Freigabevermerke
Version: 2.0.5
OS Compatibility: Windows 10/11 64-bit
Important Note: Please uninstall any previous versions of the TRENDnet AP and TRENDnet Management software utilities before installing this software utility. - Added compatibility for both specific Hive cloud supported access point and web smart switches devices
- Added batch multi-device Hive cloud registration feature
Dateiname: TRENDnet_Management_Utility(2.0.5).zip
SHA-1 Checksum: 3C8C4215DF5C530F5A27F0FF774BB2526E8D7860
Datum: 3/18/2024
Dateigröße: 69.05 MB
Firmware Version: v3.01.027
Release Date: 3/2024
Note:
Dateiname: TPE-1620WS_FW_3.01.027.zip
SHA-1 Checksum: 1DDF149BB267DA0BE3D0088F0E7D7EB863191D8E
Datum: 3/6/2024
Dateigröße: 12.35 MB
Firmware Version: v3.01.025
Release Date: 07/2023
Note:
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first, then firmware version 2.10.024 afterwards. (Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *
Fixes
- Fixed PoE Utilization table
Dateiname: FW_TPE-1620WS_fw_3.01.025.zip
SHA-1 Checksum: 51E37C968FEE70455CCBBB92B421D72FF661CBFA
Datum: 7/21/2023
Dateigröße: 12.34 MB
Firmware Version: v3.01.012
Release Date: 08/2021
Note:
* This download includes Firmware version 3.0.012, Firmware version 2.10.024 and Firmware version 1.10.026.
** If your firmware version is between firmware version 1.00.xx 1.00.023, please install firmware version 1.10.026 before upgrading to firmware version 2.10.024.
***If your firmware version is between firmware version 2.0.xx to 2.10.011, please install firmware version 2.10.024 first before upgrading to firmware version 3.01.012
If it is the first time upgrading the switch from 1.00.010 to 2.10.010 or above, it is recommended to manually reset the device to factory default and clear web browser cache after the loading firmware file.
- New GUI
- Add Ping Watchdog feature
- Adds Cloud enabled feature (TRENDnet Hive)
- Adds capability to backup, copy, restore config functions on Hive
- Adds capability to configure additional QoS functions
- Sync time settings from Hive
- Bug Fixes
Dateiname: TPE-1620WS_FW_3-01-012.zip
SHA-1 Checksum: 057D9134D842E2961902B34EDF4B5E2FE2C7A6E9
Datum: 5/5/2022
Dateigröße: 33.14 MB
Version: 3.00.002
Release Date: 3/2022
Note: - Added auto firmware upgrade feature
Dateiname: MIB_TPE-1620WS_v2(3.00.002).zip
Datum: 3/10/2022
Dateigröße: 115.66 KB
Dateiname: EN_datasheet_TPE-1620WS_(v2.5R).pdf
Datum: 8/4/2021
Dateigröße: 444.39 KB
Dateiname: FR_datasheet_TPE-1620WS_(v2.5R).pdf
Datum: 8/4/2021
Dateigröße: 410.87 KB
Dateiname: GE_datasheet_TPE-1620WS_(v2.5R).pdf
Datum: 8/4/2021
Dateigröße: 412.87 KB
Dateiname: PO_datasheet_TPE-1620WS_(v2.5R).pdf
Datum: 8/4/2021
Dateigröße: 427.56 KB
Dateiname: SP_datasheet_TPE-1620WS_(v2.5R).pdf
Datum: 8/4/2021
Dateigröße: 423.18 KB
Dateiname: IT_datasheet_TPE-1620WS_(v2.5R).pdf
Datum: 8/4/2021
Dateigröße: 424.79 KB
Dateiname: EN_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Datum: 8/18/2022
Dateigröße: 5.42 MB
Dateiname: FR_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Datum: 8/18/2022
Dateigröße: 4.54 MB
Dateiname: GE_PoE_Web_Smart_Switch_Series_v2.0R_081722.pdf
Datum: 8/18/2022
Dateigröße: 4.45 MB
Dateiname: PT_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Datum: 8/18/2022
Dateigröße: 3.46 MB
Dateiname: SP_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Datum: 8/18/2022
Dateigröße: 3.43 MB
Dateiname: RU_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Datum: 8/18/2022
Dateigröße: 3.36 MB
Dateiname: ITA_PoE_Web_Smart_Switch_Series_v2.0R_010722.pdf
Datum: 8/18/2022
Dateigröße: 3.38 MB
Dateiname: TRENDnet_Hive_User_Guide_08172021.pdf
Datum: 10/6/2021
Dateigröße: 2.45 MB
Dateiname: PoE_Web_Smart_Switch_Series_Users_Guide_11122020.pdf
Datum: 1/11/2021
Dateigröße: 4.69 MB
PNG Image
Dateigröße: : 1.24 MB
Datum: : 9/17/2021
PNG Image
Dateigröße: : 901.42 KB
Datum: : 9/17/2021
PNG Image
Dateigröße: : 945.62 KB
Datum: : 9/17/2021
You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
Only managed or web smart PoE Switches will have reset instruction. Unmanaged PoE Switches are not configurable and do not have settings to reset. Your Switch will have a reset button. This button is typically recessed and located on the front or the back of the Switch. You will need a small pin or ...
A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website. The TPE-1620WS power budget is 185W....
The TPE-1620WS supports IEEE 802.3af and 802.3at PoE standards. TRENDnet PoE Switches typically support IEEE industry standards. Please check detailed product specifications under the Product section of our website. If your device is not IEEE PoE compliant it may not be compatible with TRENDnet PoE ...
The default IP address is 192.168.10.200
The default username and password are both admin.
...
The PoE budget is 185 Watt
Press and hold this button for 10 seconds and release to reset the switch to factory defaults.
...
Yes, you are able to use non-Power over Ethernet devices with TPE-1620WS. Power over Ethernet technology uses digital signatures to identify PoE devices and their proper powering requirements, and any device that does not have a digital signature will not be powered ensuring its protection....
Yes. The switch supports IPv6 configuration and neighbor IPv6 network support.
Standards | - IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3af
- IEEE 802.3at
- IEEE 802.3az
|
---|
Geräteschnittstelle | - 16 x Gigabit PoE+ Ports
- 4 geteilte Gigabit-Ports (RJ-45/SFP)
- LED-Leuchten
|
---|
Datenübertragungsrate | - Ethernet: 10 Mbps (Halbduplex), 20 Mbps (Vollduplex)
- Fast Ethernet: 100 Mbit/s (Halbduplex), 200 Mbit/s (Vollduplex)
- Gigabit Ethernet: 2000 Mbit/s (Vollduplex)
|
---|
Leistung | - Switch Fabric: 40 Gbps
- RAM-Puffer: 4.1 Mbit
- MAC Adressentabelle: 8 K Einträge
- Jumbo Frames: 10 KB
- HOL Blockiervermeidung
- Weiterleitungsrate: 29,8 Mpps (64-byte Paketgröße)
|
---|
Management | - HTTP/HTTPS (SSL v2/3 TLS) webbasiertes GUI
- SNMP v1, v2c, v3
- RMON v1
- Static Unicast MAC-Adresse
- Stromsparfunktion 802.3az aktivieren/deaktivieren
- LLDP und LLDP-MED
- Virtueller Kabeldiagnostiktest
- IPv6: IPv6 Neighbor Discovery, IPv6 Statisch IP, DHCPv6, Auto-Konfiguration
|
---|
MIB | - IP WEITERLEITUNGSTABELLE MIB RFC 1354
- RMON-MIB RFC 1271
- IPV4-MIB RFC 1213
- IPV6-MIB RFC 2465
- GVRP-MIB IEEE 802.1Q-VLAN
- LA-MIB IEEE 802.3ad
- LLDP-MIB IEEE 802.1AB
- IGMP SNOOPING-MIB RFC 2933
- MLD SNOOPING-MIB RFC 3019
- PRIVATES VLAN-MIB IEEE 802.1Q
- DHCPSNOOP-MIB RFC 2026
- QOS-MIB RFC 4323
- SNMP-MIB RFC 3415
- STP-MIB RFC 4318
- PNAC-MIB IEEE 802.1x
- VLAN-MIB IEEE 802.1q
- DNS-MIB RFC 1611
- ACL-MIB
- BANDBREITENKONTROLLE-MIB
- LBD-MIB
- MIRROR-MIB
- IPV6 NEIGHBOR-MIB
- SNTP-MIB
- STORM CTRL-MIB
- STATISTIK-MIB
- Tool-MIB
- VOICE VLAN-MIB
- DOS-MIB
|
---|
Spanning Tree | - IEEE 802.1D STP (Spanning Tree Protokoll)
- IEEE 802.1w RSTP (Rapid Spanning Tree Protokoll)
- IEEE 802.1s MSTP (Multiple Spanning Tree Protokoll)
|
---|
Link Aggregation | - Static Link Aggregation
- 802.3ad Dynamic LACP
|
---|
Quality of Service (QoS) | - 802.1p Class of Service (CoS)
- DSCP (Differentiated Services Code Point)
- Bandbreitenkontrolle je Port
- Warteschlangenplanung: Strict Priority, Weighted Round Robin (WRR)
|
---|
VLAN | - Multiple Management VLAN-Zuteilung
- Asymmetrisches VLAN
- 802.1Q Tagged VLAN
- Dynamic GVRP
- Bis zu 256 VLAN Gruppen, ID Bereich 1-4094
- Privates VLAN (geschützte Ports)
- Voice VLAN (10 benutzerdefinierte OUIs)
|
---|
Multicast | - IGMP Snooping v1, v2, v3 (per VLAN)
- Static Multicast Address
- Bis zu 256 Multicast-Einträge
|
---|
Port-Spiegelung | - RX, TX, oder beides
- One-to-one
|
---|
Verschlüsselung | - 802.1X portbasierte Netzwerkzugangskontrolle, RADIUS, TACACS+
- Lokale Benutzerauthentifizierung
- DHCP Snooping (über VLAN)
- Loopback-Erkennung
- Doppelte Adresserkennung
- Trusted Host
- Denial of Service (DoS)
|
---|
ACL IPv4 L2-L4 & IPv6 | - MAC-Adresse
- VLAN ID
- Ether Type (nur IPv4)
- IP-Protokoll 0-255
- TCP/UDP Port 1-65535
- 802.1p
- DSCP (nur IPv4)
- IPv6 Adresse (nur IPv6)
|
---|
Kompatibilität | - Optionales Softwarehilfsprogramm: Windows® 10, 8.1, 8, 7, Vista, XP, Windows® 2003/2008 Server
|
---|
Sonderfunktionen | - PoE+
- IPv6
- 802.3az (stromsparend)
- Rackmontierbar
- PoE-Planung
|
---|
Stromversorgung | - Eingang: 100 – 240 V AC, 50/60 Hz, eingebautes Netzteil
- Verbrauch: 226 W (max.)
- Gesamtleistung: 185 W
|
---|
Lüfter/Akustik | - Menge: 2
- Geräuschpegel: 52 dB(A) (max.)
|
---|
MTBF | |
---|
Betriebstemperatur | |
---|
Betriebsfeuchtigkeit | - Max. 95% nicht-kondensierend
|
---|
Maße | - 440 x 250 x 44 mm (17,3 x 9,8 x 1,74 Zoll)
- Rackmontierbar, 1U hoch
|
---|
Gewicht | |
---|
Zertifizierungen | |
---|
Garantie | |
---|
PACKUNGSINHALT |
- TPE-1620WS
- Schnellinstallationseinrichtung
- CD-ROM (Hilfsprogramm und Benutzerhandbuch)
- Stromkabel (1,8m/6 Fuß)
- Montagesatz für Gestell
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.