10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit

TEW-740APBO2K   (Version v3.1R)

  • Wireless N300 point-to-point networking (2.4 GHz)
  • Includes two preconfigured wireless N access points
  • IP56 outdoor weather rated housing
  • Built-in 10 dBi directional antenna
  • Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes
  • Proprietary PoE power adapters included
  • 1 x 10/100Mbps PoE-in port, and 1 x 10/100Mbps port
  • NDAA / TAA compliant (U.S. and Canada only)
NDAA/TAA Compliant

Firmware

Firmware applies to /A version only.
**If upgrading from firmware version 3.02K or below to 3.03K or above,
use the webimg_TEW-740APBO2K_X_old_upg file to upgrade
(Firmware file is included in this download)**


**If upgrading from firmware version 3.03K or above,
use the webimg_TEW-740APBO2K_X file to upgrade
(Firmware file is included in this download)
**
**Download the correct firmware file depending on your device region, A or EU.
**The (A) version file applies to devices with /A noted on the device label. The (EU) version file applies to devices with the /EU or /UK noted on the device label.

DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only

TEW-740APBO2K H/W: v3.1R
Firmware Version : 3.05K
Release Date: 1/2023
Note:

  • Updated curl version 7.86.
  • Updated openssl package version 1.1.1s.
  • Updated dnsmasq version 2.88.
  • Fixed cgi command injection vulnerability.

Filename: FW(EU)_TEW-740APBO2K_v3(3.05K).zip
SHA-1 Checksum: 5E9AFCFB104BAFC60F3FC0223B59F3107284D76E
Date: 1/25/2023
File Size: 22.48 MB
Firmware applies to /A version only.
**If upgrading from firmware version 3.02K or below to 3.03K or above,
use the webimg_TEW-740APBO2K_X_old_upg file to upgrade
(Firmware file is included in this download)**


**If upgrading from firmware version 3.03K or above,
use the webimg_TEW-740APBO2K_X file to upgrade
(Firmware file is included in this download)
**
**Download the correct firmware file depending on your device region, A or EU.
**The (A) version file applies to devices with /A noted on the device label. The (EU) version file applies to devices with the /EU or /UK noted on the device label.

DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only

TEW-740APBO2K H/W: v3.1R
Firmware Version : 3.05K
Release Date: 1/2023
Note:

  • Updated curl version 7.86.
  • Updated openssl package version 1.1.1s.
  • Updated dnsmasq version 2.88.
  • Fixed cgi command injection vulnerability.

Filename: FW(A)_TEW-740APBO2K_v3(3.05K).zip
SHA-1 Checksum: B2DE8A29AFE1E25EEA82848DAEAAB918E29C150C
Date: 1/25/2023
File Size: 22.48 MB

Datasheet

Filename: EN_datasheet_TEW-740APBO2K_(v3.1R).pdf
Date: 8/27/2021
File Size: 796.46 KB
Filename: FR_datasheet_TEW-740APBO2K_(v3.1R).pdf
Date: 8/27/2021
File Size: 809.15 KB
Filename: GE_datasheet_TEW-740APBO2K_(v3.1R).pdf
Date: 8/27/2021
File Size: 774.79 KB
Filename: PO_datasheet_TEW-740APBO2K_(v3.1R).pdf
Date: 8/27/2021
File Size: 800.53 KB
Filename: SP_datasheet_TEW-740APBO2K_(v3.1R).pdf
Date: 8/27/2021
File Size: 813.81 KB
Filename: RU_datasheet_TEW-740APBO2K_(v3.1R).pdf
Date: 8/27/2021
File Size: 831.37 KB
Filename: IT_datasheet_TEW-740APBO2K_(v3.1R).pdf
Date: 8/27/2021
File Size: 779.79 KB

Quick Installation Guide

Filename: English_TEW-740APBO2K_v3.0R_081121.pdf
Date: 9/3/2021
File Size: 5.17 MB
Filename: French_TEW-740APBO2K_v3.0R_081121.pdf
Date: 9/3/2021
File Size: 4.31 MB
Filename: German_TEW-740APBO2K_v3.0R_081121.pdf
Date: 9/3/2021
File Size: 3.41 MB
Filename: Portuguese_TEW-740APBO2K_v3.0R_081121.pdf
Date: 9/3/2021
File Size: 3.42 MB
Filename: Spanish_TEW-740APBO2K_v3.0R_081121.pdf
Date: 9/3/2021
File Size: 3.40 MB
Filename: Russian_TEW-740APBO2K_v3.0R_081121.pdf
Date: 9/3/2021
File Size: 3.28 MB
Filename: Italian_TEW-740APBO2K_v3.0R_081121.pdf
Date: 9/3/2021
File Size: 3.42 MB

User's Guide

Filename: UG_TEW-740APBO(v3).pdf
Date: 7/22/2021
File Size: 2.88 MB

Product Images

PNG Image
File Size: : 2.53 MB
Date: : 7/22/2021
PNG Image
File Size: : 1.75 MB
Date: : 7/22/2021
PNG Image
File Size: : 1.91 MB
Date: : 7/22/2021
PNG Image
File Size: : 1.81 MB
Date: : 7/22/2021
PNG Image
File Size: : 3.16 MB
Date: : 7/22/2021
PNG Image
File Size: : 3.26 MB
Date: : 7/22/2021
PNG Image
File Size: : 1.63 MB
Date: : 7/22/2021
PNG Image
File Size: : 8.91 MB
Date: : 5/8/2024
ROHS compliant WEEE crossed-out bin symbol.
In this video, we’ll go over a few installation tips that will help with the setup of your TRENDnet outdoor wireless access points, models TEW-740APBO2K and TEW-840APBO2K. ...
Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1X
  • IEEE 802.11d
  • IEEE 802.11e
  • IEEE 802.11f
  • IEEE 802.11h
  • IEEE 802.11i
  • IEEE 802.11b
  • IEEE 802.11g
  • IEEE 802.11k
  • IEEE 802.11n (2.4GHz up to 300Mbps)
  • IEEE 802.11r
Hardware Interface
  • 1 x 10/100Mbps LAN1 port (proprietary PoE max. cable length 60m (197 ft.))
  • 1 x 10/100Mbps LAN2 port
  • LED indicators
  • Reset button
  • Grounding Point
Special Features
  • IP56 weather rated
  • 802.1Q VLAN assignment per SSID
  • Schedule radio on/off time policy
  • 802.11r / 802.11k fast roaming
  • Preconfigured point-to-point bridge kit
Access Control
  • Wireless encryption: WPA/WPA2-PSK, WPA/WPA2-Enterprise, 802.1X
  • Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP/L2TP/IPsec VPN Passthrough
  • Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting
  • 802.1Q VLAN
  • OAuthentication 2.0 / Walled Garden for guest authentication
  • Customizable captive portal for guest authentication
QoS
  • WMM
Operation Modes
  • Access Point (AP)
  • Access Point (AP) + WDS
  • Wireless Distribution System (WDS)
  • WISP (CPE) + AP
  • Client Bridge + AP
  • Router
  • Control AP (CAP)
SSID
  • Up to 7 SSIDs
Internet Connection Types (WISP (CPE) + AP & Router modes)
  • Dynamic IP (DHCP)
  • Static IP (Fixed)
  • PPPoE (Dynamic IP/Static IP)
  • PPTP (Dynamic IP/Static IP)
Management/Monitoring
  • Local/remote web-based management (HTTP, HTTPS)
  • Local/remote CLI based management (Telnet, SSH)
  • SNMP v2c/v3
  • SNMP Trap
  • Upgrade firmware
  • Backup/restore configuration
  • Event logging
  • Authentication log
  • Reboot
  • Restore to factory defaults
  • Ping test
  • Traceroute
  • LED Control
Frequency
  • FCC: 2.412 - 2.462GHz
  • ETSI: 2.412 – 2.472GHz
  • IC: 2.412 - 2.462GHz
Wireless Channels
  • FCC: 1-11
  • ETSI: 1-13
Modulation
  • 802.11b: DBPK, DQPSK, CCK with DSSS
  • 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
Media Access Protocol
  • CSMA/CA with ACK
Antenna Gain
  • 10 dBi internal sector antenna
Wireless Output Power
  • 802.11b: FCC: 26 dBm (max.) / CE: 10.4 dBm (max.) / IC: 26 dBm (max.) @ 11Mbps
  • 802.11g: FCC: 25 dBm (max.), CE: 10.5 dBm (max.) / IC: 25 dBm (max.) @ 54Mbps
  • 802.11n: FCC: 28 dBm (max.), CE: 10.6 dBm (max.) / IC: 28 dBm (max.) @ 150Mbps
  • 802.11n: FCC: 27 dBm (max.), CE: 10.6 dBm (max.) / IC: 27 dBm (max.) @ 300Mbps
Receiving Sensitivity
  • 802.11b: -88 dBm (typical) @ 11Mbps
  • 802.11g: -74 dBm (typical) @ 54Mbps
  • 802.11n: -71 dBm (typical) @ 150Mbps
  • 802.11n: -69 dBm (typical) @ 300Mbps
Power
  • Input: 100 – 220V AC, 50/60Hz, 0.5A
  • Output: 12V DC, 1A proprietary/passive PoE injector
  • Max. Consumption: 6.6W
Operating Temperature
  • -22° – 60° C (-7.6° – 140° F)
Operating Humidity
  • Max. 99% non-condensing
Certifications
  • FCC
  • CE
  • IC
Dimensions
  • 195 x 118 x 61mm (7.6 x 4.6 x 2.4 in.) per access point
Weight
  • 304g (10.7 oz.) per access point
Warranty
  • 3 year

PACKAGE CONTENTS

  • 2 x TEW-740APBO
  • Quick Installation Guide
  • Proprietary/Passive PoE injectors
  • Power adapters (12V DC, 1A)
  • Grounding wires
  • Mounting hardware
  • 2 X Rubber seals

* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally, environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.

** For optimal PoE distance from the PoE injector to the wireless access point, it is recommended to use a Cat 5e or better solid wire cable and connect the injector’s power supply directly to a power outlet. Avoid using a power strip or surge protector.


All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.