10/100 MBit/s Mini-Druck-Server mit 1 parallelen Druckeranschluss
TE100-P1P (Version 1.0)
DISCONTINUED PRODUCT
The TE100-P1P (Version 1.0) has been discontinued. For a list of discontinued products, click here.Hilfsprogramme
Firmware
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Dateiname: FW_TE100-P1P_V1(v.6034).zip
SHA-1 Checksum: FF9C1E4485555D098F7EF40DB3511A5FBB355C2C
Datum: 7/25/2017
Dateigröße: 417.34 KB
Datenblätter
Dateiname: Spec_TE100-P1P(English).pdf
Datum: 3/28/2005
Dateigröße: 201.17 KB
Dateiname: Spec_TE100-P1P(French).pdf
Datum: 3/28/2005
Dateigröße: 182.46 KB
Dateiname: Spec_TE100-P1P(German).pdf
Datum: 3/28/2005
Dateigröße: 204.22 KB
Dateiname: Spec_TE100-P1P(Portuguese).pdf
Datum: 3/28/2005
Dateigröße: 203.93 KB
Dateiname: Spec_TE100-P1P(Spanish).pdf
Datum: 3/28/2005
Dateigröße: 202.72 KB
Kurzanleitung zur Installation
Dateiname: QIG_TE100-P1P_P1U.pdf
Datum: 5/2/2013
Dateigröße: 546.78 KB
Dateiname: QIG_TE100-P1P_P1U-100903-FRANCAIS.pdf
Datum: 8/19/2004
Dateigröße: 567.63 KB
Bedienungsanleitung
Dateiname: UnixUG_TE100-P1P_P1U.pdf
Datum: 8/19/2004
Dateigröße: 716.32 KB
Frequently Asked Questions (FAQ)
Produktbild(er)
Print servers are IEEE1284 bi-directional compatible. This means that data can
be sent and received in both directions between the printer and the print server.
Toner status, paper level, etc., will not be communicated back to the PC.
In order to get printer status information, the proprietar...
The TE100-P1P's port name is P1 the TE100-P1U's port name is U1. They are case sensitive.
Yes, but you must assign the print server an IP address from a Windows based operating system first. Once that is done you can use LPR or LPD printing for the Macs and you can manage the print server by entering its IP address into a web browser. Also the printer must be a postscript printer....
Step 1 Go to Start>Settings>Printers>Add New Printer (WinXP - Start>Printers
and Faxes>Add a Printer).
Step 2 Select Local Printer. Make sure to uncheck Automatically
detect and install my plug and play printer. Click Next.
Step 3 Select Create a New Port and select Standard TCP/IP port. Cli...
In Windows 98/Me you will need to install the LPR client.
For Windows 98/ME you will also need to know the port name that you are printing
to (The Port Name is U1 for the TE100-P1U and P1 for the TE100-P1P).
Installing LPR:
Step 1 Once the file is downloaded and extracted, Go to Start > Se...
First, launch your web browser (such as the Internet Explorer 6.0 used in this
manual). Then, type https://192.168.0.1 (the default IP address) in the Address
bar and press [Enter] to enter the Management screen of the Configuration Utility.
Or use the IP address that you manually assigned t...
Step 1 Open up the PS-Utility and click on Change IP Address.
Step 2 Change IP Address:
Click this button to bring up the following dialog box, allowing you to change
the IP Address. In this dialog box you can select either Manually Assign
or DHCP Assign Automatically. When completed click ...
If you are using Windows XP you will have to disable the built in firewall. But for all operating systems you have to disable any other form of firewall software such as Norton Internet Security, Black Ice, and ZoneAlarm....
| Hardware | |
| LAN-Standards: |
|
|---|---|
| LAN-Port: |
|
| Druckerschnittstelle: |
|
| Netzwerkkabel: |
|
| Unterstützte Protokolle: |
|
| LED-Anzeige: |
|
| Stromversorgung: |
|
| Abmessungen (BxTxH): |
|
| Gewicht: |
|
| Temperatur: |
|
| Luftfeuchtigkeit: |
|
| Zertifizierungen: |
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
