C) 1999-2004 Max Krasnyansky 'maxk@qualcomm.com' <br>Nov 17 04:48:05 [ 10.545829] PPP MPPE Compression module registered <br>Nov 17 04:48:05 [ 10.577694] ********************************************************** <br>Nov 17 04:48:05 [ 10.583005] * Driver :NSS GMAC Driver for RTL v(3.72a) <br>Nov 17 04:48:05 [ 10.588378] * Version :1.0 <br>Nov 17 04:48:05 [ 10.591252] * Copyright :Copyright (c) 2013-2014 The Linux Foundation. All rights reserved. <br>Nov 17 04:48:05 [ 10.599593] ********************************************************** <br>Nov 17 04:48:05 [ 10.606591] GMAC1(dd989480) Invalid MAC@ - using a2:a3:a4:a5:a6:a7 <br>Nov 17 04:48:05 [ 10.618431] GMAC2(dd98ac80) Invalid MAC@ - using 4e:4f:50:51:52:53 <br>Nov 17 04:48:05 [ 10.692252] L2TP core driver, V2.0 <br>Nov 17 04:48:05 [ 10.702467] L2TP netlink interface <br>Nov 17 04:48:05 [ 10.846579] nss_driver - fw of size 352512 bytes copied to load addr: 40000000, nss_id : 0 <br>Nov 17 04:48:05 [ 10.873820] nss_driver - Turbo Support 1 <br>Nov 17 04:48:05 [ 10.878006] bf279e59: NSS Shaping is enabled, handler id: 0 <br>Nov 17 04:48:05 [ 10.924773] nss_driver - fw of size 5392 bytes copied to load addr: 40800000, nss_id : 1 <br>Nov 17 04:48:05 [ 10.934614] Error - Duplicate Interface CB Registered for interface 75 <br>Nov 17 04:48:05 [ 10.940081] Error - Duplicate Interface CB Registered for interface 78 <br>Nov 17 04:48:05 [ 10.985098] IPv6 over IPv4 tunneling driver <br>Nov 17 04:48:05 [ 11.060356] gre: GRE over IPv4 demultiplexor driver <br>Nov 17 04:48:05 [ 11.089065] ip_gre: GRE over IPv4 tunneling driver <br>Nov 17 04:48:05 [ 11.124179] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) <br>Nov 17 04:48:05 [ 11.172945] ip_tables: (C) 2000-2006 Netfilter Core Team <br>Nov 17 04:48:05 [ 11.325085] NET: Registered protocol family 24 <br>Nov 17 04:48:05 [ 11.477850] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <br>Nov 17 04:48:05 [ 11.483442] msm_hsusb_host msm_hsusb_host: unable to find transceiver <br>Nov 17 04:48:05 [ 11.523836] nf_conntrack version 0.5.0 (7474 buckets, 29896 max) <br>Nov 17 04:48:05 [ 11.669603] PPPoL2TP kernel driver, V2.0 <br>Nov 17 04:48:05 [ 11.680349] PPTP driver version 0.8.5 <br>Nov 17 04:48:05 [ 11.811027] /proc/router_ip created <br>Nov 17 04:48:05 [ 11.947047] xt_time: kernel timezone is -0000 <br>Nov 17 04:48:05 [ 12.260949] nf_conntrack_rtsp v0.6.21 loading <br>Nov 17 04:48:05 [ 12.272196] nf_nat_rtsp v0.6.21 loading <br>Nov 17 04:48:05 [ 12.283067] Netfilter messages via NETLINK v0.30. <br>Nov 17 04:48:05 [ 12.310965] ip6_tables: (C) 2000-2006 Netfilter Core Team <br>Nov 17 04:48:05 [ 12.458263] ctnetlink v0.93: registering with nfnetlink. <br>Nov 17 04:48:05 [ 12.497500] xt_mark2prio: module license 'unspecified' taints kernel. <br>Nov 17 04:48:05 [ 12.502999] Disabling lock debugging due to kernel taint <br>Nov 17 04:48:05 [ 12.554764] ipq-dwc3 ipq-dwc3.0: unable to read platform data num of dbm eps <br>Nov 17 04:48:05 [ 12.661793] xhci-hcd xhci-hcd.0: xHCI Host Controller <br>Nov 17 04:48:05 [ 12.665916] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 <br>Nov 17 04:48:05 [ 12.673164] xhci-hcd xhci-hcd.0: irq 142, io mem 0x11000000 <br>Nov 17 04:48:05 [ 12.679006] xHCI xhci_add_endpoint called for root hub <br>Nov 17 04:48:05 [ 12.679006] xHCI xhci_check_bandwidth called for root hub <br>Nov 17 04:48:05 [ 12.679287] hub 1-0:1.0: USB hub found <br>Nov 17 04:48:05 [ 12.682318] hub 1-0:1.0: 1 port detected <br>Nov 17 04:48:05 [ 12.686410] xhci-hcd xhci-hcd.0: xHCI Host Controller <br>Nov 17 04:48:05 [ 12.691252] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 <br>Nov 17 04:48:05 [ 12.698812] xHCI xhci_add_endpoint called for root hub <br>Nov 17 04:48:05 [ 12.698812] xHCI xhci_check_bandwidth called for root hub <br>Nov 17 04:48:05 [ 12.699000] hub 2-0:1.0: USB hub found <br>Nov 17 04:48:05 [ 12.702186] hub 2-0:1.0: 1 port detected <br>Nov 17 04:48:05 [ 12.707903] ipq-dwc3 ipq-dwc3.1: unable to read platform data num of dbm eps <br>Nov 17 04:48:05 [ 12.814557] xhci-hcd xhci-hcd.1: xHCI Host Controller <br>Nov 17 04:48:05 [ 12.818587] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 <br>Nov 17 04:48:05 [ 12.825898] xhci-hcd xhci-hcd.1: irq 237, io mem 0x10000000 <br>Nov 17 04:48:05 [ 12.831771] xHCI xhci_add_endpoint called for root hub <br>Nov 17 04:48:05 [ 12.831771] xHCI xhci_check_bandwidth called for root hub <br>Nov 17 04:48:05 [ 12.831958] hub 3-0:1.0: USB hub found <br>Nov 17 04:48:05 [ 12.835082] hub 3-0:1.0: 1 port detected <br>Nov 17 04:48:05 [ 12.839112] xhci-hcd xhci-hcd.1: xHCI Host Controller <br>Nov 17 04:48:05 [ 12.844017] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 <br>Nov 17 04:48:05 [ 12.851546] xHCI xhci_add_endpoint called for root hub <br>Nov 17 04:48:05 [ 12.851546] xHCI xhci_check_bandwidth called for root hub <br>Nov 17 04:48:05 [ 12.851733] hub 4-0:1.0: USB hub found <br>Nov 17 04:48:05 [ 12.854951] hub 4-0:1.0: 1 port detected <br>Nov 17 04:48:05 [ 13.031552] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <br>Nov 17 04:48:05 [ 13.062386] Registered led device: ap148:green:usb_1 <br>Nov 17 04:48:05 [ 13.062542] Registered led device: ap148:green:status <br>Nov 17 04:48:05 [ 13.086785] Initializing USB Mass Storage driver... <br>Nov 17 04:48:05 [ 13.090815] usbcore: registered new interface driver usb-storage <br>Nov 17 04:48:05 [ 13.096626] USB Mass Storage support registered. <br>Nov 17 04:37:27 [ 21.795532] ADDRCONF(NETDEV_UP): lo: link is not ready <br>Nov 17 04:37:27 [ 21.801093] ADDRCONF(NETDEV_UP): eth0: link is not ready <br>Nov 17 04:37:27 [ 21.828772] ADDRCONF(NETDEV_UP): eth1: link is not ready <br>Nov 17 04:37:28 [ 22.864011] device eth1 entered promiscuous mode <br>Nov 17 04:37:28 [ 22.868009] br-lan: port 1(eth1) entered forwarding state <br>Nov 17 04:37:28 [ 22.873008] br-lan: port 1(eth1) entered forwarding state <br>Nov 17 04:37:28 [ 22.879412] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready <br>Nov 17 04:37:28 Interface 'lan' is enabled <br>Nov 17 04:37:28 Interface 'lan' is now up <br>Nov 17 04:37:28 Interface 'lan' is setting up now <br>Nov 17 04:37:28 Network device 'eth1' link is up <br>Nov 17 04:37:28 Bridge 'br-lan' link is up <br>Nov 17 04:37:28 Interface 'lan' has link connectivity <br>Nov 17 04:37:28 Interface 'lan' is now up <br>Nov 17 04:37:28 Interface 'wan' is enabled <br>Nov 17 04:37:28 Interface 'fake' is enabled <br>Nov 17 04:37:28 [ 22.905654] ADDRCONF(NETDEV_UP): eth0: link is not ready <br>Nov 17 04:37:28 Interface 'fake' is now up <br>Nov 17 04:37:28 Interface 'fake' is setting up now <br>Nov 17 04:37:28 Interface 'fake' is now up <br>Nov 17 04:37:28 Interface 'loopback' is enabled <br>Nov 17 04:37:28 Network device 'lo' link is up <br>Nov 17 04:37:28 Interface 'loopback' has link connectivity <br>Nov 17 04:37:28 Interface 'loopback' is now up <br>Nov 17 04:37:28 Interface 'loopback' is setting up now <br>Nov 17 04:37:28 Interface 'loopback' is now up <br>Nov 17 04:37:28 Interface 'wan' is setting up now <br>Nov 17 04:37:28 wan (2026): udhcpc (v1.19.4) started <br>Nov 17 04:37:28 wan (2026): Sending discover... <br>Nov 17 04:37:29 [ 24.617338] eth0: 100Mbps FullDuplex <br>Nov 17 04:37:29 [ 24.619900] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <br>Nov 17 04:37:29 Network device 'eth0' link is up <br>Nov 17 04:37:29 Interface 'wan' has link connectivity <br>Nov 17 04:37:29 Interface 'fake' has link connectivity <br>Nov 17 04:37:30 [ 24.872383] br-lan: port 1(eth1) entered forwarding state <br>Nov 17 04:37:31 wan (2026): Sending discover... <br>Nov 17 04:37:31 wan (2026): Sending select for 10.10.0.121... <br>Nov 17 04:37:31 wan (2026): Lease of 10.10.0.121 obtained, lease time 604800 <br>Nov 17 04:37:31 wan (2026): uci: Entry not found <br>Nov 17 04:37:31 wan (2026): sh: !=: argument expected <br>Nov 17 04:37:31 Interface 'wan' is now up <br>Nov 17 04:37:41 [ 36.473445] ath_hal: 0.9.17.1 (AR5416, AR9380, WRITE_EEPROM, 11D) <br>Nov 17 04:37:41 [ 36.521680] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved <br>Nov 17 04:37:41 [ 36.540456] ath_dfs: Version 2.0.0 <br>Nov 17 04:37:41 [ 36.540456] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved <br>Nov 17 04:37:41 [ 36.561199] ath_spectral: Version 2.0.0 <br>Nov 17 04:37:41 [ 36.561199] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved <br>Nov 17 04:37:41 [ 36.571977] SPECTRAL module built on Nov 17 2015 19:46:09 <br>Nov 17 04:37:41 [ 36.611840] ath_tx99: Version 2.0 <br>Nov 17 04:37:41 [ 36.611840] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved <br>Nov 17 04:37:41 [ 36.705716] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved <br>Nov 17 04:37:43 [ 38.089065] ath_pci: (Atheros/multi-bss) <br>Nov 17 04:37:43 [ 38.092096] ath_pci_probe <br>Nov 17 04:37:43 [ 38.094907] PCI device id is 0040 :0040 <br>Nov 17 04:37:43 [ 38.098500] PCI: enabling device 0000:01:00.0 (0140 -' 0142) <br>Nov 17 04:37:43 [ 38.104529] ath_pci 0000:01:00.0: ath DEBUG: sc=0xdab62200 <br>Nov 17 04:37:43 [ 38.109621] <br>Nov 17 04:37:43 [ 38.109621] ol_ath_pci_configure : num_desired MSI set to 0 <br>Nov 17 04:37:43 [ 38.116994] <br>Nov 17 04:37:43 [ 38.116994] Using PCI Legacy Interrupt <br>Nov 17 04:37:43 [ 38.122024] chip_id 9 chip_revision 1 <br>Nov 17 04:37:43 [ 38.126429] <br>Nov 17 04:37:43 [ 38.126429] address 4008f8 data ddabdc30 <br>Nov 17 04:37:43 [ 38.132489] <br>Nov 17 04:37:43 [ 38.132489] address 401e90 data ddabdc34 <br>Nov 17 04:37:43 [ 38.139112] <br>Nov 17 04:37:43 [ 38.139112] address 401e94 data ddabdc38 <br>
Product Warranty Registration