10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch 24 – 57V

TI-PG102i-M   (Version v1.0R)

  • 8 x Gigabit PoE+ ports
  • 2 x SFP slots
  • Supports 100/1000Base-FX fiber SFP modules
  • PoE power budget: 240W@48VDC or 124W@24VDC
  • PoE alive check restarts unresponsive PoE powered devices
  • 20Gbps switching capacity
  • Hardened IP30 rated metal housing
  • Includes DIN-rail mounting bracket
  • Operating temperature range of -10° – 75° C (14° – 167° F)
  • Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
  • IEEE 802.1p QoS with queue scheduling support
  • Bandwidth control per port
  • Dual redundant power inputs with overload current protection
  • Alarm output triggered by power failure
  • Power supply sold separately (models: TI-S24048, TI-S48048, TI-S12024)
  • NDAA / TAA compliant
NDAA/TAA Compliant

DISCONTINUED PRODUCT

The TI-PG102i-M (Version v1.0R) has been discontinued. For a list of discontinued products, click here.

Firmware

Firmware
DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only

Model:TI-PG102i-M
Hardware Version: v1.xR
------------------------------------------

Firmware Version:V1.0.13.S0
Release Date: 6/2022
Release Note:

  • -Fixed stack buffer overflow security issue with Telnet/SSH CLI user login
  • -Fixed stack buffer overflow security issue with Telnet/SSH CLI interface

Filename: FW_TI-PG102i-M_v1(1.0.13.S0).zip
SHA-1 Checksum: 7265A6EDAEB59775348BB0056900B1280278E899
Date: 6/2/2022
File Size: 6.91 MB
Download

Other

MIB
Model: TI-PG102i-M
Hardware Version: v1.0R

MIB Version: 1.00
Release Date: 3/2022
Note:
  • -Initial Release

Filename: MIB_TI-PG102i-M_v1(1.00).zip
Date: 3/1/2022
File Size: 5.71 KB
Download

Datasheet

Data Sheets (English)
Filename: EN_datasheet_TI-PG102i-M_(v1.0R).pdf
Date: 4/11/2022
File Size: 904.22 KB
Download Email
Data Sheets (Français)
Filename: FR_datasheet_TI-PG102i-M_(v1.0R).pdf
Date: 4/11/2022
File Size: 1.03 MB
Download Email
Data Sheets (Deutsch)
Filename: GE_datasheet_TI-PG102i-M_(v1.0R).pdf
Date: 4/11/2022
File Size: 1.01 MB
Download Email
Data Sheets (Português)
Filename: PO_datasheet_TI-PG102i-M_(v1.0R).pdf
Date: 4/11/2022
File Size: 1.02 MB
Download Email
Data Sheets (Español)
Filename: SP_datasheet_TI-PG102i-M_(v1.0R).pdf
Date: 4/11/2022
File Size: 1.02 MB
Download Email
Data Sheet (Pусский)
Filename: RU_datasheet_TI-PG102i-M_(v1.0R).pdf
Date: 4/11/2022
File Size: 1.43 MB
Download Email
Data Sheets (Italiano)
Filename: IT_datasheet_TI-PG102i-M_(v1.0R).pdf
Date: 4/11/2022
File Size: 1.04 MB
Download Email

Quick Installation Guide

Quick Installation Guide (English)
Filename: English_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.
Date: 9/15/2021
File Size: 4.85 MB
Download
Quick Installation Guide (Français)
Filename: French_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.p
Date: 9/15/2021
File Size: 3.90 MB
Download
Quick Installation Guide (Deutsch)
Filename: German_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.p
Date: 9/15/2021
File Size: 2.85 MB
Download
Quick Installation Guide (Português)
Filename: Portuguese_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG6
Date: 9/15/2021
File Size: 2.95 MB
Download
Quick Installation Guide (Español)
Filename: Spanish_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.
Date: 9/15/2021
File Size: 2.94 MB
Download
Quick Installation Guide (Pусский)
Filename: Russian_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.
Date: 9/15/2021
File Size: 2.88 MB
Download
Quick Installation Guide (Italiano)
Filename: Italian_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.
Date: 9/15/2021
File Size: 2.91 MB
Download

User's Guide

User's Guide
Filename: Industrial_Managed_UG_012924.pdf
Date: 11/5/2021
File Size: 6.12 MB
Download

Product Images

PNG Image
File Size: : 8.38 MB
Date: : 11/2/2021
Download
PNG Image
File Size: : 3.94 MB
Date: : 11/2/2021
Download
PNG Image
File Size: : 6.86 MB
Date: : 11/2/2021
Download
PNG Image
File Size: : 5.18 MB
Date: : 11/2/2021
Download
PNG Image
File Size: : 8.91 MB
Date: : 11/2/2021
Download
ROHS compliant WEEE crossed-out bin symbol.
Standards
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab
  • IEEE 802.1ax
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3z
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3az
  • IEEE 802.3af
  • IEEE 802.3at
Device Interface
  • 8 x Gigabit PoE+ ports
  • 2 x 100/1000Mbps SFP slots
  • 6-pin removable terminal block (primary/RPS power inputs & alarm relay output)
  • DIP switches
  • LED indicators
  • Reset button
Data Transfer Rate
  • Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit Ethernet: 2000Mbps (full duplex)
Performance
  • Switch fabric: 20Gbps
  • RAM buffer: 128MB
  • MAC address table: 8K entries
  • Jumbo frames: 10KB
  • Forwarding mode: store and forward
  • Forwarding rate: 14.88Mpps (64-byte packet size)
Management
  • HTTP web-based GUI
  • CLI: Telnet / SSHv2
  • SNMP v1, v2c, v3
  • SNMP trap (up to 5 receivers)
  • RMON groups 1/2/3/9
  • Device configuration backup & restore, upgrade firmware, reboot, and reset to default
  • Multiple administrative or read-only user accounts
  • Enable or disable power saving mode per port
  • Static MAC entries
  • LLDP (Link layer discovery protocol)
  • Netlite device map
  • ONVIF device discovery
  • SNTP
  • SMTP alert
  • Syslog
  • Port statistics/utilization
  • Traffic monitor
  • Port mirror: one to one, many to one
  • Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
  • Loopback detection
  • DHCP relay/option 82
  • ERPS (Ethernet Ring Protection Switching) G8032v2
  • SFP DDMI (Digital Diagnostic Monitoring Interface)
MIB
  • MIB II RFC 1213
  • Bridge MIB RFC 1493
  • RMON (Group 1,2,3,9) RFC 2819 RFC 1757
Spanning Tree
  • IEEE 802.1d STP (spanning tree protocol)
  • IEEE 802.1w RSTP (rapid spanning tree protocol)
  • BPDU filter, guard, and root guard
Link Aggregation
  • Static link aggregation and 802.3ad dynamic LACP (Up to 3 groups)
Quality of Service (QoS)
  • 802.1p Class of service (CoS)
  • DSCP (Differentiated Services Code Point)
  • Bandwidth control per port
  • Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
VLAN
  • 802.1Q tagged VLAN
  • MAC-based VLAN
  • Port isolation
  • Up to 256 VLAN groups, ID range 1-4094
Multicast
  • IGMP snooping v1, v2, v3
  • IGMP querier
  • IGMP fast leave
  • Up to 256 multicast groups
  • Static multicast entries
Access Control
  • 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
  • DHCP snooping/screening
  • Trusted host/IP access list for management access
  • Port Security/MAC address learning restriction (Up to 100 entries per port)
  • Static/dynamic ARP inspection
ACL
  • Source/Destination MAC address
  • Source/Destination IP address
  • Source Interface
  • VLAN ID
  • EtherType
  • TCP/UDP port 1-65535
Special Features
  • Netlite device discovery and map display in GUI
  • Port security: MAC address learning restriction per port
  • DHCP relay/option 82 & DHCP server snooping/screening support
  • Wide operating temperature range
  • Dual redundant power inputs
  • Alarm relay triggered by power failure
  • Surge and ESD protection
Power
  • PWR (Primary) terminal input: 24 – 57V DC
  • RPS (Redundant) terminal input: 24 – 57V DC
  • Compatible power supply: TI-S12024 (120W), TI-S24048 (240W), TI-S48048 (480W) sold separately
  • Max. Consumption: 13W (no PoE load), 253W (full PoE load)
PoE
  • PoE budget: 240W@48V DC input, 124W@24V DC input
  • 802.3at: Up to 30W per port
  • PoE Mode A: Pins 1, 2, 3, and 6 for power
  • PoE auto classification
  • PoE port priority/power scheduling/PD alive check
  • Over current/short circuit protection
Terminal Block
  • Redundant power inputs, alarm relay contact, 6 pin
  • Wire range: 0.5 mm^2 to 2.5 mm^2
  • Solid wire (AWG): 12-26
  • Stranded wire (AWG): 12-26
  • Wire strip length: 10-11mm
Dip Switch
Pin123456789
RS-232DCDRxDTxDDTRGNDDSRRTSCTS-
RS-422TxD+ (A)TxD- (B)RxD- (B)RxD+ (A)GND----
RS-485--Data- (B)Data- (A)GND----
Alarm Relay Output
  • Relay output with current carrying capacity of 1A, 24V DC
  • Short circuit mode when one power source is connected
  • Open circuit mode when two power sources are connected
Enclosure
  • IP30 rated metal enclosure
  • Fanless passive cooling
  • DIN-Rail mount
  • Grounding point
  • ESD (Ethernet) Protection: 8KV DC
  • Surge (Power) Protection: 6KV DC
MTBF
  • 562,234 hours @ 25° C
  • 142,948 hours @ 75° C
Operating Temperature
  • -10° – 75° C (14° – 167° F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
Weight
  • 930g (2.05 lbs.)
Certifications
  • CE
  • FCC
  • Shock (IEC 60068-2-27)
  • Freefall (IEC 60068-2-32)
  • Vibration (IEC 60068-2-6)
Warranty
  • 3 year

PACKAGE CONTENTS
  • TI-PG102i-M
  • Quick Installation Guide
  • Removable terminal block
  • DIN rail mounting bracket

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.