54Mbps 802.11g Wireless Firewall Router
TEW-432BRP (Version B1.xR)
- Proven wireless g performance and reliability
- Stream videos, download files and play games
- Create a network in minutes with Easy-Go installation
- Advanced firewall and wireless encryption ensures data security
DISCONTINUED PRODUCT
The TEW-432BRP (Version B1.xR) has been discontinued. It has been replaced by the TEW-831DR (Version v1.0R). For a list of discontinued products, click here.Utility
Filename: TEW-432BRP_EASY_GO.zip
SHA-1 Checksum: 97D85B181DD8D4CE21EE7FD4C1D614F5C055B3E6
Date: 3/29/2021
File Size: 36.26 MB
Firmware
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Upload Procedures:
- Download the firmware file, unzip and save it to your local disk
- Go to TEW-432BRP’s web browser configuration page firmware upload section
- Select the downloaded file to upgrade
Note:
For Hardware B1/B1.1R unit, please update to firmware version 1.2.0.0015 first then update to firmware version 1.2.0.0019.
For Hardware B2.0R/B2.1R unit, firmware 1.2.0.0019 can be downloaded and upgraded directly.
Filename: Firmware_TEW-432BRP(1.2.0.0019).zip
SHA-1 Checksum: 30FC04D419D9ACC6ACBD6332367E1DFC96632AD9
Date: 7/26/2017
File Size: 611.97 KB
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Upload Procedures:
- Download the firmware file, unzip and save it to your local disk
- Go to TEW-432BRP’s web browser configuration page firmware upload section
- Select the downloaded file to upgrade
Filename: Firmware_TEW-432BRP(1.2.0.0015).zip
SHA-1 Checksum: 2CD5089B99555671940A59A840ADB481771CF422
Date: 7/26/2017
File Size: 600.74 KB
Datasheet
Filename: EN_Spec_TEW-432BRP(bx).pdf
Date: 1/25/2007
File Size: 468.02 KB
Filename: FR_Spec_TEW-432BRP(bx).pdf
Date: 1/25/2007
File Size: 435.83 KB
Filename: GE_Spec_TEW-432BRP(bx).pdf
Date: 1/25/2007
File Size: 435.17 KB
Filename: SP_Spec_TEW-432BRP(bx).pdf
Date: 1/25/2007
File Size: 435.19 KB
Filename: RU_Spec_TEW-432BRP(bx).pdf
Date: 1/25/2007
File Size: 1.45 MB
Quick Installation Guide
Filename: EN_QIG_TEW-432BRP_Bx.pdf
Date: 1/20/2007
File Size: 505.90 KB
Filename: FR_QIG_TEW-432BRP_Bx.pdf
Date: 1/20/2007
File Size: 508.70 KB
Filename: GE_QIG_TEW-432BRP_Bx.pdf
Date: 1/20/2007
File Size: 507.51 KB
Filename: PO_QIG_TEW-432BRP.pdf
Date: 1/20/2007
File Size: 321.78 KB
Filename: SP_QIG_TEW-432BRP_Bx.
Date: 1/20/2007
File Size: 508.65 KB
Filename: RU_QIG_TEW-432BRP_Bx.pdf
Date: 1/20/2007
File Size: 566.09 KB
Filename: EST_QIG_TEW-432BRP.pdf
Date: 1/20/2007
File Size: 318.47 KB
Filename: POL_QIG_TEW-432BRP.pdf
Date: 7/24/2007
File Size: 401.59 KB
Filename: RO_QIG_TEW-432BRP_Bx.pdf
Date: 1/20/2007
File Size: 501.51 KB
Filename: CN_QIG_TEW-432BRP.pdf
Date: 5/16/2013
File Size: 925.06 KB
User's Guide
Frequently Asked Questions (FAQ)
Product Images
Step 1 The TEW-432BRP is connected behind a modem router or another router. To verify this, log onto the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin. They are case sensitive. Step 2 Click...
The EasyGo setup will only work on a Windows PC. If you want to setup the router from a non-Windows PC, follow the steps below.
Step 1 Connect an Ethernet cable from your modem to the WAN port on the router.
Step 2 Connect a second Ethernet cable from your computer to one of the 4
LAN port...
Step 1 Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. In an indoor environment try to position the wireless devices so that the signal pass...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin.
Step 2 Click on "Main" on the left hand side then click on "LAN&DHCP Server".
Step 3 Click on "Disable" on the "D...
Make sure that you are using Internet Explorer and not an unsupported browser like Fire Fox. You can also clear the cache in your browser to ensure you are not looking at a cached image of the web page....
First make sure you have the router physically connected properly. Connect the DSL modem via Ethernet to the WAN port of the TEW-432BRP. If you have any computers that need to be hard wired into the router you will connect them to one of the four LAN ports.
Make sure the connection from the modem...
For Well Known Ports
Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).
Click on "Cancel" if the Setup Wizard comes up.
Click on "Access" on the left hand side.
...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).Step 2 Click on "Wireless" on the left hand side then click on "Security" below wireless. Next select "Security" from t...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin)....
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).
Step 2 Click on "Main" on the left hand side then click on "LAN&DHCP Server".
Step 3 Enter in the new va...
> Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Notes" do
not address the problem you are experiencing with the router, please do not upgrade
the firmware. Do not perform the upgrade if the router's firmware is newer than
th...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin.
Step 2 Click "Tools" on the left hand side then click on "Settings".
...
Press and hold in the reset button on the back of the router for approximately 15 seconds while the power is on....
Step 1 Log into the router by entering it's IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin).
Step 2 Click "Status" on the left hand side then click on "Device Information".
...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin).
Step 2 Click on "Wireless" on the left hand side then click on "WEP".
Step 3 Enter in the desired encryption...
The default IP address is https://192.168.1.1. The default username is (admin) and the default password is (admin)....
First make sure you have the router physically connected properly. Connect the
DSL modem via Ethernet to the WAN port of the TEW-432BRP. If you have any computers
that need to be hard wired into the router you will connect them to one of the
four LAN ports.
Make sure the connection from the...
| Hardware | |
| Standards |
|
| WAN |
|
| LAN |
|
| Connection Type |
|
| Supported Network Protocols |
|
| LED Indicators |
|
| Dimension (L x W x H) |
|
| Weight |
|
| Temperature |
|
| Humidity |
|
| Power Adapter |
|
| Certification |
|
| Wireless | |
| Frequency |
|
| Module Technique |
|
| Antenna |
|
| Media Access Protocol |
|
| Security |
|
| Transmit Power |
|
| Data Rate |
|
| Receiving Sensitivity |
|
| Channels |
|
PACKAGE CONTENTS |
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
