12dBi N300 Wireless 5GHz Outdoor PoE Access Point

TEW-676APBO   (Version v1.0R)

  • High speed wireless n building-to-building connections
  • Supports Access Point, Router Access Point, Wireless Distribution System (WDS), Customer Premises Equipment (CPE), and Repeater modes
  • IP-66/67 rated aluminum housing
  • Powered by Power over Ethernet (PoE) technology

DISCONTINUED PRODUCT

The TEW-676APBO (Version v1.0R) has been discontinued. It has been replaced by the TEW-840APBO (Version v1.0R). For a list of discontinued products, click here.

Firmware

DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only

Firmware Version: 1.02
Release Date: 03/2012
Note: Initial Release


Note:
*Never upgrade firmware via a wireless connection
**After successfully upgraded the firmware, please reset the unit to factory default
***Please refer to the Firmware Upgrade Procedure.pdf in .zip file for instruct


Filename: TEW-676APBOv1(FW1.02).zip
SHA-1 Checksum: 8199207C982B639690D54200703A9B8959867E21
Date: 7/25/2017
File Size: 3.56 MB

Datasheet

Filename: EN_spec_TEW-676APBO(v1.0R).pdf
Date: 8/29/2012
File Size: 518.52 KB
Filename: FR_spec_TEW-676APBO(v1.0R).pdf
Date: 8/29/2012
File Size: 563.45 KB
Filename: GE_spec_TEW-676APBO(v1.0R).pdf
Date: 8/29/2012
File Size: 566.00 KB
Filename: SP_spec_TEW-676APBO(v1.0R).pdf
Date: 8/29/2012
File Size: 563.08 KB
Filename: RU_spec_TEW-676APBO(v1.0R).pdf
Date: 2/7/2014
File Size: 995.15 KB
Filename: IT_spec_TEW-676APBO(v1.0R).pdf
Date: 8/29/2012
File Size: 555.67 KB

Quick Installation Guide

Filename: EUNL_TEW-676APBO(V1.0R).pdf
Date: 4/19/2013
File Size: 4.92 MB
Filename: EN_Web_TEW-676APBO(1.01).pdf
Date: 3/28/2012
File Size: 1.31 MB
Filename: FR_Web_TEW-676APBO(1.01).pdf
Date: 3/28/2012
File Size: 1.39 MB
Filename: GE_Web_TEW-676APBO(1.01).pdf
Date: 3/28/2012
File Size: 1.32 MB
Filename: PO_Web_TEW-676APBO(1.01).pdf
Date: 3/28/2012
File Size: 1.28 MB
Filename: SP_Web_TEW-676APBO(1.01).pdf
Date: 3/28/2012
File Size: 1.32 MB
Filename: RU_Web_TEW-676APBO(1.01).pdf
Date: 3/28/2012
File Size: 2.06 MB

User's Guide

Filename: UG_TEW-676APBO(v1.0R).pdf
Date: 5/10/2012
File Size: 4.30 MB

Product Images

JPEG Image
File Size: : 198.06 KB
Date: : 3/28/2012
JPEG Image
File Size: : 320.11 KB
Date: : 3/28/2012
TIFF Image
File Size: : 2.43 MB
Date: : 3/28/2012
TIFF Image
File Size: : 4.07 MB
Date: : 3/28/2012
ROHS compliant WEEE crossed-out bin symbol.
Press and hold in the reset button for 10 seconds while the power is on. The default values are as follows. IP Address: 192.168.10.100 Username: root Password: root SSID: TRENDnet676 Encryption: none...
Log in to the TEW-676APBO by entering 192.168.10.100 into the address line of your browser. The default Username and Password are both root. ...
Log in to the first TEW-676APBO by entering 192.168.10.100 into the address line of your browser. The default username and password are both root. Click Wizard > Wizard Setup then click Next. Select WDS then click Next. Each unit must be configured with a unique IP address. Set...
Log in to the TEW-676APBO by entering 192.168.10.100 into the address line of your browser. The default Username and Password are both root. Click on Wireless > Virtual AP Setup then click Edit next to the Primary AP. Select the highest form of security supported by your wireless clients. ...
The TEW-676APBO comes with an internal high powered 12dBi patch antenna.
The TEW-676APBO is not an 802.3af compliant device. It uses a proprietary Power over Ethernet adapter. You must use the PoE injector that comes with the TEW-676APBO. ...
The TEW-676APBO is a 5GHz device only. It does not support 2.4GHz wireless clients.
Press and hold in the reset button for approximately 15 seconds while the power is on. The default values are as follows. IP Address: 192.168.10.100 Username: root Password: root SSID: TRENDnet676 Encryption: none ...
Hardware
Standards
  • Wired: IEEE 802.3u (100Base-TX)
  • Wireless: IEEE 802.11a/n (5 GHz)
LED Indicator
  • Power, LAN, WLAN (wireless activity)
Antenna
  • 12dBi patch antenna (polarization: V30°, H30°)
PoE
  • 1 x 10/100Mbps RJ-45 PoE port, Passive only (non-802.3af compliant)
Dimension (L x W x H)
  • 215 x 122 x 66 mm ( 8.5 x 4.8 x 2.6 in)
Weight
  • 1kg (2.2lbs)
Power Consumption
  • 15 Watts (max.)
Management
  • Web browser (HTTP/HTTPS), SNMP (v2c and 3), Telnet, SSH
Wind Speed Support
  • 210 km/hr
Waterproof
  • IP66/67 compliant
Temperature
  • Operating: -20° ~ 60°C (-4°F ~ 140°F)
  • Storage: 0° ~ 60°C (32°F ~ 140°F)
Humidity
  • Max. 95% (non-condensing)
Power
  • PoE power injector DC output: 48VDC, 0.4A
Certifications
  • FCC
Wireless
Frequency
  • 5.725 ~ 5.845 GHz
Modes
  • Router, Access Point + WDS, WDS, CPE, Client Bridge + Repeater, CPE + Access Point
Virtual Access Points
  • 7
Associated Clients (max)
  • 224 (AP Mode), 32 (Repeater Mode)
Coverage*
  • 7km line-of-sight
Modulation Technique
  • 802.11a: OFDM with BPSK, QPSK, QAM and 64QAM
  • 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Data Rate (auto-fallback)
  • 802.11a: up to 54Mbps
  • 802.11a/n: up to 300Mbps
Security
  • 64/128/152-bit WEP, WPA /WPA2-PSK, WPA/WPA2-RADIUS for AP/CPE mode, WEP/WPA2-PSK for WDS mode MAC filter (20 entries) and IP filter (20 entries)
Output Power
  • Up to 27dBm (FCC)
Receiving Sensitivity
  • 802.11a: -91dBm (typical) @ 6Mpbs
  • 802.11a/n: -68dBm (typical) @ 300Mbps
Channels
  • FCC: 149,153,157,161,165

PACKAGE CONTENTS

  • TEW-676APBO
  • CD-ROM (User's Guide)
  • Multi-Language Quick Installation Guide
  • Mounting hardware
  • PoE Injector and power cord
  • Water-proof RJ-45 plug (Network cable not included)
  • Grounding wire

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.