10/100Mbps Fast Ethernet PCI Adapter

TE100-PCIWplus   (Version 1.0)

DISCONTINUED PRODUCT

The TE100-PCIWplus (Version 1.0) has been discontinued. It has been replaced by the TEG-10GECTX (Version v3.0R). For a list of discontinued products, click here.

Drivers

Driver
Dateiname: Driver_TE100PCIWplus.zip
SHA-1 Checksum: DAC1690B3166E3C430B1199245EE22B6D1350066
Datum: 7/25/2017
Dateigröße: 502.75 KB
Download

Datenblätter

Datasheet
Dateiname: Spec_TE100-PCIWplus.pdf
Datum: 5/2/2013
Dateigröße: 217.71 KB
Download Email
Hardware
Standards:
  • IEEE 802.3 10Base-T, IEEE 802.3µ 100Base-TX
Data Bus Width:
  • 32-bit bus mastering PCI
Data Transfer Rate:
  • 10/100Mbps (20/200Mbps in full-duplex mode)
Protocol:
  • CSMA/CD
Connectors:
  • 1 RJ-45 (10Mbps or 100Mbps speed)
Diagnostic LED's:
  • LNK (Green) Green light will light when a good link is established
  • 100 (Green) LED will light when a good 100Mbps connection is established.
  • Green LED will be unlit when a good 10Mbps connection is detected.
Network Drivers:
  • Novell ODI, NDIS, SCO UNIX , MS LAN Manager , Windows NT/95/98, Windows for Workgroups and Packet Driver
Temperature:
  • Operating: 0° to 50° C ( 32° -122° F)
  • Storage: -20° to 80° C ( -4° to 176° F)
Humidity:
  • Operating: 10 to 90% (non-condensing)
  • Storage: 10 to 90% (non-condensing)
Certifications:
  • FCC Class B, CE

Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.