ADSL/ADSL2+ Ethernet Modem Router

TDM-E400   (Version 2.0R)

  • Connect to the Internet at broadband speeds and create a wired network, all with one product
  • Works with the latest ADSL standards
  • Built-in firewall protects against Internet attack
  • Control access to your network with MAC Layer and IP Layer filtering
  • DISCONTINUED PRODUCT

    The TDM-E400 (Version 2.0R) has been discontinued. For a list of discontinued products, click here.

    Firmware

    Firmware Version: 8824A_2.5.060823w
    Release Date: April, 2008
    Note: Increase IP sessions and fix PPP LED issue
    Filename: FW_TDM-400(8824A_2.5.060823w).zip
    SHA-1 Checksum: A2A71BDD58D4E0582ED03BFA1F042D0D1736AE5A
    Date: 7/28/2017
    File Size: 1.56 MB

    Datasheet

    Filename: EN_Spec_TDM-E400.pdf
    Date: 5/7/2008
    File Size: 574.88 KB

    Quick Installation Guide

    Filename: EN_QIG_TDM-E400_C400.pdf
    Date: 11/17/2006
    File Size: 1.09 MB
    Filename: FR_QIG_TDM-E400_C400.pdf
    Date: 11/17/2006
    File Size: 1.08 MB
    Filename: GE_QIG_TDM-E400_C400.pdf
    Date: 11/17/2006
    File Size: 1.09 MB
    Filename: SP_QIG_TDM-E400_C400.pdf
    Date: 11/17/2006
    File Size: 1.09 MB
    Filename: RU_QIG_TDM-E400_C400.pdf
    Date: 11/17/2006
    File Size: 1.38 MB
    Filename: POL_QIG_TDM-E400_C400.pdf
    Date: 7/21/2007
    File Size: 928.55 KB

    User's Guide

    Filename: UG_TDM-E400_C400.pdf
    Date: 11/17/2006
    File Size: 2.18 MB

    Product Images

    JPEG Image
    File Size: : 372.29 KB
    Date: : 11/17/2006
    JPEG Image
    File Size: : 315.97 KB
    Date: : 11/17/2006
    JPEG Image
    File Size: : 235.90 KB
    Date: : 11/17/2006
    JPEG Image
    File Size: : 2.14 MB
    Date: : 11/17/2006
    TIFF Image
    File Size: : 2.10 MB
    Date: : 11/17/2006
    TIFF Image
    File Size: : 1.74 MB
    Date: : 11/17/2006
    ROHS compliant WEEE crossed-out bin symbol.
    Hardware
    LAN Interface
    • One 10/100 Base-TX Ethernet port, IEEE 802.3/3u, RJ-45 connector
    WAN Interface (ADSL line)
    • One pair (2-wire) loop, 100 Ω line impedance with RJ-11 connector
    • Compliance: ITU-T G.992.1, G.992.2 and ANSI T1.413 Issue 2 (Annex A)
    • Compliance: ITU-T G.992.1, G.992.2, G.992.3, G.992.5 & ANSI T1.413 Issue 2
    Indicators
    • ALM (red LED) – Indicates data error or operation fault
    • LAN (green LED) – Continuous ON when Ethernet is active; blinking while transmitting / receiving data
    • PPP (green LED) – Continuous ON when PPP connection is established; blinking while transmitting / receiving data
    • WAN (green LED) – Continuous ON when ADSL link is up
    • PWR (green LED) – Continuous ON when power is properly connected
    OAM&P
    • Local: Telnet or Web management via Ethernet
    • Remote: Telnet or Web Management
    Power
    • AC adapter: Input 110/220VAC, 50/60Hz; Output 15VAC 1A
    • Power consumption: Less than 6 Watts
    Operating Temperature
    • Operation Temperature and Humidity: 0°C ~ 45°C,5% ~ 95% (non-condensing)
    • Storage Temperature and Humidity: -20°C ~ 85°C, 5% ~ 95% (non-condensing)
    Dimensions
    • 170 mm ×121 mm× 36 mm (6.7 x 4.8 x 1.4 in)
    Weight
    • 255g (9 oz)
    Certifications
    • FCC, CE
    Software
    ATM
    • ATM cells over ADSL, AAL5
    • Supports 8 PVCs
    • Supports UBR, CBR, rt-VBR, nrt-VBR and GFR traffic classes
    • ADSL-aware CAC (Connection Admission Control)
    • Support for F5 AIS, RDI, and loopback cells
    • Payload encapsulation
    • RFC2684 / RFC1483, Multiprotocol Encapsulation over ATM Adaptation Layer 5
    • RFC2225 / RFC1577, Classical IP and ARP over ATM (IPoA)
    • RFC2364, PPP over AAL5 (PPPoA)
    Bridging
    • RFC2684 / RFC1483 bridged PDU encapsulation
    • IEEE 802.1D transparent bridging and spanning tree protocol
    • ZIPB (Zero Installation PPP Bridge)
    Routing
    • RFC2684 / RFC1483 routed PDU encapsulation
    • Supports Point-to-Point Protocol (including PPPoA and PPPoE) and user authentication via PAP or CHAP
    • Supports TCP, UDP, ARP, RARP, IPCP, ICMP, IGMP, etc.
    • IP routing: static route, RIP v1 and v2
    • NAT/PAT with extensive ALG supports
    • DNS relay agent
    • Layer 2 tunneling protocol (L2TP)
    Security
    • Built-in firewall with protection against DOS attacks, IP spoofing, and other common types of attacks
    • Packet filtering at MAC layer (raw filter) and IP layer, including stateful packet filtering
    • Supports blacklist
    Configuration and Network Management
    • TR037-compliant auto-configuration using ILMI
    • SNMP v1 agent – over IP, ILMI VCC or HDLC/EOC
    • DHCP client, server and relay for IP management
    • Universal Plug and Play (UPnP) support
    • Telnet with CLI (command line interface) or Web-based configuration and management
    • FTP/TFTP or HTTP for firmware upgrade and configuration

    PACKAGE CONTENTS

    • TDM-E400
    • CD-ROM (User's Guide)
    • Quick Installation Guide
    • 1 x 1.5m(5ft) Cat.5 Cable
    • 1 x RJ11 Telephone Cable
    • Power Adapter
      (15V AC 1A)

    All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.