20-Port Gigabit Web Smart Ultra PoE Switch

TPE-204US   (Version v1.5R)

Hardware versions of (v1.xR) can be upgraded with the latest firmware to update your model to the latest hardware version.
  • 8 x Gigabit UPoE ports
  • 8 x Gigabit PoE+ ports
  • 4 x Shared Gigabit ports (RJ-45 or SFP)
  • Supports PoE (15.4W), PoE+ (30W), and UPoE (60W) power
  • 370W PoE power budget
  • Easy-to-use web-based management interface
  • PD alive check automatically attempts to recover an unresponsive PoE device connected
  • Remote cloud management with TRENDnet Hive (Additional fee applies)
  • Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping
  • Bandwidth control per port
  • Private and Voice VLAN support
  • Smart Fan
  • 40Gbps switching capacity
  • IEEE 802.1p QoS with queue scheduling support


DISCONTINUED PRODUCT

The TPE-204US (Version v1.5R) has been discontinued. For a list of discontinued products, click here.

Utility

Release Notes
Version:
2.0.5
OS Compatibility: Windows 10/11 64-bit

Important Note: Please uninstall any previous versions of the TRENDnet AP and TRENDnet Management software utilities before installing this software utility.

  • Added compatibility for both specific Hive cloud supported access point and web smart switches devices
  • Added batch multi-device Hive cloud registration feature

Filename: TRENDnet_Management_Utility(2.0.5).zip
SHA-1 Checksum: 3C8C4215DF5C530F5A27F0FF774BB2526E8D7860
Date: 3/18/2024
File Size: 69.05 MB

Firmware

Firmware Version: v3.01.027
Release Date: 03/2024
Note:

***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first, then firmware version 2.10.024 afterwards. (Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

New Feature
  • Supports TRENDnet Management Utility

Filename: FW_TPE-204US_v1(3.01.027).zip
SHA-1 Checksum: 807161C7183471AB145FB02BB09CF18D5803C43B
Date: 7/1/2024
File Size: 12.35 MB

Firmware Version: v3.01.025
Release Date: 07/2023
Note:

***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first, then firmware version 2.10.024 afterwards. (Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

Fixes
  • Fixed PoE Utilization table

Filename: FW_TPE-204US_fw_3.01.025.zip
SHA-1 Checksum: 51E37C968FEE70455CCBBB92B421D72FF661CBFA
Date: 7/21/2023
File Size: 12.34 MB

Other

MIB
Version: 3.00.002
Release Date: 3/2022
Note:
  • Added auto firmware upgrade feature

Filename: MIB_TPE-204US_v1(3.00.002).zip
Date: 3/10/2022
File Size: 115.63 KB

Datasheet

Filename: EN_datasheet_TPE-204US_(v1.5R).pdf
Date: 8/4/2021
File Size: 422.37 KB
Filename: FR_datasheet_TPE-204US_(v1.5R).pdf
Date: 8/4/2021
File Size: 418.49 KB
Filename: GE_datasheet_TPE-204US_(v1.5R).pdf
Date: 8/4/2021
File Size: 417.94 KB
Filename: PO_datasheet_TPE-204US_(v1.5R).pdf
Date: 8/4/2021
File Size: 419.69 KB
Filename: SP_datasheet_TPE-204US_(v1.5R).pdf
Date: 8/4/2021
File Size: 418.32 KB
Filename: RU_datasheet_TPE-204US_(v1.5R).pdf
Date: 8/4/2021
File Size: 399.27 KB
Filename: IT_datasheet_TPE-204US_(v1.5R).pdf
Date: 8/4/2021
File Size: 416.58 KB

User's Guide

Filename: TRENDnet_Hive_User_Guide_08172021.pdf
Date: 10/6/2021
File Size: 2.45 MB

Product Images

PNG Image
File Size: : 430.63 KB
Date: : 9/17/2021
PNG Image
File Size: : 234.65 KB
Date: : 9/17/2021
PNG Image
File Size: : 243.72 KB
Date: : 9/17/2021
ROHS compliant WEEE crossed-out bin symbol.
You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
Only managed or web smart PoE Switches will have reset instruction. Unmanaged PoE Switches are not configurable and do not have settings to reset. Your Switch will have a reset button. This button is typically recessed and located on the front or the back of the Switch. You will need a small pin or ...
A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website. The TPE-204US power budget is 370W....
The TPE-204US supports IEEE 802.3af and 802.3at PoE standards. TRENDnet PoE Switches typically support IEEE industry standards. Please check detailed product specifications under the Product section of our website. If your device is not IEEE PoE compliant it may not be compatible with TRENDnet PoE S...
Standards
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1s
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3z
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3af
  • IEEE 802.3at
  • IEEE 802.3az
  • IEEE 802.3bt (draft)
Device Interface
  • 8 x Gigabit Ultra PoE ports
  • 8 x Gigabit PoE+ ports
  • 4 x Gigabit shared ports (RJ-45 or SFP)
  • LED indicators
  • LED Display mode button (toggles LED indicators to display link/activity or PoE only port status)
Data Transfer Rate
  • Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit Ethernet: 2000Mbps (full duplex)
Performance
  • Switch fabric: 40Gbps
  • RAM buffer: 512KB
  • MAC Address Table: 8K entries
  • Jumbo Frames: 10KB
  • HOL Blocking Prevention
  • Forwarding rate: 29.8Mpps (64-byte packet size)
Management
  • HTTP/HTTPS (SSL v2/3 TLS) web-based GUI
  • SNMP v1, v2c, v3
  • RMON v1
  • Static Unicast MAC address
  • Enable/disable 802.3az power saving
  • LLDP and LLDP-MED
  • Virtual cable diagnostics test
  • IPv6: IPv6 neighbor discovery, IPv6 Static IP, DHCPv6, auto configuration
Hive Cloud Management
  • Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser
  • Multi-device management
  • Provisioning through scheduled batch firmware or configuration updates for multiple switches
  • Event/hardware network monitoring (CPU/memory utilization)
  • Enable & disable PoE, set PD (powered device) alive check, configure PoE scheduling, and monitor PoE budget utilization (for PoE switches only)
  • Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
MIB
  • IP FORWARD TABLE MIB RFC 1354
  • RMON MIB RFC 1271
  • IPV4 MIB RFC 1213
  • IPV6 MIB RFC 2465
  • GVRP MIB IEEE 802.1Q-VLAN
  • LA MIB IEEE 802.3ad
  • LLDP MIB IEEE 802.1AB
  • IGMP SNOOPING MIB RFC 2933
  • MLD SNOOPING MIB RFC 3019
  • PRIVATE VLAN MIB IEEE 802.1Q
  • DHCPSNOOP MIB RFC 2026
  • QOS MIB RFC 4323
  • SNMP MIB RFC 3415
  • STP MIB RFC 4318
  • PNAC MIB IEEE 802.1x
  • VLAN MIB IEEE 802.1q
  • DNS MIB RFC 1611
  • ACL MIB
  • BANDWIDTH CTRL MIB
  • LBD MIB
  • MIRROR MIB
  • IPV6 NEIGHBOR MIB
  • SNTP MIB
  • STORM CTRL MIB
  • STATISTICS MIB
  • TOOL MIB
  • VOICE VLAN MIB
  • DOS MIB
Spanning Tree
  • IEEE 802.1d STP (Spanning Tree protocol)
  • IEEE 802.1w RSTP (Rapid Spanning Tree protocol)
  • IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
Link Aggregation
  • 802.3ad Dynamic LACP
  • Static Link Aggregation
Quality of Service (QoS)
  • 802.1p Class of Service (CoS)
  • DSCP (Differentiated Services Code Point)
  • Bandwidth control per port
  • Queue Scheduling: strict priority, weighted round robin (WRR)
VLAN
  • Multiple management VLAN assignment
  • Asymmetric VLAN
  • 802.1Q Tagged VLAN
  • GVRP
  • Up to 256 VLAN groups, ID Range 1-4094
  • Private VLAN (Protected Ports)
  • Voice VLAN (10 user defined OUIs)
Multicast
  • IGMP Snooping v1, v2, v3
  • Static Multicast Address
  • Up to 256 multicast entries
Port Mirror
  • Rx, Tx, or Both
  • One to one, many to one
Encryption
  • 802.1X Port-Based Network Access Control , RADIUS, TACACS+
  • Local Dial-in User Authentication
  • DHCP Snooping
  • Loopback Detection
  • Duplicated Address Detection
  • Trusted Host
  • Denial of Service (DoS)
ACL IPv4 L2-L4 & IPv6
  • MAC Address
  • VLAN ID
  • Ether Type (IPv4 only)
  • IP Protocol 0-255
  • TCP/UDP Port 1-65535
  • 802.1p
  • DSCP (IPv4 only)
  • IPv6 Address (IPv6 only)
Compatibility
  • Optional Software Utility: Windows® 10, 8.1, 8, 7, and Windows® Server 2003/2008/2012/2016
Power
  • Input: 100 – 240V AC, 50/60Hz, internal power supply
  • Max. consumption: 25.2W (No PoE load)
PoE
  • PoE budget: 370W
  • 802.3at: up to 30W per port (ports 1-8)
  • 802.3bt: up to 60W per port (ports 9-16)
  • Mode A: Pins 1,2 for power+ and pins 3,6 for power – (mode A)
  • PD auto/manual classification
  • PoE port priority
  • PoE power scheduling
  • Over current/short circuit protection
  • PD alive check
Fan/Acoustics
  • Quantity: 2
  • Max Noise Level: 52.8 dBA
MTBF
  • 279,589 hours
Operating Temperature
  • -5° – 50°C (23° - 122°F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 440 x 250 x 44mm (17.3 x 9.8 x 1.74 in.)
  • Rack mountable 1U height
Weight
  • 3.86kg (8.49 lbs.)
Certifications
  • CE
  • FCC
  • UL
Warranty
  • 3 year

PACKAGE CONTENTS

  • TPE-204US
  • Quick Installation Guide
  • Power cord (1.8m/6 ft.)
  • Rackmount kit

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.