Drahtloser 108 MBit/s 802.11g Firewall-Router
TEW-452BRP (Version B1.1R)
- XR-Technologie erlaubt doppelte Geschwindigkeit von Wireless-G*
- Videos empfangen, Dateien herunterladen und Spiele spielen
- Netzwerk mit Hilfe der „Easy-Go“-CD in kürzester Zeit erstellbar
- Hohe Datensicherheit dank doppelter Firewall und fortgeschrittener drahtloser Verschlüsselungstechnologie
DISCONTINUED PRODUCT
The TEW-452BRP (Version B1.1R) has been discontinued. It has been replaced by the TEW-829DRU (Version v1.0R). For a list of discontinued products, click here.Hilfsprogramme
Firmware
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Firmware Version: v4.01B0036
Release Date:5/2008
Release Note:
1. Download and unzip the firmware file
2. Go to router’s web configuration, load the *.bin file to upgrade the firmware
Dateiname: FW_TEW-452BRP(v4.01b0036).zip
SHA-1 Checksum: 5D6845189829FEA52D9B2890BBAFDA232954801F
Datum: 7/26/2017
Dateigröße: 813.36 KB
Dateiname:
Firmware_TEW-452BRP_B1_400b0034.ZIP
Description:
TEW-452BRP Wireless Router, Hardware (H/W) Version: B1.0R and B1.1R. Firmware Version: 4.00 Build 0034, 14 May, 2007.
Firmware File:
TEW-452BRP_B1_400b0034.bin
Release Note:
Updates from previous version: 4.00 Build: 0022
Firmware Upgrade Instructions:
Please download and unzip the firmware file to computer's local hard drive and then follow the instructions in the "readme.txt" file to upgrade the firmware.
Warning!
Firmware upgrade failure may permanently damage the unit and causing it not to function.If the issues in the "Release Note" do not address the problem you are experiencing, please do not upgrade the firmware.Never upgrade the firmware using a wireless connection.Firmware upgrade will reset the Router to factory default state (all current settings will be replaced by default settings). When necessary, please write down the Router's current settings before performing the firmware upgrade.Please do not load the previously saved Router "configuration file" to the new firmware.We apologize for the inconvenience.
If you need assistance performing the firmware upgrade or if you have any questions, please contact our Techsupport Team http://www.trendnet.com/support.
Firmware_TEW-452BRP_B1_400b0034.ZIP
Description:
TEW-452BRP Wireless Router, Hardware (H/W) Version: B1.0R and B1.1R. Firmware Version: 4.00 Build 0034, 14 May, 2007.
Firmware File:
TEW-452BRP_B1_400b0034.bin
Release Note:
Updates from previous version: 4.00 Build: 0022
- Updated Dynamic DNS (DDNS) Client.
- Increased "AP Mode" wireless signal stability.
- Added "DHCP Client" feature, when the Router is set to "Wireless AP" mode (also updated the "Setup Wizard" to reflect this when the Router is in "AP Mode").
- Added MPPE function
- add MSCHAP_SUPPORT,MPPE,CCP_SUPPORT,MSCHAPV2_SUPPORT in ipport.h and iniche.bld
- add mppe_enable in cfg.h
- add mppe enable and mppe length in UI page and language file
- add get_mppe_type function in htmlcgi.c and htmlcgi.h
- Fixed WPA Wireless Encryption bug.
- Updated "Ping Test" function under "Tool".
- Fixed Protocol Filter rule enable/disable function.
- Updated "Host Name" field to accept numbers and letters (upper and lower cases)
Firmware Upgrade Instructions:
Please download and unzip the firmware file to computer's local hard drive and then follow the instructions in the "readme.txt" file to upgrade the firmware.
Warning!
Firmware upgrade failure may permanently damage the unit and causing it not to function.If the issues in the "Release Note" do not address the problem you are experiencing, please do not upgrade the firmware.Never upgrade the firmware using a wireless connection.Firmware upgrade will reset the Router to factory default state (all current settings will be replaced by default settings). When necessary, please write down the Router's current settings before performing the firmware upgrade.Please do not load the previously saved Router "configuration file" to the new firmware.We apologize for the inconvenience.
If you need assistance performing the firmware upgrade or if you have any questions, please contact our Techsupport Team http://www.trendnet.com/support.
Dateiname: Firmware_Tew-452BRP_B1_400b0034.zip
SHA-1 Checksum: 2FF42BDCE2D4C3580E890934DB68109F23061B0B
Datum: 7/26/2017
Dateigröße: 811.24 KB
Datenblätter
Dateiname: EN_Spec_TEW-452BRP(b1.0r).pdf
Datum: 12/28/2007
Dateigröße: 466.28 KB
Dateiname: FR_Spec_TEW-452BRP(b1.0r).pdf
Datum: 1/8/2007
Dateigröße: 376.53 KB
Dateiname: GE_Spec_TEW-452BRP(b1.0r).pdf
Datum: 1/8/2007
Dateigröße: 379.47 KB
Dateiname: SP_Spec_TEW-452BRP(b1.0r).pdf
Datum: 1/8/2007
Dateigröße: 376.45 KB
Dateiname: RU_Spec_TEW-452BRP(b1.0r).pdf
Datum: 1/8/2007
Dateigröße: 1.44 MB
Kurzanleitung zur Installation
Dateiname: EN_QIG_TEW-452BRP(B1.1R).pdf
Datum: 12/28/2007
Dateigröße: 377.30 KB
Dateiname: FR_QIG_TEW-452BRP(B1.1R).pdf
Datum: 12/28/2007
Dateigröße: 381.95 KB
Dateiname: GE_QIG_TEW-452BRP(B1.1R).pdf
Datum: 12/28/2007
Dateigröße: 381.15 KB
Dateiname: PO_QIG_TEW-452BRP(B1.1R).pdf
Datum: 12/28/2007
Dateigröße: 586.20 KB
Dateiname: SP_QIG_TEW-452BRP(B1.1R).pdff
Datum: 12/28/2007
Dateigröße: 380.85 KB
Dateiname: RU_QIG_TEW-452BRP(B1.1R).pdf
Datum: 12/28/2007
Dateigröße: 997.07 KB
Dateiname: EST_QIG_TEW-452BRP(vb1.1).pdf
Datum: 1/24/2008
Dateigröße: 941.70 KB
Bedienungsanleitung
Dateiname: UG_TEW-452BRP(B1.1R).pdf
Datum: 1/17/2007
Dateigröße: 2.66 MB
Produktbild(er)
WPA(2)-PSK Example
Authentication type: WPA
PSK/EAP: PSK
Cipher Type: TKIP
Passphrase: 0123456789abcdef
Confirm passphrase: 0123456789abcdef
The key must be between 8~63 digits or 64 HEX characters.
Step 1 Log into the TEW-452BRP by entering its IP address into a browser. The def...
You can not disable SSID broadcast when Extended Range is disabled. Follow the steps below to disable Extended Range:
Step 1: Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. The default username is admin with a password of admin. They ...
Step 1 The TEW-452BRP is connected behind a modem router or another router. To verify this, log onto the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. The default username is admin with a password of admin. They are case sensitive.
Step 2 Click S...
The EasyGo setup will only work on a Windows PC. If you want to setup the router
from a non-Windows PC or if you receive an error message, follow the steps
below.
Step 1 Connect an Ethernet cable from your modem to the WAN port on the router.
Step 2 Connect a second Ethernet cable from your co...
Step 1: Click the Microsoft Windows icon and then click "Computer".
Step 2: Right click on the CD-ROM/DVD-ROM drive and click Open.
Step 3: Right click on autorun.exe and click Run as administrator.
Step 4: Follow the QIG step by step instructions.
...
Step 1: Keep the number of obstructions to a minimum. Each obstruction can reduce
the range of a wireless device. Position the wireless devices in a manner
that will minimize the amount of obstructions between them. In an indoor
environment try to position the wireless devices so that the sign...
Step 1: Make sure that you have one of the following wireless adapters: TEW-441PC,
TEW-443PI, TEW-444UB or TEW-445UB.
Step 2: Log into the router by entering its IP address into a browser. The
default IP address is https://192.168.1.1.
The default username is admin with a password of admin. T...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. The default username is admin with a password of admin. They are case sensitive.
Step 2 Click on "Wireless" on the left hand side then click on "Basic".
Step 3 Select "Enable" ...
First make sure you have the router physically connected properly. Connect the DSL modem via Ethernet to the WAN port of the TEW-452BRP. If you have any computers that need to be hard wired into the router you will connect them to one of the four LAN ports.
Make sure the connection from the modem...
Well Known Ports
Log into the router by entering its IP address into a browser. The default
IP address is https://192.168.1.1. At the login, enter your username (admin)
and password (admin).
Click on "Cancel" if the Setup Wizard comes up.
Click on "Access" on the left hand side.
...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin).
Step 2 Click "Status" on the left hand side then click on "Device Information".
...
Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin)....
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin).
Step 2 Click on "Main" on the left hand side then click on "LAN&DHCP Server".
Step 3 Enter in the new value...
The default IP address is https://192.168.1.1. The default username is (admin) and the default password is (admin)....
Go to our website and check for available firmware updates here.
https://www.TRENDnet.com/asp/download_manager/list_subcategory.asp?SUBTYPE_ID=1196
> Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Notes" do
not address ...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin).
Step 2 Click "Tools" on the left hand side then click on "Settings". Then click "Save".
...
Press and hold in the reset button on the back of the router for approximately 15 seconds while the power is on.
...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. The default username is admin with a password of admin.
Step 2 Click on "Main" on the left hand side then click on "Password".
...
Step 1 Log into the router by entering its IP address
into a browser. The default IP address is https://192.168.1.1.
At the login, enter your
username (admin) and password (admin).
Step 2 Click on "Wireless" on the left hand side then
click on "WEP" at the top of the page.
Step...
Make sure that you are using Internet Explorer and not an unsupported browser like Fire Fox.
Open your web browser and type the IP address of the TEW-452BRP in the address
bar. The default IP address is 192.168.1.1. At the login, enter your username
(admin) and password (admin).
Click on “Wireless” on the left
hand side and then click on “Basic” at th...
1) Open your web browser and type the IP address of the TEW-452BRP in the
address bar. The default IP address is 192.168.1.1. At the login, enter your
username (admin) and password (admin).
2) Click on “Wireless” on
the left hand side and then click on “Basic” a...
| Hardware | |
| Standards |
|
|---|---|
| WAN | 1 x 10/100 MBit/s Auto-MDIX-Port (Internet) |
| LAN | 4 x 10/100 MBit/s Auto-MDIX-Port |
| Verbindungsart | Dynamische IP, Statische (Feste) IP, PPPoE, PPTP, L2TP |
| Unterstützte Protokolle |
|
| LED-Anzeige | Stromversorgung, System, Link, ACT |
| Dual-Diversity-Antenne |
|
| Abmessungen (B x T x H) | 155 x 110 x 30 mm |
| Gewicht | 266g |
| Temperatur |
|
| Luftfeuchtigkeit | max. 95% (nicht kondensierend) |
| Netzteil | Externes Netzteil (5 V Gleichstrom, 2,5 A) |
| Zertifizierung | FCC & CE |
| Drahtlose Verbindung | |
| Frequenz | 2,412 bis 2,484 GHz (ISM-Band) |
| Modultechnik |
|
| Medienzugriffsprotokoll | CSMA/CA mit ACK |
| Sicherheit | 64/128-Bit WEP, WPA(EAP)/WPA-PSK, WPA2(EAP)/WPA2-PSK |
| Sendeleistung | 15 dBm ± 2dBm |
| Datenrate |
|
| Empfangsempfindlichkeit |
|
| Kanäle | 11 Kanäle (USA), 13 Kanäle (EU) |
 | |
PACKUNGSINHALT |
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
