SFP Single Mode LC Module (80km)
TEG-MGBS80 (Version v5.0R)
- Transmission distance of up to 80km (49.7 mi.)
- Duplex LC optical interface
- Supports data rates of up to 1.25Gbps
- Supports 1550nm singlemode network transmissions
- Low Electromagnetic Interference (EMI) design
- Compliant with IEEE 802.3z Gigabit Ethernet
- ANSI Fiber Channel compliant
- Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
- Low power consumption
- NDAA / TAA compliant (U.S. and Canada only)
Datasheet
Filename: EN_datasheet_TEG-MGBS80_(v5.0R).pdf
Date: 3/10/2022
File Size: 616.11 KB
Filename: FR_datasheet_TEG-MGBS80_(v5.0R).pdf
Date: 3/10/2022
File Size: 676.52 KB
Filename: GE_datasheet_TEG-MGBS80_(v5.0R).pdf
Date: 3/10/2022
File Size: 669.61 KB
Filename: PO_datasheet_TEG-MGBS80_(v5.0R).pdf
Date: 3/10/2022
File Size: 663.17 KB
Filename: SP_datasheet_TEG-MGBS80_(v5.0R).pdf
Date: 3/10/2022
File Size: 630.88 KB
Filename: RU_datasheet_TEG-MGBS80_(v5.0R).pdf
Date: 3/10/2022
File Size: 707.05 KB
Filename: IT_datasheet_TEG-MGBS80_(v5.0R).pdf
Date: 3/10/2022
File Size: 635.36 KB
Quick Installation Guide
Filename: QIG_SFP_Module_TEG-MGBSX_MGBS10_MGBS40.pdf
Date: 3/10/2022
File Size: 2.72 MB
Product Images
TRENDnet SFP module TEG-MGBS80 has an LC type connector.
While TRENDnet cannot guarantee compatibility with third party hardware, TRENDnet does not employ or implement proprietary mechanisms within our SFP modules. If the third party Switch adheres to specifications and also does not use proprietary measures they should be compatible....
You will need to identify the type of fiber cable you have. Whether it is multi-mode or single mode, if it is 62.5/125 μm or 50/125 μm, etc. Typically you can verify the cable type from the cable jacket, your network documentation or the specifications of the devices you currently have con...
Transmit and Receive connectors will be inverted on the remote side. The fiber will not link if you connect a Transmit and Receive interface to the Transmit and Receive interface on the remote side. They should be connected TX to RX and RX to TX....
| Standards |
|
|---|---|
| Device Interface |
|
| Data Transfer Rate |
|
| Wavelength |
|
| Optical Output Power |
|
| Distance |
|
| Special Features |
|
| Sensitivity |
|
| Power |
|
| Operating Temperature |
|
| Operating Humidity |
|
| Dimensions |
|
| Weight |
|
| Certifications |
|
| Warranty |
|
PACKAGE CONTENTS |
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
