Release Notes
Version: 2.0.5
OS Compatibility: Windows 10/11 64-bit
Important Note: Please uninstall any previous versions of the TRENDnet AP and TRENDnet Management software utilities before installing this software utility. - Added compatibility for both specific Hive cloud supported access point and web smart switches devices
- Added batch multi-device Hive cloud registration feature
Filename: TRENDnet_Management_Utility(2.0.5).zip
SHA-1 Checksum: 3C8C4215DF5C530F5A27F0FF774BB2526E8D7860
Date: 3/18/2024
File Size: 69.05 MB
Firmware Version: v3.01.027
Release Date: 3/2024
Note:
Filename: TPE-5028WS_FW_3.01.027.zip
SHA-1 Checksum: 1DDF149BB267DA0BE3D0088F0E7D7EB863191D8E
Date: 3/6/2024
File Size: 12.35 MB
Firmware Version: v3.01.025
Release Date: 07/2023
Note:
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first, then firmware version 2.10.024 afterwards. (Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *
Fixes
- Fixed PoE Utilization table
Filename: FW_TPE-5028WS_fw_3.01.025.zip
SHA-1 Checksum: 51E37C968FEE70455CCBBB92B421D72FF661CBFA
Date: 7/21/2023
File Size: 12.34 MB
Firmware Version: v3.01.012
Release Date: 08/2021
Note:
* This download includes Firmware version 3.0.012, Firmware version 2.10.024 and Firmware version 1.10.026.
** If your firmware version is between firmware version 1.00.xx 1.00.023, please install firmware version 1.10.026 before upgrading to firmware version 2.10.024.
***If your firmware version is between firmware version 2.0.xx to 2.10.011, please install firmware version 2.10.024 first before upgrading to firmware version 3.01.012
If it is the first time upgrading the switch from 1.00.010 to 2.10.010 or above, it is recommended to manually reset the device to factory default and clear web browser cache after the loading firmware file.
- New GUI
- Add Ping Watchdog feature
- Adds Cloud enabled feature (TRENDnet Hive)
- Adds capability to backup, copy, restore config functions on Hive
- Adds capability to configure additional QoS functions
- Sync time settings from Hive
- Bug Fixes
Filename: TPE-5028WS_FW_3-01-012.zip
SHA-1 Checksum: D1226F581C0F66C31CB18FA2220A5D9E6B02BA20
Date: 5/5/2022
File Size: 33.14 MB
Version: 3.00.002
Release Date: 3/2022
Note: - Added auto firmware upgrade feature
Filename: MIB_TPE-5028WS_v1(3.00.002).zip
Date: 3/10/2022
File Size: 115.66 KB
Filename: EN_datasheet_TPE-5028WS_(v1.5R).pdf
Date: 9/15/2021
File Size: 461.39 KB
Filename: FR_datasheet_TPE-5028WS_(v1.5R).pdf
Date: 8/10/2021
File Size: 407.73 KB
Filename: GE_datasheet_TPE-5028WS_(v1.5R).pdf
Date: 8/10/2021
File Size: 420.97 KB
Filename: PO_datasheet_TPE-5028WS_(v1.5R).pdf
Date: 8/10/2021
File Size: 419.45 KB
Filename: SP_datasheet_TPE-5028WS_(v1.5R).pdf
Date: 8/10/2021
File Size: 413.78 KB
Filename: IT_datasheet_TPE-5028WS_(v1.5R).pdf
Date: 8/10/2021
File Size: 430.66 KB
Filename: EN_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Date: 8/18/2022
File Size: 5.42 MB
Filename: FR_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Date: 8/18/2022
File Size: 4.54 MB
Filename: GE_PoE_Web_Smart_Switch_Series_v2.0R_081722.pdf
Date: 8/18/2022
File Size: 4.45 MB
Filename: PT_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Date: 8/18/2022
File Size: 3.46 MB
Filename: SP_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Date: 8/18/2022
File Size: 3.43 MB
Filename: RU_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Date: 8/18/2022
File Size: 3.36 MB
Filename: ITA_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Date: 8/18/2022
File Size: 3.38 MB
Filename: TRENDnet_Hive_User_Guide_08172021.pdf
Date: 10/6/2021
File Size: 2.45 MB
Filename: PoE_Web_Smart_Switch_Series_Users_Guide_11122020.pdf
Date: 1/11/2021
File Size: 4.69 MB
PNG Image
File Size: : 1.25 MB
Date: : 9/17/2021
PNG Image
File Size: : 912.32 KB
Date: : 9/17/2021
PNG Image
File Size: : 942.41 KB
Date: : 9/17/2021
You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section.
...
Only managed or web smart PoE Switches will have reset instruction. Unmanaged PoE Switches are not configurable and do not have settings to reset. Your Switch will have a reset button. This button is typically recessed and located on the front or the back of the Switch. You will need a small pin or ...
A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website. The TPE-5028WS power budget is 370W....
The TPE-5028WS supports IEEE 802.3af and 802.3at PoE standards. TRENDnet PoE Switches typically support IEEE industry standards. Please check detailed product specifications under the Product section of our website. If your device is not IEEE PoE compliant it may not be compatible with TRENDnet PoE ...
Standards | - IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3af
- IEEE 802.3at
- IEEE 802.3az
|
---|
Device Interface | - 24 x Gigabit PoE+ ports
- 4 x Shared Gigabit ports (RJ-45/SFP)
- LED indicators
|
---|
Data Transfer Rate | - Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit Ethernet: 2000Mbps (full duplex)
|
---|
Performance | - Switch fabric: 56Gbps
- RAM buffer: 4.1Mbits
- MAC Address Table: 8K entries
- Jumbo Frames: 10Kbytes
- HOL Blocking Prevention
- Forwarding rate: 41.7Mpps (64-byte packet size)
|
---|
Management | - HTTP/HTTPS (SSL v2/3 TLS) Web based GUI
- SNMP v1, v2c, v3
- RMON v1
- Static Unicast MAC Address
- Enable/disable 802.3az Power Saving
- LLDP and LLDP-MED
- Virtual Cable Diagnostics Test
- IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration
|
---|
Hive Cloud Management | - Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser
- Multi-device management
- Provisioning through scheduled batch firmware or configuration updates for multiple switches
- Event/hardware network monitoring (CPU/memory utilization)
- Enable & disable PoE, set PD (powered device) alive check, configure PoE scheduling, and monitor PoE budget utilization (for PoE switches only)
- Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
|
---|
MIB | - IP FORWARD TABLE MIB RFC 1354
- RMON MIB RFC 1271
- IPV4 MIB RFC 1213
- IPV6 MIB RFC 2465
- GVRP MIB IEEE 802.1Q-VLAN
- LA MIB IEEE 802.3ad
- LLDP MIB IEEE 802.1AB
- IGMP SNOOPING MIB RFC 2933
- MLD SNOOPING MIB RFC 3019
- PRIVATE VLAN MIB IEEE 802.1Q
- DHCPSNOOP MIB RFC 2026
- QOS MIB RFC 4323
- SNMP MIB RFC 3415
- STP MIB RFC 4318
- PNAC MIB IEEE 802.1x
- VLAN MIB IEEE 802.1q
- DNS MIB RFC 1611
- ACL MIB
- BANDWIDTH CTRL MIB
- LBD MIB
- MIRROR MIB
- IPV6 NEIGHBOR MIB
- SNTP MIB
- STORM CTRL MIB
- STATISTICS MIB
- Tool MIB
- VOICE VLAN MIB
- DOS MIB
|
---|
Spanning Tree | - IEEE 802.1D STP (Spanning Tree protocol)
- IEEE 802.1w RSTP (Rapid Spanning Tree protocol)
- IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
|
---|
Link Aggregation | - Static Link Aggregation
- 802.3ad Dynamic LACP
|
---|
Quality of Service (QoS) | - 802.1p Class of Service (CoS)
- DSCP (Differentiated Services Code Point)
- Bandwidth Control per port
- Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)
|
---|
VLAN | - Multiple management VLAN assignment
- Asymmetric VLAN
- 802.1Q Tagged VLAN
- Dynamic GVRP
- Up to 256 VLAN groups, ID Range 1-4094
- Private VLAN (Protected Ports)
- Voice VLAN (10 user defined OUIs)
|
---|
Multicast | - IGMP Snooping v1, v2, v3 (per VLAN)
- Static Multicast Address
- Up to 256 multicast entries
|
---|
Port Mirror | - RX, TX, or Both
- One to one
|
---|
Encryption | - 802.1X Port-Based Network Access Control , RADIUS, TACACS+
- Local Dial In User Authentication
- DHCP Snooping (per VLAN)
- Loopback Detection
- Duplicated Address Detection
- Trusted Host
- Denial of Service (DoS)
|
---|
ACL IPv4 L2-L4 & IPv6 | - MAC Address
- VLAN ID
- Ether Type (IPv4 only)
- IP Protocol 0-255
- TCP/UDP Port 1-65535
- 802.1p
- DSCP (IPv4 only)
- IPv6 Address (IPv6 only)
|
---|
Compatibility | - Optional Software Utility: Windows® 10, 8.1, 8, 7, Vista, XP, Windows® 2003/2008 Server
|
---|
Special Features | - PoE+
- IPv6
- 802.3az power saving
- Rack mountable
- PoE scheduling
|
---|
Power | - Input: 100 – 240V AC, 50/60Hz, internal power supply
- Max. consumption: 446W
|
---|
PoE | - Power Budget: 370W
- 802.3at: Up to 30W per port
- PoE Mode A: Pins 1, 2, 3, and 6 for power
- PoE auto/manual classification
- PoE port priority/power scheduling
- PD alive check
|
---|
Fan/Acoustics | - Quantity: 2
- Noise Level: 52 dBA (max.)
|
---|
MTBF | |
---|
Operating Temperature | |
---|
Operating Humidity | |
---|
Dimensions | - 440 x 250 x 44mm (17.3 x 9.8 x 1.74 in.)
- Rack mountable 1U height
|
---|
Weight | |
---|
Certifications | |
---|
Warranty | |
---|
PACKAGE CONTENTS |
- TPE-5028WS
- Quick Installation Guide
- CD-ROM (Utility & User's Guide)
- Power cord (1.8m/6 ft.)
- Rack mount kit
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.