Drahtloser 54 MBit/s 802.11g Firewall-Router

TEW-432BRP   (Version B1.xR)

  • Proven wireless g performance and reliability
  • Stream videos, download files and play games
  • Create a network in minutes with Easy-Go installation
  • Advanced firewall and wireless encryption ensures data security

DISCONTINUED PRODUCT

The TEW-432BRP (Version B1.xR) has been discontinued. It has been replaced by the TEW-831DR (Version v1.0R). For a list of discontinued products, click here.

Hilfsprogramme

Dateiname: TEW-432BRP_EASY_GO.zip
SHA-1 Checksum: 97D85B181DD8D4CE21EE7FD4C1D614F5C055B3E6
Datum: 3/29/2021
Dateigröße: 36.26 MB

Firmware

Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung.
Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch.

Upload Procedures:

  1. Download the firmware file, unzip and save it to your local disk
  2. Go to TEW-432BRP’s web browser configuration page firmware upload section
  3. Select the downloaded file to upgrade

Note:
For Hardware B1/B1.1R unit, please update to firmware version 1.2.0.0015 first then update to firmware version 1.2.0.0019.

For Hardware B2.0R/B2.1R unit, firmware 1.2.0.0019 can be downloaded and upgraded directly.
Dateiname: Firmware_TEW-432BRP(1.2.0.0019).zip
SHA-1 Checksum: 30FC04D419D9ACC6ACBD6332367E1DFC96632AD9
Datum: 7/26/2017
Dateigröße: 611.97 KB
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung.
Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch.

Upload Procedures:

  1. Download the firmware file, unzip and save it to your local disk
  2. Go to TEW-432BRP’s web browser configuration page firmware upload section
  3. Select the downloaded file to upgrade

Dateiname: Firmware_TEW-432BRP(1.2.0.0015).zip
SHA-1 Checksum: 2CD5089B99555671940A59A840ADB481771CF422
Datum: 7/26/2017
Dateigröße: 600.74 KB

Datenblätter

Dateiname: EN_Spec_TEW-432BRP(bx).pdf
Datum: 1/25/2007
Dateigröße: 468.02 KB
Dateiname: FR_Spec_TEW-432BRP(bx).pdf
Datum: 1/25/2007
Dateigröße: 435.83 KB
Dateiname: GE_Spec_TEW-432BRP(bx).pdf
Datum: 1/25/2007
Dateigröße: 435.17 KB
Dateiname: SP_Spec_TEW-432BRP(bx).pdf
Datum: 1/25/2007
Dateigröße: 435.19 KB
Dateiname: RU_Spec_TEW-432BRP(bx).pdf
Datum: 1/25/2007
Dateigröße: 1.45 MB

Kurzanleitung zur Installation

Dateiname: EN_QIG_TEW-432BRP_Bx.pdf
Datum: 1/20/2007
Dateigröße: 505.90 KB
Dateiname: FR_QIG_TEW-432BRP_Bx.pdf
Datum: 1/20/2007
Dateigröße: 508.70 KB
Dateiname: GE_QIG_TEW-432BRP_Bx.pdf
Datum: 1/20/2007
Dateigröße: 507.51 KB
Dateiname: PO_QIG_TEW-432BRP.pdf
Datum: 1/20/2007
Dateigröße: 321.78 KB
Dateiname: SP_QIG_TEW-432BRP_Bx.
Datum: 1/20/2007
Dateigröße: 508.65 KB
Dateiname: RU_QIG_TEW-432BRP_Bx.pdf
Datum: 1/20/2007
Dateigröße: 566.09 KB
Dateiname: EST_QIG_TEW-432BRP.pdf
Datum: 1/20/2007
Dateigröße: 318.47 KB
Dateiname: POL_QIG_TEW-432BRP.pdf
Datum: 7/24/2007
Dateigröße: 401.59 KB
Dateiname: RO_QIG_TEW-432BRP_Bx.pdf
Datum: 1/20/2007
Dateigröße: 501.51 KB
Dateiname: CN_QIG_TEW-432BRP.pdf
Datum: 5/16/2013
Dateigröße: 925.06 KB

Bedienungsanleitung

Dateiname: UG_TEW-432BRP(Bx).pdf
Datum: 1/20/2007
Dateigröße: 4.79 MB

Frequently Asked Questions (FAQ)

FAQ
Dateiname: FAQ_TEW-432BRP_(bx).zip
Datum: 1/20/2007
Dateigröße: 876.46 KB

Produktbild(er)

JPEG Image
Dateigröße: : 558.11 KB
Datum: : 7/28/2006
TIFF Image
Dateigröße: : 3.53 MB
Datum: : 7/11/2006
JPEG Image
Dateigröße: : 430.08 KB
Datum: : 7/11/2006
TIFF Image
Dateigröße: : 3.34 MB
Datum: : 7/11/2006
JPEG Image
Dateigröße: : 444.87 KB
Datum: : 7/11/2006
TIFF Image
Dateigröße: : 3.57 MB
Datum: : 7/11/2006
ROHS compliant WEEE crossed-out bin symbol.
Step 1 The TEW-432BRP is connected behind a modem router or another router. To verify this, log onto the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin. They are case sensitive. Step 2 Click...
The EasyGo setup will only work on a Windows PC.  If you want to setup the router from a non-Windows PC, follow the steps below. Step 1 Connect an Ethernet cable from your modem to the WAN port on the router. Step 2 Connect a second Ethernet cable from your computer to one of the 4 LAN port...
Step 1 Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. In an indoor environment try to position the wireless devices so that the signal pass...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin. Step 2 Click on "Main" on the left hand side then click on "LAN&DHCP Server". Step 3 Click on "Disable" on the "D...
Make sure that you are using Internet Explorer and not an unsupported browser like Fire Fox. You can also clear the cache in your browser to ensure you are not looking at a cached image of the web page....
First make sure you have the router physically connected properly. Connect the DSL modem via Ethernet to the WAN port of the TEW-432BRP. If you have any computers that need to be hard wired into the router you will connect them to one of the four LAN ports. Make sure the connection from the modem...
For Well Known Ports Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin). Click on "Cancel" if the Setup Wizard comes up. Click on "Access" on the left hand side. ...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).Step 2 Click on "Wireless" on the left hand side then click on "Security" below wireless. Next select "Security" from t...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin)....
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin). Step 2 Click on "Main" on the left hand side then click on "LAN&DHCP Server". Step 3 Enter in the new va...
> Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Notes" do not address the problem you are experiencing with the router, please do not upgrade the firmware. Do not perform the upgrade if the router's firmware is newer than th...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin. Step 2 Click "Tools" on the left hand side then click on "Settings". ...
Press and hold in the reset button on the back of the router for approximately 15 seconds while the power is on....
Step 1 Log into the router by entering it's IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin). Step 2 Click "Status" on the left hand side then click on "Device Information". ...
Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin). Step 2 Click on "Wireless" on the left hand side then click on "WEP". Step 3 Enter in the desired encryption...
The default IP address is https://192.168.1.1. The default username is (admin) and the default password is (admin)....
First make sure you have the router physically connected properly. Connect the DSL modem via Ethernet to the WAN port of the TEW-432BRP. If you have any computers that need to be hard wired into the router you will connect them to one of the four LAN ports. Make sure the connection from the...
Hardware
Standards
  • Verdrahtet: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX), ANSI/IEEE 802.3 Auto-Negotiation
  • Drahtlos: IEEE 802.11b (11 MBit/s), IEEE 802.11g (54 MBit/s)
WAN
  • 1 x 10/100 MBit/s Auto-MDIX-Port (Internet)
LAN
  • 4 x 10/100 MBit/s Auto-MDIX-Port
Verbindungsart
  • Dynamische IP, Statische (Feste) IP, PPPoE, PPTP
Unterstützte Netzwerkprotokolle
  • TCP/IP, NAT, PPPoE/PPTP, HTTP, DHCP Server/Client
LED-Anzeigen
  • System, WAN, WLAN, LAN
Abmessungen (L x B x H)
  • 155 x 110 x 30 mm
Gewicht
  • 226 g
Temperatur
  • Betrieb: 0 °C bis 40 °C
  • Lagerung: -10° bis 70 °C
Luftfeuchtigkeit
  • max. 95% (nicht kondensierend)
Netzteil
  • Externes Netzteil (5 V Gleichstrom, 2,5 A)
Zertifizierung
  • FCC & CE
Drahtlose Verbindung
Frequenzbereich
  • 2,412 - 2,484 GHz (ISM-Band)
Modultechnik
  • 802.11b: CCK (11 und 5,5 MBit/s), DQPSK (2 MBit/s), DBPSK (1 MBit/s)
  • 802.11g: OFDM
Antenne
  • 1 abnehmbare externe 2dBi-Dipolantenne (mit Reverse-SMA-Buchse)
Medienzugriffsprotokoll
  • CSMA/CA mit ACK
Sicherheit
  • 64/128-Bit WEP, 802.1X/ WPA, WPA-PSK, MAC-Adressenfilter, Protokollfilter
Sendeleistung
  • 13 dBm (normal)
Datenraten
  • 802.11b: 11 MBit/s, 5,5 MBit/s, 2 MBit/s, 1 MBit/s
  • 802.11g: 54 MBit/s, 48 MBit/s, 36 MBit/s, 24 MBit/s, 18 MBit/s, 12 MBit/s, 9 MBit/s und 6 MBit/s
Empfangsempfindlichkeit
  • 11 MBit/s 8 % PER bei -85 dBm (normal)
  • 54 MBit/s 10% PER bei -70 dBm (normal)
Kanäle
  • 11 Kanäle (USA), 13 Kanäle (EU)

PACKUNGSINHALT

  • TEW-432BRP
  • Mehrsprachige Installationsanleitung
  • CD mit Bedienungsanleitung
  • Netzteil (5 V, 2,5 A)
  • RJ-45-Kabel (1,5 m)

Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.