Drahtloser 54 MBit/s 802.11g Firewall-Router
TEW-432BRP (Version C1.xR)
- Proven wireless g performance and reliability
- Stream videos, download files and play games
- Create a network in minutes with Easy-Go installation
- Advanced firewall and wireless encryption ensures data security
DISCONTINUED PRODUCT
The TEW-432BRP (Version C1.xR) has been discontinued. It has been replaced by the TEW-831DR (Version v1.0R). For a list of discontinued products, click here.Hilfsprogramme
Dateiname: EasyGoSetupCD_TEW-432BRP_C1.0R.zip
SHA-1 Checksum: 29857639CA8E03B09D15D1E17AA31162CDD53A91
Datum: 3/29/2021
Dateigröße: 52.73 MB
Firmware
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Firmware Version: v2.00 build 19
Release Date: March 2008
Note: Fix MTU bug
Dateiname: FW_TEW-432BRPC(v2.00.19).zip
SHA-1 Checksum: 3A36383FF672974FC720FF312014A8B56359FF88
Datum: 7/26/2017
Dateigröße: 978.09 KB
Datenblätter
Dateiname: EN_Spec_TEW-432BRP(C1.0).pdf
Datum: 1/17/2007
Dateigröße: 375.36 KB
Dateiname: FR_Spec_TEW-432BRP(C1.0).pdf
Datum: 1/17/2007
Dateigröße: 380.16 KB
Dateiname: GE_Spec_TEW-432BRP(C1.0).pdf
Datum: 1/17/2007
Dateigröße: 379.60 KB
Dateiname: SP_Spec_TEW-432BRP(C1.0).pdf
Datum: 1/17/2007
Dateigröße: 379.69 KB
Dateiname: RU_Spec_TEW-432BRP(C1.0).pdf
Datum: 1/17/2007
Dateigröße: 1.41 MB
Kurzanleitung zur Installation
Dateiname: EN_QIG_TEW-432BRP(C1.0R).pdf
Datum: 4/30/2007
Dateigröße: 384.69 KB
Dateiname: FR_QIG_TEW-432BRP(C1.0R).pdf
Datum: 4/30/2007
Dateigröße: 387.80 KB
Dateiname: GE_QIG_TEW-432BRP(C1.0R).pdf
Datum: 4/30/2007
Dateigröße: 387.00 KB
Dateiname: PO_QIG_TEW-432BRP(C1.0R).pdf
Datum: 9/4/2007
Dateigröße: 523.49 KB
Dateiname: SP_QIG_TEW-432BRP(C1.0R).pdf
Datum: 11/16/2007
Dateigröße: 387.04 KB
Dateiname: RU_QIG_TEW-432BRP(C1.0R).pdf
Datum: 4/30/2007
Dateigröße: 1,003.56 KB
Dateiname: EST_QIG_TEW-432BRP(C1.0R).pdf
Datum: 5/4/2007
Dateigröße: 790.75 KB
Dateiname: POL_QIG_TEW-432BRP.pdf
Datum: 7/24/2007
Dateigröße: 401.59 KB
Dateiname: RO_QIG_TEW-432BRP(C1.0R).pdf
Datum: 10/3/2007
Dateigröße: 532.39 KB
Dateiname: HE_QIG_TEW-432BRP_C1.0R.pdf
Datum: 2/9/2007
Dateigröße: 1.15 MB
Bedienungsanleitung
Dateiname: UG_TEW-432BRP(C1.0R).pdf
Datum: 1/9/2007
Dateigröße: 4.11 MB
Produktbild(er)
Step 1 The TEW-432BRP is connected behind a modem router or another router. To verify this, log onto the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin. They are case sensitive. Step 2 Click...
The EasyGo setup will only work on a Windows PC. If you want to setup the router from a non-Windows PC, follow the steps below.
Step 1 Connect an Ethernet cable from your modem to the WAN port on the router.
Step 2 Connect a second Ethernet cable from your computer to one of the 4
LAN port...
Step 1 Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. In an indoor environment try to position the wireless devices so that the signal pass...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin.
Step 2 Click on "Main" on the left hand side then click on "LAN&DHCP Server".
Step 3 Click on "Disable" on the "D...
Make sure that you are using Internet Explorer and not an unsupported browser like Fire Fox. You can also clear the cache in your browser to ensure you are not looking at a cached image of the web page....
First make sure you have the router physically connected properly. Connect the DSL modem via Ethernet to the WAN port of the TEW-432BRP. If you have any computers that need to be hard wired into the router you will connect them to one of the four LAN ports.
Make sure the connection from the modem...
For Well Known Ports
Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).
Click on "Cancel" if the Setup Wizard comes up.
Click on "Access" on the left hand side.
...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).Step 2 Click on "Wireless" on the left hand side then click on "Security" below wireless. Next select "Security" from t...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin)....
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).
Step 2 Click on "Main" on the left hand side then click on "LAN&DHCP Server".
Step 3 Enter in the new va...
> Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Notes" do
not address the problem you are experiencing with the router, please do not upgrade
the firmware. Do not perform the upgrade if the router's firmware is newer than
th...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin.
Step 2 Click "Tools" on the left hand side then click on "Settings".
...
Press and hold in the reset button on the back of the router for approximately 15 seconds while the power is on....
Step 1 Log into the router by entering it's IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin).
Step 2 Click "Status" on the left hand side then click on "Device Information".
...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin).
Step 2 Click on "Wireless" on the left hand side then click on "WEP".
Step 3 Enter in the desired encryption...
The default IP address is https://192.168.1.1. The default username is (admin) and the default password is (admin)....
First make sure you have the router physically connected properly. Connect the
DSL modem via Ethernet to the WAN port of the TEW-432BRP. If you have any computers
that need to be hard wired into the router you will connect them to one of the
four LAN ports.
Make sure the connection from the...
| Hardware | |
| Standards |
|
|---|---|
| WAN |
|
| LAN |
|
| Verbindungsart |
|
| Unterstützte Netzwerkprotokolle |
|
| LED-Anzeige |
|
| Abmessungen (L x B x H) |
|
| Gewicht |
|
| Temperatur |
|
| Luftfeuchtigkeit |
|
| Netzteil |
|
| Zertifizierung |
|
| Drahtlose Verbindung | |
| Frequenzbereich |
|
| Modultechnik |
|
| Antenne |
|
| Medienzugriffsprotokoll |
|
| Sicherheit |
|
| Sendeleistung |
|
| Datenrate |
|
| Empfangsempfindlichkeit |
|
| Kanäle |
|
PACKUNGSINHALT |
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
