300 MBit/s Dualband Wireless-N Breitband-Router
TEW-672GR (Version V1.0R)
- Wireless-N-Standard erhöht Reichweite und Geschwindigkeit der drahtlosen Verbindung
- Hochauflösende Videos empfangen, Dateien herunterladen, Spiele spielen und gleichzeitig im Internet surfen
- 14-fache Geschwindigkeit und 6-fache Reichweite eines Wireless-G-Netzwerks*
- WiFi-geschützte Installation und manueller Ein-/Ausschalter für die drahtlose Verbindung
DISCONTINUED PRODUCT
The TEW-672GR (Version V1.0R) has been discontinued. It has been replaced by the TEW-829DRU (Version v1.0R). For a list of discontinued products, click here.Firmware
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Firmware: 1.0.9.161
Release Date: 01/2010
Note:
- Corrected "remote management always enabled" issue.
- Fixed schedule related issues.
- Resolved unnecessary packet broadcasting.
Dateiname: FW_TEW-639GR_672GR(v1.0.9.161).zip
SHA-1 Checksum: 30E09C14300DF8E3FB5A0C87742438A9B39AEEF4
Datum: 7/28/2017
Dateigröße: 2.72 MB
Datenblätter
Dateiname: EN_Spec_TEW-672GR(v1_0R)_060710.pdf
Datum: 6/27/2012
Dateigröße: 786.81 KB
Dateiname: FR_Spec_TEW-672GR(v1_0R)_060710.pdf
Datum: 6/27/2012
Dateigröße: 796.01 KB
Dateiname: GE_Spec_TEW-672GR(v1_0R)_060710.pdf
Datum: 6/27/2012
Dateigröße: 796.94 KB
Dateiname: SP_Spec_TEW-672GR(v1_0R)_060710.pdf
Datum: 6/27/2012
Dateigröße: 799.82 KB
Dateiname: RU_Spec_TEW-672GR(v1_0R)_060710.pdf
Datum: 6/27/2012
Dateigröße: 831.97 KB
Dateiname: IT_Spec_TEW-672GR(v1_0R)_060710.pdf
Datum: 6/27/2012
Dateigröße: 802.71 KB
Kurzanleitung zur Installation
Dateiname: EN_QIG_TEW-672GR(V1).pdf
Datum: 2/4/2009
Dateigröße: 586.92 KB
Dateiname: FR_QIG_TEW-672GR(V1).pdf
Datum: 2/4/2009
Dateigröße: 584.47 KB
Dateiname: GE_QIG_TEW-672GR(V1.0R).pdf
Datum: 2/4/2009
Dateigröße: 656.69 KB
Dateiname: PO_QIG_TEW-672GR(V1).pdf
Datum: 2/4/2009
Dateigröße: 577.91 KB
Dateiname: SP_QIG_TEW-672GR(V1).pdf
Datum: 2/4/2009
Dateigröße: 586.80 KB
Dateiname: RU_QIG_TEW-672GR(V1).pdf
Datum: 2/4/2009
Dateigröße: 1.26 MB
Dateiname: EST_QIG_TEW-672GR(V1).pdf
Datum: 2/4/2009
Dateigröße: 585.94 KB
Bedienungsanleitung
Dateiname: UG_TEW-672GR.pdf
Datum: 10/3/2008
Dateigröße: 2.58 MB
Produktbild(er)
Press and hold in the reset button on the back of the router for approximately 15 seconds while the power is on.
The default values are as follows.
IP Address: 192.168.10.1
Username: admin
Password: Leave blank
SSID: TRENDnet672
Encryption: none
...
Login to the TEW-672GR by entering https://192.168.10.1 into the address line of your browser.
The default User Name is "admin", without the quotes. There is no password by default. Click "Login"
Click Advanced on the left hand side and then click Virtual Server. The example shown fo...
The default username is "admin", without the quotes. There is no password by default.
Login to the TEW-672GR by entering https://192.168.10.1 into the address line of your browser.
The default User Name is "admin", without the quotes. There is no password by default. Click "Login"
...
Login to the TEW-672GR by entering https://192.168.10.1 into the address line of your browser.
The default User Name is "admin", without the quotes. There is no password by default. Click "OK"
Click Wireless and then Basic. You can define the wireless network parameters here.
...
Login to the TEW-672GR by entering https://192.168.10.1 into the address line of your browser.
The default User Name is "admin", without the quotes. There is no password by default. Click "OK"
Click on Wireless and then Security. Select the highest form of security supported by your wi...
Yes, the TEW-672GR will maintain 802.11n mode with WDS links.
In dual-band wireless devices, in which wireless Routers/Access Point and Adapters are compatible with both 2.4GHz and 5GHz frequencies in one device....
The TEW-672GR will only support one frequency at a time. You must select a wireless mode to be used, select wireless a or wireless n. ...
The TEW-672GR has two built in wireless radios for each of the two frequencies the Router supports (802.11a –5GHz and 802.11b/g/n –2.4GHz)....
To configure the TEW-672GR for either 802.11a or 802.11b/g/n, simply access the setup page of the TEW-672GR and look for the Wireless button on the left side. Look for Wireless mode and select the mode you want your TEW-672GR to operate in. Apply the setting at the bottom of the window. ...
Depending on the type of wireless adapter you are using, you should see the wireless network that your adapter will support. If the wireless adapter is an 802.11 b/g/n, you will see all 2.4GHz wireless networks (802.11 b/g/n). If your wireless adapter is an 802.11a, then you will see all 5GHz wirele...
Yes, the TEW-672GR is fully compatible with existing 802.11a wireless devices.
Yes, as long as the 3rd party manufactures dual band wireless adapters support 802.11a/b/g/n, it should work without any issue.
(Note: Please refer to 3rd party manufacture for correct setup of any non-TRENDnet wireless device(s))....
The TEW-672GR supports the following security for wireless network, WEP, WPA/WPA2, WPA/WPA2 Enterprise, Wireless MAC filtering, and WiFi Protected Setup (WPS)....
Yes, the TEW-672GR allows you to create up to three additional virtual SSIDs (Wireless Network Name) to connect with. Multiple Service Set Identifiers (SSID) allow the ability to create virtual wireless networks while only using one wireless Router/Access Point device as the main connecting point. C...
Yes, the TEW-672GR is fully compatible with WDS; you can add additional Access Point(s) to extend your coverage of your wireless network. This feature works with the TEW-637AP. (Note: WDS only supports wireless g speed. The use of multiple Access Points will reduces the overall network throughput to...
DHCP Reservation is used to assign a fixed IP Address to a device that always requires the same IP Address every time it is in use. This feature can be used for a print server, IP Camera, Network storage device as well as a computer. To setup DHCP Reservation, click on the Network button and select ...
This unique wireless mode allows both 2.4GHz and 5GHz to operate as one special channel range. This feature will automatically select the best channel to use in your wireless environment....
No, the Internet side of the TEW-672GR works independently from the wireless side the Router. Your Internet Service Provider controls your Internet speed. ...
802.11b/g mixed mode (2.4GHz) - This wireless mode works in the 2.4GHz frequency range and will allow both wireless b (11Mbps) and wireless g (54Mbps) clients to connect and access the TEW-672GR and share access at the same time. Although the wireless b/g operates in the 2.4GHz frequency, this mod...
I am not getting that many bars on my wireless signal, what can I do to improve the wireless signal?
When using the TEW-672GR from time to time you may experience issues with wireless signal loss or no signal, this is due to environmental conditions in and out of any structure or objects in the way. Since wireless is based on line of sight. The wireless signals do not pass through objects, walls or...
No, only wireless dual band or wireless 802.11a adapters will be able to see the wireless network that is operating in the wireless a/n mode. Even with the mode being mixed both wireless a and wireless n, the mode actually still works in the 5GHz frequency range. This frequency will exclude any 2.4G...
No, no software or utility is required to allow this product to work. The TEW-672GR is completely ready to use out of the box (Note: please refer to Quick Installation Guide that is included with this product)....
The TEW-672GR can support up to 32 wireless client connections per one Router/ Access Point.
| Hardware | |
| Standards | Technische Spezifikationen: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX) und IEEE 802.3ab (1000BaseT) Drahtlos: IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
|---|---|
| WAN | 1 x 10/100/1000 MBit/s Auto-MDIX-Port (Internet) |
| LAN | 4 x 10/100/1000 MBit/s Auto-MDIX port |
| Ein-/Ausschalter für drahtlose Verbindung | Ein-/Ausschalten des drahtlosen LAN |
| WPS Button | WiFi-geschützte Installation (WPS) mit anderen WPS-Geräten |
| Connection Type | Dynamische IP, statische (feste) IP, PPPoE, PPTP, L2TP |
| NAT-Firewall | 3.000 konfigurierbare NAT-Einträge, NAPT eingeschränkt |
| SPI-Firewall | Bis zu 24 Regeln, Schutz gegen Angriffe aus dem Internet – auf mehr als 2.000 Angriffe überprüft |
| WDS | Aktivierung/Deaktivierung der Unterstützung für Wireless Distribution System |
| UPnP | Kompatibel mit UPnP IGD 1.0 |
| DMZ | DMZ-Host, 24 konfigurierbare virtuelle Server & Game-Server |
| DNS | Statische oder im WAN zugewiesene DNS-Server, 10 überprüfte Services für DDNS |
| Internet-Zugriffskontrolle | Regelbasierte Kindersicherungen, zeitbasierter Internetzugriff, Portbereich/Service-Filterung, Dynamische URL-Filterung, Beschränkung von Internet-Domänen, 32 benutzerdefinierte Zeitpläne, 24 Einträge für MAC-Adressenfilter |
| Logging | 3 Arten & 3 Stufen der Ereignisprotokollierung, bis zu 1000 Einträge E-Mail-Benachrichtigungen |
| LED-Anzeigen | Stromversorgung, LAN1~LAN4, WAN, und WLAN |
| Schaltnetzteil | 12V DC, 1A Externes Netzteil |
| Stromverbrauch | 779mA |
| Abmessungen (B x T x H) | 180 x 122 x 30 mm (6.8 x 4.6 x 1.1 inches) |
| Gewicht | 350g (0.8 lb) |
| Temperatur | Betrieb: 0°~ 40°C (32°F~ 104°F); Lagerung: -20°~ 60°C (-4°F~140 °F) |
| Luftfeuchtigkeit | Max. 90% (nicht kondensierend) |
| Zulassungen | CE, FCC |
| Wireless | |
Grenzfrequenz | 2.412 ~ 2.462 GHz (FCC); 2.412 ~ 2.472 GHz (ETSI) |
Antenna | 3 feste 2dBi-Dipolantennen |
Medienzugriffsprotokoll | CSMA/CA mit ACK |
| Modultechnik | 802.11n: BPSK, QPSK, 16QAM, mit OFDM |
Data Rate | 802.11a: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps und 6Mbps |
| Sicherheit | Verschlüsselung: Hardware AES/TKIP AES/TKIP, 64/128-bit WEP (HEX/ passphrase, 11a/b/g/n) 802.1X/EAP: EAP-TLE, EAP-TTLE/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC WPA: WPA/WPA2, WPA-PSK/WPA2-PSK (AES-11b/g/n, TKIP-11b/g) WPS: supporte la PIN und PBC SSID-Broadcaststeuerung |
| Ausgangsleistung | 802.11a: 14dBm (normal) 802.11b: 18dBm (normal) 802.11g: 15dBm (normal) 802.11n: 11dBm (normal) mit HT20 oder HT40 |
Empfangsempfindlichkeit | 802.11a: -72dBm (normal) @ 54Mbps |
Kanäle | 2.4GHz 1~ 11 (US), 1~13 (EU) 5GHz 36, 40, 44, 48, 149, 153, 157, 161, und 165 |
 | |
PACKUNGSINHALT |
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
