10-Port Gigabit Web Smart Switch

TEG-082WS (Version v2.5R)

Hardware versions of (v2.xR) can be upgraded with the latest firmware to update your model to the latest hardware version.

8 x Gigabit ports
2 x Gigabit SFP Slots
Easy-to-use web-based management interface
Remote cloud management with TRENDnet Hive (Additional fee applies)
Supports IPv6, LACP, VLAN, QoS, and IGMP/MLD Snooping
IPv4/IPv6 Static Routing support
Bandwidth control per port
Private, Multicast, and Voice VLAN support
20Gbps switching capacity
IEEE 802.1p QoS with queue scheduling support
Fanless design
NDAA / TAA compliant (U.S. and Canada only)

TRENDnet’s Gigabit Web Smart Switch series offers advanced L2+ features with enhanced traffic management controls to meet the evolving demands of SMB networks. This rack mountable IPv6-ready managed switch comes with an intuitive web-based interface. Advanced managed switch features include LACP to increase bandwidth between switches by grouping ports together, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this a powerful solution for any SMB network. Improve voice performance by isolating and prioritizing VoIP traffic from normal data traffic with an easy-to-use voice VLAN feature.

Free up router resources by offloading routing processes to this managed switch by using the L2+ IPv4/IPv6 static routing feature to efficiently route traffic at the switch level. The dynamic ARP inspection feature helps protect connected devices from man-in-the-middle attacks by discarding malicious and invalid ARP packets. Take advantage of the available multicast and IGMP/MLD snooping features to optimize IP surveillance system performance, and minimize network traffic. TRENDnet’s web smart managed switches also feature SFP slots to support long-distance fiber networking applications.

Easily manage and configure TRENDnet’s Web Smart Managed Switch Series remotely by updating switches to the latest firmware for access to TRENDnet Hive. TRENDnet Hive is a network cloud manager that reduces management time and cost. These cloud managed switches require no additional hardware, server, or personal cloud with TRENDnet’s reliable cloud service.

Line art of a Network switch with dashboard management speech bubble.

Web Smart Management

Provides an easy-to-use web-based GUI management for reduced switch configuration complexity and offers a combination of SMB management features for easy deployment.

Diagram showing a network switch connected to various network management protocols. A cloud labeled 'Network' connects to five boxes labeled VLAN, IGMP, QoS, RMON, and SNMP, all of which are linked to a network switch below. The switch features several Ethernet ports, illustrating its capability to manage multiple network functions.

Integration Flexibility

Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration.

Network diagram featuring two multi-port switch with the upper device linked to a lower switch. Three computers are connected to the lower switch.

High-Speed SFP

Offers two dedicated gigabit SFP slots to allow for long distance fiber optic connections.

An office layout diagram showing different VLANs (Virtual Local Area Networks) for various departments, including Technical Support VLAN, Engineering VLAN, and Marketing VLAN. Each department is highlighted in blue to indicate its VLAN. A Web Smart Switch is connected to these VLANs, demonstrating network segmentation and management within the office environment.

Front view of the TRENDnet TEG-S82WS web smart switch. The switch features LED indicators on the left side for power, link/activity, and speed. There are 8 Gigabit ports in the center, numbered 1 to 8, and 2 Gigabit SFP slots on the right, numbered 9 and 10.

Hardware Design

Provides eight gigabit ports, two SFP slots, a 20Gbps switching capacity, a built-in power supply, and rackmount brackets.

IPv6 Ready

This switch supports IPv6 configuration and IPv6 neighbor discovery.

Hive Enabled

Remotely manage, configure, and diagnose this web smart switch via TRENDnet’s cloud service (Additional fee applies)

Traffic Management

A broad range of network configurations are supported by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, RSTP, MSTP, Loopback Detection, GVRP, 802.1p Class of Service (CoS), port bandwidth management, and QoS queue scheduling.

Troubleshooting

A convenient cable diagnostic test and traffic statistics aid in network troubleshooting.

Access Control

Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, and RADIUS are compatible with layered access controls.

Monitoring

RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions.

Standards	IEEE 802.1d IEEE 802.1p IEEE 802.1Q IEEE 802.1s IEEE 802.1w IEEE 802.1X IEEE 802.1ab IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3z IEEE 802.3ab IEEE 802.3ad IEEE 802.3az
Device Interface	8 x Gigabit ports 2 x SFP slots LED indicators
Data Transfer Rate	Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit Ethernet: 2000 Mbps (full duplex)
Performance	Switch fabric: 20 Gbps RAM buffer: 4.1 Mbits MAC Address Table: 8K entries Jumbo Frames: 10 Kbytes HOL Blocking Prevention Forwarding rate: 14.9 Mpps (64-byte packet size)
Management	CLI (Telnet / SSHv2) for basic administration HTTP/HTTPS (SSL v2/3 TLS) Web based GUI SNMP v1, v2c, v3 RMON v1 Static Unicast MAC Address Enable/disable 802.3az Power Saving LLDP and LLDP-MED Virtual Cable Diagnostics Test IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration Dual image and configuration TC Root/Protect
Hive Cloud Management	Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser Multi-device management Provisioning through scheduled batch firmware or configuration updates for multiple switches Event/hardware network monitoring (CPU/memory utilization) Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
MIB	IP Forward Table MIB RFC 1354 RMON MIB RFC 1271 IPv4 MIB RFC 1213 IPv6 MIB RFC 2465 GVRP MIB IEEE 802.1Q-VLAN LA MIB IEEE 802.3ad LLDP MIB IEEE 802.1ab IGMP Snooping MIB RFC 2933 MLD Snooping MIB RFC 3019 Private VLAN MIB IEEE 802.1Q DHCP SNOOP MIB RFC 2026 QoS MIB RFC 4323 SNMP MIB RFC 3415 STP MIB RFC 4318 PNAC MIB IEEE 802.1x VLAN MIB IEEE 802.1q DNS MIB RFC 1611 ACL MIB Bandwidth CTRL MIB LBD MIB Mirror MIB IPv6 NEIGHBOR MIB SNTP MIB Storm CTRL MIB Statistics MIB Tool MIB Voice VLAN MIB DoS MIB
Spanning Tree	IEEE 802.1D STP (Spanning Tree protocol) IEEE 802.1w RSTP (Rapid Spanning Tree protocol) IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
Link Aggregation	Static Link Aggregation 802.3ad Dynamic LACP
Quality of Service (QoS)	802.1p Class of Service (CoS) DSCP (Differentiated Services Code Point) Bandwidth Control per port Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)
VLAN	Multiple management VLAN assignment Asymmetric VLAN 802.1Q Tagged VLAN Dynamic GVRP MAC-based VLAN Protocol-based VLAN Up to 256 VLAN groups, ID Range 1-4094 Private VLAN (Protected Ports) Voice VLAN (10 user defined OUIs)
Multicast	IGMP Snooping v1, v2, v3 MLD Snooping v1, v2 IGMP fast leave MVR (Multicast VLAN Registration) Static Multicast Address Up to 256 multicast entries
Port Mirror	RX, TX, or Both Many to one
Access Control	802.1X Port-Based Network Access Control , RADIUS, TACACS+ Local Dial In User Authentication DHCP Snooping (per VLAN) Loopback Detection Duplicated Address Detection Trusted Host Denial of Service (DoS) IP MAC port binding Dynamic ARP inspection Block unknown multicast
ACL IPv4 L2-L4 & IPv6	MAC Address VLAN ID Ether Type (IPv4 only) IP Protocol 0-255 TCP/UDP Port 1-65535 802.1p DSCP (IPv4 only) IPv6 Address (IPv6 only)
Layer 3 Features	IPv4 / IPv6 static routing IP interfaces: Up to 6 Routing table entries: Up to 32 (IPv4 / IPv6) ARP table (up to 128 entries) Inter-VLAN routing
Compatibility	Optional Software Utility: Windows® 10, 8.1, 8, 7, Vista, XP, Windows® 2003/2008 Server
Special Features	Fanless Design IPv6 802.3az power saving Rack mountable
Power	Input: 100 - 240 V AC, 50/60 Hz, internal power supply Consumption: 7.1 Watts (max.)
Fan/Acoustics	Quantity: 0 Noise Level: 0 dB(A) (max.)
MTBF	1,092,872 hours
Operating Temperature	-5 – 50°C (23 - 122°F)
Operating Humidity	Max. 95% non-condensing
Dimensions	280 x 125.8 x 44 mm (11 x 5 x 1.74 in.) Rack mountable 1U height
Weight	0.98 kg (2.2 lbs.)
Certifications	CE FCC
Warranty	3 year

PACKAGE CONTENTS

TEG-082WS
Quick Installation Guide
CD-ROM (Utility & User's Guide)
Power cord (1.8 m/6 ft.)
Rack mount kit

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in Europe