6-Port Unmanaged Fast Ethernet Long Range PoE+ Switch

TE-FP051 (Version v2.0R)

  • Easy installation
  • 4 x Fast Ethernet PoE+ ports and 2 x Fast Ethernet ports
  • Enable the DIP switch to extend the PoE+ signal up to 250m (820ft.) at 10Mbps
  • 1.2Gbps switching capacity
  • 60W PoE budget
  • Wall mountable design
  • Sturdy metal switch
  • Use with TRENDnet's PoE splitter to network and power non-PoE devices
  • 3-year warranty

The 6-Port Unmanaged Fast Ethernet Long Range PoE+ Switch, model TE-FP051, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices, such as access points, VoIP phones, and IP cameras. It supports both PoE (802.3af) and PoE+ (802.3at) devices with a 60W PoE budget. This Unmanaged Fast Ethernet Long Range PoE+ Switch works up to 250m (820 ft.) away for longer distance PoE applications. It features a fanless design, and has a convenient option for wall-mounting.

PoE+ Power

A 60W PoE power budget supports up to four Power over Ethernet devices.

Fast Ethernet (10/100Mbps)

Six Fast Ethernet ports provide a 1.2Gbps switching capacity to support edge network installations.

Long Range PoE+ Switch

Extend the PoE+ signal up to 250m (820 ft.) at 10Mbps for long distance PoE installations.

Diagram showing a network setup with a wireless access point, an IP phone, a network switch, and a CPU. The wireless access point is mounted on a wall, emitting wireless signals. The IP phone and CPU are connected to the network switch via cables. The network switch connects to the network cloud.
Front and rear views of the TRENDnet TE-FP051 Ethernet switch. The front panel includes a DIP switch, LED indicators for LINK/ACT and PoE status, four Fast Ethernet PoE+ ports labeled 1 to 4, and two Fast Ethernet ports labeled 5 and 6. The rear panel shows the power input and a grounding point.

PoE+

Supplies up to 30W of PoE+ power per PoE port with a 60W total power budget

Ports

Four Fast Ethernet PoE+ ports and two Fast Ethernet ports

Long Range PoE+

Enable the DIP switch to extend the PoE+ signal up to 250m (820 ft.) at 10Mbps for long distance PoE installations

Switching Capacity

1.2Gbps switching capacity

Housing

Wall mountable metal housing

LED Indicators

LED indicators convey PoE and port status

Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3af
  • IEEE 802.3at
Device Interface
  • 4 x Fast Ethernet PoE+ ports
  • 2 x Fast Ethernet port
  • DIP Switch
  • LED indicators
  • Wall mountable
Data Transfer Rate
  • Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Performance
  • Data RAM Buffer: 448Kbits
  • Switch Fabric: 1Gbps
  • MAC Address Table: 1K entries
  • Jumbo Frame: 15KB
  • Forwarding rate: 0.89Mpps (64-byte packet size)
AC Power
  • Input: 100 – 240V AC, 50/60Hz, 1.5A, internal power supply
  • Max. consumption: 1.5W (no PD)
PoE
  • PoE budget: 60W
  • Mode A: Pins 1, 2, 3, and 6 for power
  • Over current protection
  • Short circuit protection
MTBF
  • > 500,000 hours
Operating Temperature
  • 0° – 40° C (32° – 104° F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 140 x 75 x 28mm (5.5 x 3 x 1.1 in.)
Weight
  • 340g (12 oz.)
Certifications
  • CE
  • FCC
Warranty
  • 3 year

PACKAGE CONTENTS
  • TE-FP051
  • Quick Installation Guide
  • Power Adapter (48V DC, 1.35A)

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.