14dBi High Power Wireless Outdoor PoE Access Point
TEW-455APBO (Version v2.xR)
- Supports Access Point, Wireless Distribution System (WDS), and Customer Premises Equipment (CPE) modes
- Add additional high-gain antennas for extended range projects
- Rugged aluminum housing and built-in antenna for extreme weather conditions
- Device powered by an Ethernet cable with Power over Ethernet (PoE) technology
DISCONTINUED PRODUCT
The TEW-455APBO (Version v2.xR) has been discontinued. It has been replaced by the TEW-740APBO2K (Version v3.0R). For a list of discontinued products, click here.Firmware
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
For FCC use
Firmware Version: 2.1.5
Release Date 08/2013
Note:
- Resolve VLAN ID saving issue.
Important Note (Please Read First): If you are currently upgrading your device from a firmware version older than version 2.1.3, DO NOT use Internet Explorer(IE) version 8 or 9 web browsers to upgrade this firmware. Web browser compatiblity issues were found in firmware versions older than version 2.1.3 when upgrading to version 2.1.1 or above. Please use an older version of Internet Explorer (i.e. IE7) or use Firefox (i.e. Firefox 7) when upgrading to firmware version 2.1.3. While performing the update, if you receive a “Checking free memory…” notification, please allow the firmware upgrade process to proceed. Do not disconnect the unit or close the web browser for 6 minutes. The LED’s will cycle after the firmware update has completed.
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
For CE use
Firmware Version: 2.1.5
Release Date 08/2013
Note:
- Resolve VLAN ID saving issue.
Important Note (Please Read First): If you are currently upgrading your device from a firmware version older than version 2.1.3, DO NOT use Internet Explorer(IE) version 8 or 9 web browsers to upgrade this firmware. Web browser compatiblity issues were found in firmware versions older than version 2.1.3 when upgrading to version 2.1.1 or above. Please use an older version of Internet Explorer (i.e. IE7) or use Firefox (i.e. Firefox 7) when upgrading to firmware version 2.1.3. While performing the update, if you receive a “Checking free memory…” notification, please allow the firmware upgrade process to proceed. Do not disconnect the unit or close the web browser for 6 minutes. The LED’s will cycle after the firmware update has completed.
Datasheet
Quick Installation Guide
User's Guide
Product Images
Hardware | |
Standards |
|
---|---|
LED Indicator |
|
Antenna |
|
PoE |
|
EXT (external antenna connector) |
|
Dimension (L x W x H) |
|
Weight |
|
Power Consumption |
|
Management |
|
Wind Speed Support |
|
Waterproof |
|
Temperature |
|
Humidity |
|
Overload Current Protection |
|
Power |
|
Certifications |
|
Wireless | |
Frequency |
|
Modulation Technique |
|
Data Rate (auto-fallback) |
|
Security |
|
Output Power |
|
Receiving Sensitivity |
|
Channels |
|
PACKAGE CONTENTS |
|