TRENDnet's 14 dBi WiFi AC867 Outdoor PoE Preconfigured Point-to-Point Bridge Kit, model TEW-840APBO2K, provides long-range wireless AC867 point-to-point connectivity.This preconfigured outdoor WiFi bridge kit provides installers the simplest way to create a long-distance wireless point-to-point bridge. The outdoor WiFi bridge kit conveniently links two locations together with wireless AC speed and performance. The IP56 rated housing is designed for outdoor environments, and includes wall and pole mounting hardware.
![Illustration of a preconfigured point-to-point bridge with two structures emitting wireless signals, indicating connectivity.](/images/products/keypoints/TEW-840APBO2K/Bridge.png)
Preconfigured Point-to-Point Bridge
Reduce installation and setup time with this preconfigured and pre-encrypted long-range outdoor WiFi bridge kit.
![Diagram of a Preconfigured Point-to-Point Bridge connected via PoE adapter. The bridge device is connected to a PoE port and a LAN port through two cables.](/images/products/keypoints/TEW-840APBO2K/PowerAdapters.png)
PoE Power Adapters
Included proprietary PoE power adapters provide power and data over a single Ethernet cable with a maximum distance of 60m (197 ft.).
![Graphic with two symbols and a label indicating IP56 rating. The first symbol represents dust protection, and the second symbol indicates water resistance. Below the symbols, IP56 is displayed in bold, signifying protection from dust particles and water.](/images/products/keypoints/TEW-840APBO2K/IP56 .png)
Outdoor Ready
Built for outdoor environments with an IP56 weather rating, and an operating temperature range of -10° – 60° C (14° – 140° F).
Standards | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.1d
- IEEE 802.1Q VLAN
- IEEE 802.1X network based authentication
- IEEE 802.11d
- IEEE 802.11e
- IEEE 802.11h
- IEEE 802.11i
- IEEE 802.11a
- IEEE 802.11r
- IEEE 802.11k
- IEEE 802.11n (5GHz up to 300Mbps @ 64QAM)
- IEEE 802.11ac Wave 2 MU-MIMO (5GHz up to 867Mbps @ 256QAM)
|
Hardware Interface | - 1 x Gigabit PoE-in LAN1 port (proprietary PoE max. cable length 60m (197 ft.))
- 1 x Gigabit LAN2 port
- LED indicators
- Reset button
|
Special Features | - IP56 weather rated
- 802.1Q VLAN
- WiFi scheduling
- Scheduled auto reboot
- CSMA/TDMA support
- Preconfigured point-to-point bridge kit
|
Access Control | - Wireless AP mode encryption: WPA2-PSK, WPA2-Enterprise
- Wireless WDS bridge mode encryption (CSMA): WEP, AES
- Wireless WDS AP/Station encryption (CSMA/TDMA): WPA2-PSK, WPA2-Enterprise
- Access Controls: MAC (AP & WDS AP mode only), Layer 2 isolation, client Isolation
- Client limit
- Bandwidth limit (download/upload) per SSID or per client
- RSSI Threshold
|
QoS | |
Operation Modes | - Access Point (AP)
- WDS Access Point
- WDS Bridge (CSMA mode only)
- WDS Station
- Client Bridge
|
SSID | - Up to 7 SSIDs
- 802.1Q VLAN assignment per SSID
|
Management/Monitoring | - Web management (HTTP)
- CLI management (Telnet, SSHv2)
- SNMP v2c/v3
- IPv4 (DHCP/static IP), IPv6 (link-local, static IP, DHCPv6) assignment
- Email alert
- Upgrade firmware
- Backup/restore configuration
- Internal logging
- External syslog
- Scheduled automatic reboot
- Restore to factory defaults
- Ping test
- Traceroute
- Nslookup
- NTP
- Management VLAN ID
- Schedule radio on/off per SSID
- Real time traffic monitor
- Real time CPU load monitor
- Device discovery (Point to point AP connections only)
- Speed test (Point to point AP connections only)
- LED control
|
Frequency | - FCC: 5.150GHz – 5.250GHz, 5.725GHz – 5.850GHz
|
Wireless Channels | - FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165
- CA: 149, 153, 157, 161, 165
|
Modulation | - 802.11a: OFDM with BPSK, QPSK and 16/64-QAM
- 802.11n (5GHz): BPSK, QPSK, 16-QAM, 64-QAM with OFDM
- 802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM
|
Media Access Protocol | - CSMA/CA with ACK mode
- TDMA (Point to point AP connections only)
|
Antenna Gain | - 14 dBi internal patch antenna
|
Wireless Output Power (max output power without antenna gain) | - 802.11a: FCC: 23 dBm (max.)
- 802.11n (5GHz): FCC: 22 dBm (max.)
- 802.11ac: FCC: 22 dBm (max.)
- Receiving Sensitivity (per chain)
- 802.11a: -71 dBm (typical) @ 54Mbps
- 802.11n (5GHz): -66 dBm (typical) @ 300Mbps
- 802.11ac: -55 dBm (typical) @ 867Mbps
|
Power | - Input: 100 – 240V AC, 50/60Hz, 0.4A
- Output: 24V DC, 0.6A proprietary/passive PoE injector
- Max. Consumption: 9.5W
|
Surge Protection | |
ESD Protection | |
Operating Temperature | - -22° - 60° C ( -7.6° - 140° F)
|
Operating Humidity | |
Certifications | |
Dimensions | - 185 x 100 x 35mm (7.3 x 3.9 x 1.4 in.) per access point
|
Weight | - 268g (0.6 lbs.) per access point
|
Warranty | |
PACKAGE CONTENTS |
- 2 x TEW-840APBO
- Quick Installation Guide
- Proprietary/Passive PoE injectors (24V DC, 0.6A)
- Mounting hardware
|
* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally, environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
Not Available in Europe