PoE PTZ Network Camera
TV-IP612P (Version 1.0R)
- 10x optical zoom, 16x digital zoom, and auto focus
- No need to install this camera near a power source, power and data are received through a single Ethernet cable
- Pan 330° side-to-side and tilt 115° up-and-down
- Program motion detection recording and email alerts with complimentary software
DISCONTINUED PRODUCT
The TV-IP612P (Version 1.0R) has been discontinued. It has been replaced by the TV-IP460PI (Version v1.0R). For a list of discontinued products, click here.Firmware
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware Version: 1.0.4
Firmware Release Date: 4/2015
Note:
- Update default settings
Filename: FW_TV-IP612P_TV-IP612WN(1.0.4).zip
SHA-1 Checksum: 5F641924C546079C8552D11A46F69D895A05A6D8
Date: 7/27/2017
File Size: 10.37 MB
Software
Software Version: 2.5.9
Release Date: 4/2017
Notes:
- Fixed TV-IP420P P/T issue
Filename: TRENDnetViewPro(2.5.9).zip
SHA-1 Checksum: 7CD1D9AE621816395E9FE9644B651F3696388215
Date: 7/27/2017
File Size: 41.15 MB
Datasheet
Filename: EN_Spec_TV-IP612P(V1.0R).pdf
Date: 7/29/2015
File Size: 869.27 KB
Filename: FR_spec_TV-IP612P(V1.0R).pdf
Date: 7/29/2015
File Size: 876.25 KB
Filename: GE_Spec_TV-IP612P(V1.0R).pdf
Date: 7/29/2015
File Size: 793.41 KB
Filename: SP_spec_TV-IP612P(V1.0R).pdf
Date: 7/29/2015
File Size: 893.94 KB
Filename: RU_spec_TV-IP612P(V1.0R).pdf
Date: 7/29/2015
File Size: 1.61 MB
Filename: IT_spec_TV-IP612P(V1.0R).pdf
Date: 7/29/2015
File Size: 872.82 KB
Quick Installation Guide
Filename: EN_Web_TV-IP612P(1.01).pdf
Date: 9/10/2010
File Size: 3.71 MB
Filename: FR_Web_TV-IP612P(1.01).pdf
Date: 9/10/2010
File Size: 3.74 MB
Filename: GE_Web_TV-IP612P(1.01).pdf
Date: 9/10/2010
File Size: 3.21 MB
Filename: PO_Web_TV-IP612P(1.01).pdf
Date: 9/10/2010
File Size: 1.58 MB
Filename: SP_Web_TV-IP612P(1.01).pdf
Date: 9/10/2010
File Size: 3.21 MB
Filename: RU_Web_TV-IP612P(1.01).pdf
Date: 9/10/2010
File Size: 4.09 MB
TrendnetVIEW Pro Quick Installation Guide
Filename: EN_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.63 MB
Filename: FR_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.63 MB
Filename: GE_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.62 MB
Filename: SP_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.62 MB
Filename: RU_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.64 MB
Filename: POL_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.64 MB
Filename: RO_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.65 MB
Filename: NL_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.63 MB
Filename: HU_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.64 MB
Filename: BUL_Web_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 1.62 MB
TrendnetVIEW App Quick Installation Guide
Filename: TRENDnetVIEW_App_(iOS).pdf
Date: 5/29/2015
File Size: 1.90 MB
Filename: TRENDnetVIEW_App_(Android).pdf
Date: 5/29/2015
File Size: 1.90 MB
User's Guide
Filename: UG_TRENDnetVIEW_Pro.pdf
Date: 5/29/2015
File Size: 7.92 MB
Product Images
OverviewPlease ensure you have followed the quick installation guide and have the camera setup and accessible on your home/office network. The following instructions are going to outline how to make a SecurView camera accessible over the Internet. We will start by assigning a unique static IP addres...
You will need to forward the port that the camera is using in the Router to the camera. By default this is TCP port 80. From a remote location you would enter in the public or WAN IP address of your Router into your browser.
Note: Please ensure you have configured the camera with a valid default ...
Yes, under the System>Device Management page you can disable the LED's.
...
LNK: This LED indicator lights steady orange when a valid Ethernet link is established. It blinks orange when traffic is received or transmitted through the Ethernet link.
PWR: This LED indicator lights blue when the camera is powered on. It remains dark when powered off.
...
Press and hold in the reset button on the back of the camera for approximately 15 seconds while the camera is on.
...
The TV-IP612P is a Power over Ethernet camera. The TV-IP612WN does not support Power over Ethernet.
Download the latest firmware updates from our website here.https://www.TRENDnet.com/downloads/
Firmware Upgrade Procedures
Go to camera's configuration page directly via browser or using Setup Wizard to link. Enter user name and password when prompted. (default admin/admin)
It is required t...
Open your web browser and login to the camera. Click on Motion Detection to define the motion detection area and define the sensitivity.
After defining the motion detection parameters click on Action>Recording. Define where you want the recordings to be stored and select Event based and chec...
The default IP address is 192.168.10.30.
| Camera | |
| General |
|
|---|---|
| Audio |
|
| Pan & Tilt |
|
| Image & Video |
|
| GPIO |
|
| Micro SD slot |
|
| Hardware | |
| Network |
|
| LED |
|
| Reset Button |
|
| Power Consumption |
|
| Power |
|
| Dimension |
|
| Weight |
|
| Temperature |
|
| Humidity |
|
| Certifications |
|
| Requirement | |
| To View Camera |
|
| To Run Software |
|
| IPView Pro 2.0 |
|
| Network Protocols |
|
| Management | |
| Accounts |
|
| Remote Login |
|
| Backup/Restore |
|
| Log |
|
| Settings | |
| Image |
|
| Video Setting |
|
| Recording |
|
| Snapshot |
|
| Port Settings |
|
| Dynamic DNS |
|
| Time |
|
PACKAGE CONTENTS |
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
