Einfacher Multifunktions-Druckserver
TE100-MP1UN (Version V1.0R)
- Verwandelt eigenständige Multifunktionsdrucker/Scanner/Faxgeräte in eine gemeinsam genutzte Netzwerkressource
- Drucken, Scannen und Faxen in hoher USB-Geschwindigkeit von jedem vernetzten Computer aus
- Mit den meisten Windows-Betriebssystemen kompatibel
- Lässt sich über Betriebsprogramm oder Webbrowser ansteuern
DISCONTINUED PRODUCT
The TE100-MP1UN (Version V1.0R) has been discontinued. For a list of discontinued products, click here.Hilfsprogramme
Firmware
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Firmware Version: v1.00
Release Date: 11/2008
Notes: First Release
Dateiname: FW_TE100-MP1UN.zip
SHA-1 Checksum: 7D2026120D4570441DFDE9D1E134BDB478B8BC7E
Datum: 7/25/2017
Dateigröße: 1.88 MB
Datenblätter
Dateiname: EN_Spec_TE100-MP1UN(v1.0R).pdf
Datum: 3/18/2013
Dateigröße: 256.58 KB
Dateiname: FR_Spec_TE100-MP1UN(v1.0R).pdf
Datum: 3/18/2013
Dateigröße: 262.47 KB
Dateiname: GE_Spec_TE100-MP1UN(v1.0R).pdf
Datum: 3/18/2013
Dateigröße: 361.38 KB
Dateiname: SP_Spec_TE100-MP1UN(v1.0R).pdf
Datum: 3/18/2013
Dateigröße: 301.51 KB
Dateiname: RU_Spec_TE100-MP1UN(v1.0R).pdf
Datum: 3/18/2013
Dateigröße: 829.46 KB
Kurzanleitung zur Installation
Dateiname: EN_Web_TE100-MP1UN(V1).pdf
Datum: 8/17/2010
Dateigröße: 570.56 KB
Dateiname: FR_Web_TE100-MP1UN(V1).pdf
Datum: 8/17/2010
Dateigröße: 1.43 MB
Dateiname: GE_Web_TE100-MP1UN(V1).pdf
Datum: 8/17/2010
Dateigröße: 1.41 MB
Dateiname: PO_Web_TE100-MP1UN(V1).pdf
Datum: 8/17/2010
Dateigröße: 1.36 MB
Dateiname: SP_QIG_TE100-MP1UN.pdf
Datum: 9/24/2010
Dateigröße: 867.62 KB
Dateiname: RU_Web_TE100-MP1UN(V1).pdf
Datum: 8/17/2010
Dateigröße: 2.29 MB
Dateiname: EST_QIG_TE100-MP1UN.pdf
Datum: 11/11/2008
Dateigröße: 874.19 KB
Bedienungsanleitung
Dateiname: UG_TE100-MP1UN(v1).pdf
Datum: 8/17/2010
Dateigröße: 1.41 MB
Produktbild(er)
Yes the TE100-MP1UN provides a web management interface. From the web interface you can see the server status (Hardware ID, Firmware Version, MAC Address, etc.), printer status, and the ability to configure the print server IP and device name....
The TE100-MP1UN is not a wireless device. However, if the print server is connected to a network that has a wireless router/access point, your wireless computers can communicate with the TE100-MP1UN. If the network is wired, a wireless laptop/computer will not have access to the network and the prin...
No. The TE100-MP1UN is only compatible with computers running a Windows operating system.
Option 1 is to log into your router and determine the IP Address that was assigned to the print server. Option 2 is to insert the Utility CD provided with the TE100-MP1UN into the CD-ROM drive and follow the Setup Wizard. Be sure to write down the IP Address given at the end of the wizard for future...
If someone else is printing they will automatically connect to the print server and then be immediately disconnected when the printing is finished so that others could print. If someone is using the printer to fax or scan the user will need to manually connect to the print server and they will be th...
The TE100-MP1UN is compatible with GDI, host-based, or multi-function printers. We do not have a compatibility list available at this time. In most cases, TE100-MP1UN will support your printer. TE100-MP1UN utilizes a technology called network USB, it will capture any USB printer connected to the TE1...
The "N" does not represent that it part of the 802.11n technology. The TE100-MP1UN is not a wireless print server. The "N" indicates that it is a new print server, which replaces the TE100-MP1U. ...
Standard print servers are not compatible with GDI, host-based, or multi-function printers. The TE100-MP1UN (multi-function print server) is compatible with most printers since it does support printers that are GDI, Host-Based, or Multi-Function. In addition, the 2-port USB print servers (TE100-MP2U...
The USB connection on the TE100-MP1UN is only compatible with USB printers. It will not support any other USB devices. If you require an extra USB port that is also compatible with USB-based external storage devices, TE100-MP2U is recommended....
The TE100-MP1UN is compatible with Windows 2000 (32-bit), XP (32-Bit), 2003 Server (32-bit) and Vista (32-Bit)....
Install the print drivers onto the computer that you want to print to it.
Insert the Utility CD
Run the Setup Wizard
Follow Setup Wizard instructions for USB connections, power, and Ethernet connections
After all cables and LEDs are working properly click on the print server
Configure t...
The TE100-MP1UN Utility will need to be installed on every computer that will be printing to the printer connected to the TE100-MP1UN. The printer driver will also need to be installed on every computer that will be printing to that printer....
No. The TE100-MP1UN is strictly for sharing a USB printer on your network. It cannot share an external storage device within the network for all to access. You can however go with the TE100-MP2U which does support NAS devices....
No. The TE100-MP1UN cannot connect to a hub to add more ports; it will not recognize the device. Only 1 USB printer is supported. If you have 2 USB printers you want to share on the network, we recommend the TE100-MP2U....
| Hardware | |
| Standards |
|
|---|---|
| Druckerschnittstelle |
|
| LAN Port |
|
| LED-Anzeigen |
|
| Übertragungsprotokolle |
|
| Unterstützte TCP/IP-Protokolle |
|
| Unterstützte Betriebssysteme |
|
| Ansteuerung |
|
| Stromversorgung |
|
| Stromverbrauch |
|
| Abmessungen (B x T x H) |
|
| Gewicht |
|
| Temperatur |
|
| Luftfeuchtigkeit |
|
PACKUNGSINHALT |
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
