Routeur câble/DSL à 4 ports avec pare-feu et serveur USB d'impression
TW100-BRF114U
DISCONTINUED PRODUCT
The TW100-BRF114U has been discontinued. It has been replaced by the TW100-S4W1CA (Version v2.1R). For a list of discontinued products, click here.Utilitaires
Nom de fichier: Driver_Utility_TW100BRF114U.zip
Date: 9/21/2004
Taille du fichier: 876.23 KB
Firmware
Description:
Firmware Version: 1.1.1.0
Release Date: 12.2006
Firmware Nom de fichier: “TW100-BFR114U_FW1110.img”
TW100-BRF114U Cable/DSL 4-Port Firewall Router w/ USB Print Server
Nom de fichier: Firmware_TW100-BRF114U(1110).zip
SHA-1 Checksum: 2EA27E05725082716281E73660CA80525ED51FF2
Date: 7/28/2017
Taille du fichier: 496.48 KB
Feuilles de données
Nom de fichier: EN_Spec_TW100-BRF114U.pdf
Date: 7/20/2006
Taille du fichier: 293.12 KB
Nom de fichier: FR_Spec_TW100-BRF114U.pdf
Date: 7/20/2006
Taille du fichier: 298.00 KB
Nom de fichier: GE_Spec_TW100-BRF114U.pdf
Date: 7/20/2006
Taille du fichier: 298.47 KB
Nom de fichier: SP_Spec_TW100-BRF114U.pdf
Date: 7/20/2006
Taille du fichier: 295.76 KB
Nom de fichier: RU_Spec_TW100-BRF114U.pdf
Date: 7/20/2006
Taille du fichier: 1.23 MB
Guide d'installation rapide
Nom de fichier: QIG_TW100-BRF114U_EN.pdf
Date: 10/27/2004
Taille du fichier: 3.97 MB
Nom de fichier: QIG_TW100-BRF114U_FR.pdf
Date: 10/27/2004
Taille du fichier: 4.12 MB
German Guide d'installation rapide
Nom de fichier: QIG_TW100-BRF114U_GE.pdf
Date: 10/27/2004
Taille du fichier: 1.12 MB
Spqnish Guide d'installation rapide
Nom de fichier: QIG_TW100-BRF114U_SP.pdf
Date: 10/27/2004
Taille du fichier: 4.23 MB
Nom de fichier: QIG_TW100-BRF114U(estonian).pdf
Date: 12/2/2005
Taille du fichier: 2.24 MB
Guide de l'utilisateur
Nom de fichier: UG_TW100-BRF114U.pdf
Date: 8/25/2004
Taille du fichier: 1.17 MB
Frequently Asked Questions (FAQ)
Images produit
Step 1 Go to Start>Settings>Printers>Add
New Printer (WinXP - Start>Printers and Faxes>Add
a Printer).
Step 2 Select Local Printer. Make sure to uncheck Automatically
detect and install my plug and play printer. Click Next.
Step 3 Select Create a New Port and select S...
In Windows 98/Me you will need to install the LPR client.
For Windows 98/ME you will also need to know the port name that you are printing
to (The Port Name is L1.
Installing LPR:
Step 1 Once the file is downloaded and extracted, Go to Start > Settings > Control
Panel > doubl...
The port name is "L1", without the quotes and it is case sensitive.
Open your web browser and type the IP address of the TW100-BRF114U in the
address bar. The default IP address is 192.168.0.1. At the login, enter your
username (blank) and password (blank). NOTE: If the Setup Wizard starts, click
on Cancel.
Put a check mark in the Enable box. Rename the serv...
The MAC Address can be found on a label on the bottom of the router. You
can alternately find it by doing the following:
1. Open your web browser and type
the IP address of the TW100-BRF114U in the address bar. The default IP address
is 192.168.0.1. At the login, enter your username (bla...
Click Start then click on the Control Panel.
For Windows 2000 click on Start, highlight settings then click
on the Control Panel.
1. Double-Click on the Network Connection icon.
2. Right-Click
on the Local Area Connection icon then click
on Properties.
3. Highlight the Internet P...
1. Open your web browser and type the IP address of the TW100-BRF114U in
the address bar. The default IP address is 192.168.0.1. At the login, enter
your username (blank) and password (blank). NOTE: If the Setup Wizard starts,
click on Cancel.
2. Click on LAN on the left hand side.
3...
The default username & password for the TW100-BRF114U are both (blank). There is no username and password set by default....
The default IP address for the TW100-BRF114U is 192.168.0.1.
1. Locate the reset button on the back of the TW100-BRF114U.
2. Press and hold in
the reset button for approximately 15 seconds. This will reset the unit back
to its default configuration.
...
A: Open your web browser and type the IP address of the TW100-BRF114U in the
address bar. The default IP address is 192.168.0.1. At the login, enter your
username (blank) and password (blank). NOTE: If the Setup Wizard starts, click
on Cancel.
1. Click on Password on the left hand side.
...
A: Note: The default setting of the router is configured for a Cable connection
using a Dynamic IP Address.
1. Open your web browser and type the IP address
of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1.
At the login, enter your username (blank) and pass...
Open your web browser and type the IP address of the TW100-BRF114U in the
address bar. The default IP address is 192.168.0.1. At the login, enter your
username (blank) and password (blank). NOTE: If the Setup Wizard starts, click
on Cancel.
Click on Advanced then WAN Port on the left
hand...
First, verify that the Printer LED on the TW100-BRF114U is lit. If it isn't, ensure that both your printer and the TW100-BRF114U are turned on and that the USB cable is securely connected to the connectors on both devices. Then, try bro...
Option 1: Click the Status button on the TW100-BRF114U's main configuration page. On the Status page, click the Connection Detail button. Click the Release/Renew button to allow the router to refresh the connection to your ISP. Then, try browsing a website such as https://www.TRENDnet.com again with...
You can simply contact your Internet Service Provider's (ISP) Customer Service or Technical Support Department for the correct information. ...
Please verify your hardware and TCP/IP settings again by following the instructions in sections 2-3, and make sure the Power, WAN, and the LAN lights on the AP/Router's front panel are on. Then, try accessing 192.168.0.1 again using your web browser. ...
| Matériel | |
| Normes: |
|
|---|---|
| Protocoles: | NAT, PPPoE, HTTP, DHCP, TCP/IP, UDP, PAP, CHAP, RIP1, RIP2, DDNS |
| WAN: | 1 port 10/100Mbps (Internet) |
| LAN: | 4 ports 10/100Mbps Auto-MDIX |
| Port imprimante: | 1 port USB 1.1 |
| Voyants lumineux: | Par unité : alimentation, état, WAN; Ports LAN : Link/Act, 100 |
| LAN Ports: | Link/Act, 100 |
| Adaptateur secteur: | 12V DC, 800mA |
| Dimensions (L x l x H): | 141 x 100 x 27 mm |
| Poids: | 0,36 kg |
| Température: |
|
| Humidité: |
|
| Certifications: | CE, VCCI |
| Routeur | |
| Pare-feu: | Pare-feu NAT, pare-feu SPI |
| Sécurité: | Filtre URL, contrôle d'accès, protection par mot de passe, alerte e-mail et journaux |
| Communication: | IPSec, PPTP, L2TP (100 sessions) |
| Serveur d'impression | |
| Protocole: | TCP/IP |
| Mode d'impression: | PTP (Peer-to-Peer) sur TCP/IP, LPD |
Toutes les références au débit ne sont données qu’à titre de comparaison. Les spécifications, la taille et la forme du produit sont sujettes à modification sans avis préalable, et l’apparence réelle du produit peut différer de celle illustrée ici.
