28-Port Gigabit Web Smart Switch

TEG-284WS   (Version v1.5R)

Hardware versions of (v1.xR) can be upgraded with the latest firmware to update your model to the latest hardware version.
  • 24 x Gigabit ports
  • 4 x Shared Gigabit ports (RJ-45/SFP)
  • Easy to use web-based management interface
  • Remote cloud management with TRENDnet Hive (Additional fee applies)
  • Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping
  • Bandwidth control per port
  • Private and Voice VLAN support
  • 56Gbps switching capacity
  • IEEE 802.1p QoS with queue scheduling support
  • Fanless rack mountable metal housing
  • NDAA / TAA compliant (U.S. and Canada only)


NDAA/TAA Compliant

Utility

Release Notes
Version:
2.0.5
OS Compatibility: Windows 10/11 64-bit

Important Note: Please uninstall any previous versions of the TRENDnet AP and TRENDnet Management software utilities before installing this software utility.

  • Added compatibility for both specific Hive cloud supported access point and web smart switches devices
  • Added batch multi-device Hive cloud registration feature

Filename: TRENDnet_Management_Utility(2.0.5).zip
SHA-1 Checksum: 3C8C4215DF5C530F5A27F0FF774BB2526E8D7860
Date: 3/18/2024
File Size: 69.05 MB

Firmware

Firmware Version: v3.01.027
Release Date: 3/2024
Note:

  • Supports TRENDnet Management Utility


Filename: TEG-284WS_FW_3.01.027.zip
SHA-1 Checksum: 1DDF149BB267DA0BE3D0088F0E7D7EB863191D8E
Date: 3/6/2024
File Size: 12.35 MB

Firmware Version: v3.01.025
Release Date: 07/2023
Note:

***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first, then firmware version 2.10.024 afterwards. (Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

Fixes
  • Fixed PoE Utilization table

Filename: FW_TEG-284WS_fw_3.01.025.zip
SHA-1 Checksum: 51E37C968FEE70455CCBBB92B421D72FF661CBFA
Date: 7/21/2023
File Size: 12.34 MB

Firmware Version: v3.01.012
Release Date: 08/2021
Note:

* This download includes Firmware version 3.0.012, Firmware version 2.10.024 and Firmware version 1.10.026.
** If your firmware version is between firmware version 1.00.xx 1.00.023, please install firmware version 1.10.026 before upgrading to firmware version 2.10.024.
***If your firmware version is between firmware version 2.0.xx to 2.10.011, please install firmware version 2.10.024 first before upgrading to firmware version 3.01.012
If it is the first time upgrading the switch from 1.00.010 to 2.10.010 or above, it is recommended to manually reset the device to factory default and clear web browser cache after the loading firmware file.

  • New GUI
  • Add Ping Watchdog feature
  • Adds Cloud enabled feature (TRENDnet Hive)
  • Adds capability to backup, copy, restore config functions on Hive
  • Adds capability to configure additional QoS functions
  • Sync time settings from Hive
  • Bug Fixes

Filename: TEG-284WS_3-01-012.zip
SHA-1 Checksum: 3C2E0C0D5D9686511A697238596E801434513A68
Date: 5/5/2022
File Size: 33.14 MB

Other

MIB
Version: 3.00.002
Release Date: 3/2022
Note:
  • Added auto firmware upgrade feature

Filename: MIB_TEG-284WS_v1(3.00.002).zip
Date: 3/10/2022
File Size: 111.65 KB

Datasheet

Filename: EN_datasheet_TEG-284WS_(v1.5R).pdf
Date: 4/27/2022
File Size: 466.23 KB
Filename: FR_datasheet_TEG-284WS_(v1.5R).pdf
Date: 4/27/2022
File Size: 467.92 KB
Filename: GE_datasheet_TEG-284WS_(v1.5R).pdf
Date: 4/27/2022
File Size: 469.03 KB
Filename: PO_datasheet_TEG-284WS_(v1.5R).pdf
Date: 4/27/2022
File Size: 470.43 KB
Filename: SP_datasheet_TEG-284WS_(v1.5R).pdf
Date: 4/27/2022
File Size: 463.58 KB
Filename: IT_datasheet_TEG-284WS_(v1.5R).pdf
Date: 4/27/2022
File Size: 467.26 KB

User's Guide

Filename: TRENDnet_Hive_User_Guide_08172021.pdf
Date: 10/6/2021
File Size: 2.45 MB
Filename: Web_Smart_Switch_Series_User_Guide_11122020.pdf
Date: 1/11/2021
File Size: 4.13 MB

Product Images

PNG Image
File Size: : 1.19 MB
Date: : 9/17/2021
PNG Image
File Size: : 868.46 KB
Date: : 9/17/2021
PNG Image
File Size: : 767.21 KB
Date: : 9/17/2021
ROHS compliant WEEE crossed-out bin symbol.
You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
Only managed or web smart PoE Switches will have reset instruction. Unmanaged PoE Switches are not configurable and do not have settings to reset. Your Switch will have a reset button. This button is typically recessed and located on the front or the back of the Switch. You will need a small pin or ...
A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
Standards
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1s
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3z
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3az
Device Interface
  • 24 x Gigabit ports
  • 4 x shared Gigabit ports (RJ-45/SFP)
  • LED indicators
Data Transfer Rate
  • Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit Ethernet: 2000Mbps (full duplex)
Performance
  • Switch fabric: 56 Gbps
  • RAM buffer: 512KB
  • MAC Address Table: 8K entries
  • Jumbo Frames: 10KB
  • HOL Blocking Prevention
  • Forwarding rate: 41.7Mpps (64-byte packet size)
Management
  • HTTP/HTTPS (SSL v2/3 TLS) Web based GUI
  • SNMP v1, v2c, v3
  • RMON v1
  • Static Unicast MAC Address
  • Enable/disable 802.3az Power Saving
  • LLDP and LLDP-MED
  • Virtual Cable Diagnostics Test
  • IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration
Hive Cloud Management
  • Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser
  • Multi-device management
  • Provisioning through scheduled batch firmware or configuration updates for multiple switches
  • Event/hardware network monitoring (CPU/memory utilization)
  • Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
MIB
  • IP FORWARD TABLE MIB RFC 1354
  • RMON MIB RFC 1271
  • IPV4 MIB RFC 1213
  • IPV6 MIB RFC 2465
  • GVRP MIB IEEE 802.1Q-VLAN
  • LA MIB IEEE 802.3ad
  • LLDP MIB IEEE 802.1AB
  • IGMP SNOOPING MIB RFC 2933
  • MLD SNOOPING MIB RFC 3019
  • PRIVATE VLAN MIB IEEE 802.1Q
  • DHCPSNOOP MIB RFC 2026
  • QOS MIB RFC 4323
  • SNMP MIB RFC 3415
  • STP MIB RFC 4318
  • PNAC MIB IEEE 802.1x
  • VLAN MIB IEEE 802.1q
  • DNS MIB RFC 1611
  • ACL MIB
  • BANDWIDTH CTRL MIB
  • LBD MIB
  • MIRROR MIB
  • IPV6 NEIGHBOR MIB
  • SNTP MIB
  • STORM CTRL MIB
  • STATISTICS MIB
  • Tool MIB
  • VOICE VLAN MIB
  • DOS MIB
Spanning Tree
  • IEEE 802.1D STP (Spanning Tree protocol)
  • IEEE 802.1w RSTP (Rapid Spanning Tree protocol)
  • IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
Link Aggregation
  • Static Link Aggregation
  • 802.3ad Dynamic LACP
Quality of Service (QoS)
  • 802.1p Class of Service (CoS)
  • DSCP (Differentiated Services Code Point)
  • Bandwidth Control per port
  • Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)
VLAN
  • Multiple management VLAN assignment
  • Asymmetric VLAN
  • 802.1Q Tagged VLAN
  • Dynamic GVRP
  • Up to 256 VLAN groups, ID Range 1-4094
  • Private VLAN (Protected Ports)
  • Voice VLAN (10 user defined OUIs)
Multicast
  • IGMP Snooping v1, v2, v3 (per VLAN)
  • Static Multicast Address
  • Up to 256 multicast entries
Port Mirror
  • RX, TX, or Both
  • One to one
Encryption
  • 802.1X Port-Based Network Access Control , RADIUS, TACACS+
  • Local Dial In User Authentication
  • DHCP Snooping (per VLAN)
  • Loopback Detection
  • Duplicated Address Detection
  • Trusted Host
  • Denial of Service (DoS)
ACL IPv4 L2-L4 & IPv6
  • MAC Address
  • VLAN ID
  • Ether Type (IPv4 only)
  • IP Protocol 0-255
  • TCP/UDP Port 1-65535
  • 802.1p
  • DSCP (IPv4 only)
  • IPv6 Address (IPv6 only)
Compatibility
  • Optional Software Utility: Windows® 10, 8.1, 8, 7, Vista, XP, Windows® 2003/2008 Server
Special Features
  • Fanless Design
  • IPv6
  • 802.3az power saving
  • Rack mountable
Power
  • Input: 100 - 240 V AC, 50/60 Hz, internal power supply
  • Consumption: 17.3 Watts (max.)
MTBF
  • 787,004 hours
Operating Temperature
  • -5 – 50°C (23 - 122°F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 440 x 140 x 44mm (17.4 x 5.51 x 1.74 in.)
  • Rack mountable 1U height
Weight
  • 2.15kg (4.73 lbs.)
Certifications
  • CE
  • FCC
  • UL
Warranty
  • 3 year warranty

PACKAGE CONTENTS

  • TEG-284WS
  • Quick Installation Guide
  • CD-ROM (Utility & User's Guide)
  • Power cord (1.8m/6 ft.)
  • Rack mount kit

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in Europe