Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Firmware Version: v1.00.11
Release Date: 10/2024
Note:
- Fixed time format
- Added default port for SNTP
- Allow "space" for system description
Dateiname: TEG-3102WS_fw_v1.00.11.zip
SHA-1 Checksum: D105D3D0186A3CF09067D4A6136BA8E54CE96D78
Datum: 10/11/2024
Dateigröße: 19.91 MB
Dateiname: EN_datasheet_TEG-3102WS_(v1.0R).pdf
Datum: 5/3/2023
Dateigröße: 1.29 MB
Dateiname: FR_datasheet_TEG-3102WS_(v1.0R).pdf
Datum: 5/3/2023
Dateigröße: 1.25 MB
Dateiname: GE_datasheet_TEG-3102WS_(v1.0R).pdf
Datum: 5/3/2023
Dateigröße: 1.15 MB
Dateiname: PO_datasheet_TEG-3102WS_(v1.0R).pdf
Datum: 5/3/2023
Dateigröße: 956.93 KB
Dateiname: SP_datasheet_TEG-3102WS_(v1.0R).pdf
Datum: 5/3/2023
Dateigröße: 878.67 KB
Dateiname: IT_datasheet_TEG-3102WS_(v1.0R).pdf
Datum: 5/3/2023
Dateigröße: 1.16 MB
Dateiname: EN_Non-PoE_Multi-Gig.pdf
Datum: 1/5/2023
Dateigröße: 3.48 MB
Dateiname: FR_Non-PoE_Multi-Gig.pdf
Datum: 1/5/2023
Dateigröße: 2.63 MB
Dateiname: GE_Non-PoE_Multi-Gig.pdf
Datum: 1/5/2023
Dateigröße: 2.62 MB
Dateiname: PT_Non-PoE_Multi-Gig.pdf
Datum: 1/5/2023
Dateigröße: 1.85 MB
Dateiname: SP_Non-PoE_Multi-Gig.pdf
Datum: 1/5/2023
Dateigröße: 1.87 MB
Dateiname: ITA_Non-PoE_Multi-Gig.pdf
Datum: 1/5/2023
Dateigröße: 1.82 MB
Dateiname: Multi-Gig_Web_Smart_Switch_Series_Users_ Guide_091024.pdf
Datum: 9/10/2024
Dateigröße: 4.25 MB
PNG Image
Dateigröße: : 3.17 MB
Datum: : 1/6/2023
PNG Image
Dateigröße: : 1.77 MB
Datum: : 1/6/2023
PNG Image
Dateigröße: : 1.74 MB
Datum: : 1/6/2023
A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
The TEG-3102WS supports jumbo frames up to 10KB.
To share an Internet connection you will need a Router. The TEG-3102WS can be utilized to expand the available ports on your existing Router or network....
You will need to be running Cat-5e or higher cabling for 2.5GBASE-T.
Please check your network adapter's specification and make sure that it supports 2.5 Gbps. Also, check if your network cable is Cat-5e or higher....
Only managed or web smart switches will have reset instruction. Unmanaged Switches are not configurable and do not have settings to reset. Your Switch will have a reset button. This button is typically recessed and located on the front or the back of the Switch. You will need a small pin or paper cl...
You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
Standards | - IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3ae
- IEEE 802.3az
- IEEE 802.3bz
|
---|
Geräteschnittstelle | - 8 x 2.5G Ports
- 2 x 10G SFP+ Slots
- LED-Anzeige
|
---|
Datenübertragungsrate | - Gigabit Ethernet: 2000 Mbit/s (Vollduplex)
- 2,5G-Ethernet: 5000Mbps (Vollduplex)
- SFP: 2000Mbps (Vollduplex)
- SFP+: 20Gbps (Vollduplex)
|
---|
Leistung | - Switch Fabric: 80 Gbps
- RAM Datenpuffer: 1,5 MB
- MAC Adresstabelle: 16 K Einträge
- Jumbo Frames: 10 KB
- HOL Blockiervermeidung
- Weiterleitungsrate: 178,6 Mpps (64-byte Paketgröße)
|
---|
Management | - CLI (Telnet / SSHv2) für Basisverwaltung
- HTTP/HTTPS (SSL v2/3 TLS) webbasiertes GUI
- SNMP v1, v2c, 3
- RMON v1
- Static Unicast MAC Address
- Stromsparfunktion 802.3az aktivieren/deaktivieren
- LLDP und LLDP-MED
- Virtueller Kabeldiagnostiktest
- IPv6: IPv6 Neighbor Discovery, IPv6 Statisch IP, DHCPv6, Auto-Konfiguration
- Duales Bild und Konfiguration
|
---|
MIB | - RMON MIB RFC 1271
- LLDP-MIB IEEE 802.1AB
- RFC 1213 MIB II
- RFC 1643 Ethernet intf MIB
- RFC 1493 Bridge-MIB
|
---|
Spanning Tree | - IEEE 802.1D STP (Spanning Tree Protokoll)
- IEEE 802.1w RSTP (Rapid Spanning Tree Protokoll)
- IEEE 802.1s MSTP (Multiple Spanning Tree Protokoll)
|
---|
Link Aggregation | - Static Link Aggregation
- 802.3ad Dynamic LACP
|
---|
Quality of Service (QoS) | - 802.1p Class of Service (CoS)
- DSCP (Differentiated Services Code Point)
- Bandbreitenkontrolle je Port
- Warteschlangenplanung: Strict Priority, Weighted Round Robin (WRR)
|
---|
VLAN ID | - 802.1Q Tagged VLAN
- Dynamic GVRP
- Bis zu 256 VLAN Gruppen, ID Bereich 1-4094
- Privates VLAN (geschützte Ports)
- Voice VLAN (10 benutzerdefinierte OUIs)
|
---|
Multicast | - IGMP Snooping v1, v2, v3
- MLD Snooping v1, v2
- IGMP Fast Leave
- Bis zu 256 Multicast-Einträge
|
---|
Port-Spiegelung | - RX, TX oder beides
- Many-to-one
|
---|
Zugriffskontrolle | - 802.1X Port-Based Network Access Control, RADIUS, TACACS+
- Lokale Einwahl-Client-Authentifizierung
- DHCP Snooping
- Loopback-Erkennung
- Trusted Host
- Denial of Service (DoS)
- IP MAC Port-Anbindung
- Blockieren unbekannter Multicast
|
---|
ACL IPv4 L2-L4 & IPv6 | - MAC-Adresse
- VLAN ID
- Ether Type (nur IPv4)
- IP Protocol 0-255
- TCP/UDP Port 1-65535
- 802.1p
- Nutzungsbedingungen (nur IPv4)
- IPv4-Adresse und -Maske (nur IPv4)
- IPv6-Adresse und Präfixlänge (nur IPv6)
|
---|
Layer 3 Features | - IPv4 / IPv6 statisches Routing
- IP-Schnittstellen: Bis zu 6
- Routingtabelleneinträge: Bis zu 32 (IPv4: 400 / IPv6: 100)
- ARP-Tabelle (bis zu 128 Einträge)
- Inter-VLAN Routing
|
---|
Stromversorgung | - Eingang: 100 – 240 V AC, 50/60 Hz, eingebautes Netzteil
- Max. Verbrauch: 152,3Watt
|
---|
Lüfter/Akustik | |
---|
MTBF | |
---|
Betriebstemperatur | - -0° – 40° C (32° – 104° F)
|
---|
Betriebsfeuchtigkeit | - Max. 95% nicht-kondensierend
|
---|
Maße | - 240 x 104 x 27mm (9.45 x 4,09 x 1,06 Zoll)
|
---|
Gewicht | |
---|
Zertifizierungen | |
---|
Garantie | |
---|
PACKUNGSINHALT |
- TEG-3102WS
- Schnellinstallationseinrichtung
- Netzadapter (12V 1.5A)
- Zubehör zum Rackmontieren
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
Nicht verfügbar in Europa