300Mbps Wireless N-Draft Firewall Router
TEW-631BRP (Version 1.0R)
- 12x the speed and 6x the coverage of wireless g
- Seamlessly stream video, download files, talk Online and play games
- Quality of Service technology prioritizes Internet calls, gaming and video streaming
- Advanced wireless encryption and a firewall provides robust security
DISCONTINUED PRODUCT
The TEW-631BRP (Version 1.0R) has been discontinued. It has been replaced by the TEW-831DR (Version v1.0R). For a list of discontinued products, click here.Firmware
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware Version: 1.0.3.2
Release Date: Aug 2007
Firmware Upgrade Instruction:
1. Download, Unzip and save the Firmware _TEW-631BRP(v1.0.3.2).zip file to your local PC
2. Go to TEW-631BRP's configuration page http://192.168.1.1
3. Go to Tools --> Firmware section
4. Browse to the unzipped file and click on Browse to load the new firmware
5. The upload page will indicate you this process would take about 200 secs, please wait till the page refresh itself.
6. Perform a hardware reset
7. Firmware upgrade successful
Filename: Firmware_TEW-631BRP(v1.0.3.2).zip
SHA-1 Checksum: A9BA7EBBC21367E446EFE3B27E9D31A44717433A
Date: 7/26/2017
File Size: 989.68 KB
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware upgrade failure may permanently damage the unit and causing it not to function. Please check the "Firmware Release Note" on our web site and if the issues in the note do not address the problem you are experiencing, please do not upgrade the firmware. |
Description:
Firmware file:
"TEW-631BRP_upgrade_v1.0.3.1_1020.bin"
Date: Oct 2006.
TEW-631BRP 300Mbps Wireless N-Draft Firewall Router
Firmware version: 1.0.3.1
Firmware Upgrade Instruction:
1. Download, Unzip and save the Firmware _TEW-631BRP(v1.0.3.1).zip file to your local PC
2. Go to TEW-631BRP's configuration page http://192.168.1.1
3. Go to Tools --> Firmware section
4. Browse to the unzipped file and click on Browse to load the new firmware
5. The upload page will indicate you this process would take about 200 secs, please wait till the page refresh itself.
6. Perform a hardware reset
7. Firmware upgrade successful
Filename: Firmware_TEW-631BRP(v1.0.3.1).zip
SHA-1 Checksum: A9CBA882D98E68D174216FDB8476602C3CBF7AC5
Date: 7/26/2017
File Size: 989.32 KB
Datasheet
Filename: EN_Spec_TEW-631BRP.pdf
Date: 1/23/2007
File Size: 701.33 KB
Filename: FR_Spec_TEW-631BRP.pdf
Date: 8/4/2006
File Size: 705.16 KB
Filename: GE_Spec_TEW-631BRP.pdf
Date: 8/4/2006
File Size: 705.56 KB
Filename: SP_Spec_TEW-631BRP.pdf
Date: 8/4/2006
File Size: 704.82 KB
Filename: RU_Spec_TEW-631BRP.pdf
Date: 8/4/2006
File Size: 1.93 MB
Quick Installation Guide
Filename: EN_QIG_TEW-631BRP.pdf
Date: 1/23/2007
File Size: 767.99 KB
Filename: FR_QIG_TEW-631BRP.pdf
Date: 1/23/2007
File Size: 773.24 KB
Filename: GE_QIG_TEW-631BRP.pdf
Date: 1/23/2007
File Size: 772.83 KB
Filename: PO_QIG_TEW-631BRP.pdf
Date: 7/5/2007
File Size: 705.26 KB
Filename: SP_QIG_TEW-631BRP.pdf
Date: 1/23/2007
File Size: 772.23 KB
Filename: RU_QIG_TEW-631BRP.pdf
Date: 1/23/2007
File Size: 1.28 MB
User's Guide
Frequently Asked Questions (FAQ)
Product Images
When using WDS links the TEW-631BRP will fall back to 802.11g mode.
Make sure that you are using Internet Explorer and not an
unsupported browser like Fire Fox.
...
First make sure you have the router physically connected
properly. Connect the DSL modem via Ethernet to the WAN port of the
TEW-631BRP. If you have any computers that need to be hard wired into the
router you will connect them to one of the four LAN ports.
Make sure the connection from...
Well Known Ports
1) Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (blank).
2)Click on "Advanced" on the left hand side then click on "Virtual Server".
3)Click the "En...
Step 1 Log into the router by entering its IP address
into a browser. The default IP address is https://192.168.1.1.
At the login, enter your username (admin) and password (blank).
Step 2 Click "Status" on the left hand side
then click on "Device Information".
...
Step 1 Log into the router by entering its IP address
into a browser. The default IP address is https://192.168.1.1.
At the login, enter your username (admin) and password (blank).
Step 2 Click on "Basic" on the left hand side
then click on "Wireless".
Step 3 Enter in the...
Log into the router by entering its IP address
into a browser. The default IP address is https://192.168.1.1.
At the login, enter your username (admin) and password (blank).
...
Step 1 Log into the router by entering its IP address
into a browser. The default IP address is https://192.168.1.1.
At the login, enter your username (admin) and password (blank).
Step 2 Click "Basic" on the left hand side then
click on "Network Settings".
Step 3 Enter i...
The default IP address is https://192.168.1.1.
The default username is (admin) and the default password is (admin).
...
Step 1 Log into the router by entering its IP address
into a browser. The default IP address is https://192.168.1.1.
At the login, enter your username (admin) and password (blank).
Step 2 Click "Tools" on the left hand side
then click on "Firmware".
Step 3 Click on "Brows...
Step 1 Log into the router by entering its IP address
into a browser. The default IP address is https://192.168.1.1.
At the login, enter your username (admin) and password (blank).
Step 2 Click "Tools" on the left hand side
then click on "System".
...
Press and hold in the reset button on the back of the router
for approximately 15 seconds while the power is on.
...
Step 1 Log into the router by entering its IP address
into a browser. The default IP address is https://192.168.1.1.
The default username is "admin" with a password of (blank).
Step 2 Click "Tools" on the left hand side
then click on "Admin".
Step 3 Input the new password and verify. Then ...
| Hardware | |
| Standards |
|
|---|---|
| WAN | 1 x 10/100Mbps Auto-MDIX Port (Internet) |
| LAN | 4 x 10/100Mbps Auto-MDIX Port |
| Slide Switch | Turn On/Off Wireless LAN |
| Connection Type | Dynamic IP, Static (Fixed) IP, PPPoE, PPTP, L2TP |
| NAT Firewall | 4K ~ 16K Configurable NAT entries; Restricted APT IP Ranges, Port Ranges & Schedule Pre-Defined Game Hosting Configurations Port Triggering for 64 Special Applications ALG Support – RTP/RTSP, AOL, FTP, ICMP, WMP/MMS, NetMeeting, SIP ALG Enable/Disable |
| SPI Firewall | UP to 64 Rules for Rule-Based Firewall Cyber Attack Protection – Verified Against Over 2000 Attacks |
| UPnP | UPnP IGD Compliant |
| DMZ | DMZ Host, 64 Configurable Virtual Servers & Game Servers |
| DNS | Static or WAN assigned DNS Servers |
| Internet Access Control | Policy Based Parental Controls, Time Based Internet Access, Port Range/Service Filtering, Internet Domain Restriction. URL Filtering, 20 User Defined Schedules, 20 MAC Address Filter Entries |
| LED Indicator | Power, LAN1~LAN4, WAN, WLAN |
| Power Adapter | 5VDC, 2.5A External Power Adapter |
| Power Consumption | 6W @ 5VDC |
| Dimension (L x W x H) | 180 x 122 x 30 mm (6.8 x 4.6 x 1.1 inches) |
| Weight | 350g (0.8 lb) |
| Temperature |
|
| Humidity | Max. 90% (Non-Condensing) |
| Emissions | FCC & CE |
| Wireless | |
| Frequency | 2.412 ~ 2.462 GHz (FCC) 2.412 ~ 2.472 GHz (ETSI) |
| Antenna | 2 x 4dBi Fixed Dipole Antenna 1 x 4dBi Detachable Dipole Antenna |
| Media Access Protocol | CSMA/CA with ACK |
| Data Rate |
|
| Security |
|
| Output Power |
|
| Receiving Sensitivity |
|
| Channels | 1~ 11 (US), 1~13 (EU) |
PACKAGE CONTENTS |
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
