Wireless-N150 ADSL 2/2+ Modem-Router

TEW-718BRM   (Version v1.0R)

  • Kombination aus Modem und Wireless-N-Router
  • Mit ADSL 2 und ADSL 2+ ISP Netzwerken kompatibel
  • Von Internetdienstanbieter braucht kein Modem gemietet zu werden
  • Vier Ethernet-Ports für verkabelte Geräte
DISCONTINUED PRODUCT
The TEW-718BRM (Version v1.0R) has been discontinued. For a list of discontinued products, click here.
Firmware
Dateiname: Firmware_Upgrade_Procedure.pdf
SHA-1 Checksum: A1416AE8724B309C4268E5B94CFF002D1CA11BD5
Datum: 7/28/2017
Dateigröße: 67.16 KB

Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung.
Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch.

Version:1.00.11
Date: 9/2013
Note:

  1. Added UPnP stealth mode when enabled to prevent against UPnP scan/detection tools

Firmware Upgrade Procedure


Dateiname: FW_TEW-718BRM_v1(1.00.11).zip
SHA-1 Checksum: DFC4C85240E1F08C9DC8FA1616BA340503FFBE45
Datum: 7/28/2017
Dateigröße: 5.75 MB
Datenblätter
Dateiname: EN_spec_TEW-718BRM(v1.0R).pdf
Datum: 2/14/2013
Dateigröße: 512.64 KB

Dateiname: FR_spec_TEW-718BRM(v1.0R).pdf
Datum: 2/14/2013
Dateigröße: 507.31 KB

Dateiname: GE_spec_TEW-718BRM(v1.0R).pdf
Datum: 2/14/2013
Dateigröße: 501.54 KB

Dateiname: SP_spec_TEW-718BRM(v1.0R).pdf
Datum: 2/14/2013
Dateigröße: 517.94 KB

Dateiname: RU_spec_TEW-718BRM(v1.0R).pdf
Datum: 2/6/2014
Dateigröße: 994.14 KB

Dateiname: IT_spec_TEW-718BRM(v1.0R).pdf
Datum: 2/14/2013
Dateigröße: 510.98 KB
Kurzanleitung zur Installation
Dateiname: EN_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.88 MB

Dateiname: FR_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.90 MB

Dateiname: GE_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.88 MB

Dateiname: PO_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.89 MB

Dateiname: SP_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.88 MB

Dateiname: RU_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 5.28 MB

Dateiname: EST_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.28 MB

Dateiname: POL_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.41 MB

Dateiname: RO_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 2.02 MB

Dateiname: NL_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.55 MB

Dateiname: HU_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.39 MB

Dateiname: BL_Web_TEW-718BRM(V1.0R).pdf
Datum: 2/14/2013
Dateigröße: 1.70 MB
Bedienungsanleitung
Dateiname: UG_TEW-718BRM(v1.0R).pdf
Datum: 2/14/2013
Dateigröße: 2.12 MB
Produktbild(er)
JPEG Image
Dateigröße: : 235.71 KB
Datum: : 12/12/2012
JPEG Image
Dateigröße: : 241.71 KB
Datum: : 12/12/2012
JPEG Image
Dateigröße: : 217.87 KB
Datum: : 12/12/2012
JPEG Image
Dateigröße: : 313.65 KB
Datum: : 12/12/2012
TIFF Image
Dateigröße: : 2.92 MB
Datum: : 12/12/2012
TIFF Image
Dateigröße: : 2.95 MB
Datum: : 12/12/2012
TIFF Image
Dateigröße: : 2.66 MB
Datum: : 12/12/2012
TIFF Image
Dateigröße: : 3.65 MB
Datum: : 12/12/2012
Please verify all settings with your ISP. You will need the correct VPI and VCI values. Please also verify if they require the use of a Service Name. Check to see if the require a specific MTU value as well. When you have gathered this information do the following to apply them to the TEW-718BRM. ...
Push and hold the WPS button located on the back of your router for 3 seconds and release it. A blue LED on your router WPS button will flash indicating that the WPS setup process has been activated on your router. Push the WPS button on the wireless device you are connecting. ...
Log in to the TEW-718BRM by entering https://192.168.10.1 into the address line of your browser. You will be prompted to log in to the Router. The default User Name and Password are both admin, without the quotes. Click Setup>Wireless Settings>WPS Setup The AP PIN will be the pin number th...
Press and hold in the recessed reset button on the back of the Router for approximately 10 seconds while the power is on to reset the unit. The default login values are as follows. IP Address: 192.168.10.1 Username: admin Password: admin...
Log in to the TEW-718BRM by entering https://192.168.10.1 into the address line of your browser. You will be prompted to log in to the Router. The default username and password are both admin. After you have logged in to the TEW-718RM click on the Advanced > NAT page>Virtual Server and create...
The default username and password for the TEW-718BRM are both admin.
Log in to the TEW-718BRM by entering https://192.168.10.1 into the address line of your browser. You will be prompted to log in to the Router. The default User Name and Password are both admin, without the quotes. ...
Log in to the TEW-718BRM by entering https://192.168.10.1 into the address line of your browser. You will be prompted to log in to the Router. The default User Name and Password are both admin, without the quotes. Click on Setup, and click on Wireless Settings. Here you can setup your wire...
Hardware
Standards
  • IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.11g, beruht auf IEEE 802.11n Technologie
  • Kompatibel mit ADSL standards ANSI T1.413 Issue2
  • G.992.1 (G.dmt, Annex A)
  • G.992.2 (G.lite)
  • Kompatibel mit ADSL2 standards
  • G.992.3 (G.dmt.bis, Annex L)
  • Kompatibel mit ADSL2+ standards
  • G.992.5 (G.dmt.bis+, Annex M)
WAN (ADSL-Schnittstelle)
  • 1 x RJ-11 (Telefon) Port
LAN
  • 4 x 10/100 MBit/s Auto-MDIX RJ-45-Ports (option to convert port 1 to WAN port)
Rücksetz- / WPS- / WLAN-Taste
  • Rücksetz: tellt alle Einstellungen auf Herstellerstandard zurück (15 Sekunden lang gedrückt halten )
  • WPS: aktiviert WiFi-geschützte Installation (WPS) (3 Sekunden lang gedrückt halten.)
  • WLAN: aktiviert bzw. deaktiviert Funkverbindung (10 Sekunden lang gedrückt halten
ATM- & PPP-Protokolle / Modi
  • VC- und LLC-Multiplexverfahren (bis zu 8 PVC)
  • Ethernet über ATM (RFC 1483 Überbrückung) mit NAT
  • RFC 1483 Überbrückung
  • IP über ATM (RFC 1483 Weiterleitung)
  • PPP über ATM (RFC2364)
  • PPP über Ethernet (RFC2516)
  • ATM-Verbindung QoS (UBR, CBR, VBR, GFR)
Firewall
  • NAT, SPI, DMZ-Host, virtuelle Server, MAC- / IP-Filter, URL- / Stichwortfilter, Zurückweisung von WAN-Pings und WAN-Stealth-Modus
Zeitpläne
  • Einrichtung von Zeitplänen für drahtlose Verbindung, virtuellen Server, Paketfilter und QoS
Netzwerkprotokolle/-funktionen
  • IGMP v1/2/3 Proxy und Snooping
  • Statisches und dynamisches RIP v1/2 Routing
  • UPnP
  • DHCP (dynamische Adresszuweisung) für Server/Relais
  • Dynamische DNS (DynDNS.com, No-IP.com, TZO.com und dhs.org)
  • NTP (Network Time Protocol)
  • PPTP / L2TP / IPsec VPN Pass-Through
  • IPv6: statisch, DHCPv6, PPPoE, 6to4 und IPv6 in IPv4 Tunnel, Stateful / Stateless Auto-Konfiguration
Dienstqualität
  • Smart-QoS (einfach) oder manuell definierte QoS ToS / CoS (Diensttyp / Dienstklasse) auf IP-Basis, TCP/UDP-Port, MAC, DSCP (Netzwerkknoten für differenzierte Dienste) und WMM
Ansteuerung / Überwachung
  • Lokale / Fernkonfiguration, Aktualisierung der Firmware, Sicherung/Wiederherstellung der Konfiguration über Webbrowser, TR-069-Fernmanagement, DoS (Denial of Service) Erkennung, internes Systemprotokoll, Syslog, E-Mail-Benachrichtigungen, SNMP v1/v2c, Ping-Test-Funktion, Wake-on-LAN (WoL), NAT-Statusprotokoll, Protokoll der angeschlossenen Geräte, Protokoll der Internetverbindung, Modemprotokoll
LED Indicators
  • Status, ADSL, WLAN, LAN1~LAN4
Netzteil
  • Eingang: 100~240 V AC, 50~60 Hz, 0,2 A
  • Ausgang: 5 V DC, 1,2 A (Externes Netzteil)
Stromverbrauch
  • 5 watts (max)
Abmessungen (B x T x H)
  • 189 x 118 x 33 mm (7,4 x 4,6 x 1m,3 zoll)
Gewicht
  • 221,1 g (7,8 unzen)
Temperatur
  • Funktionieren: 0° ~ 40°C (32°F ~ 104°F)
  • Lagerung: -10° ~ 70°C (14°F ~ 158°F)
Luftfeuchtigkeit
  • Max. 95% (nicht kondensierend)
Zulassungen
  • CE, FCC
DRAHTLOSE VERBINDUNG
Frequenzbereich
  • 2.4 ~2.483GHz band
Modulationen
  • DBPSK / DQPSK / CCK / OFDM (BPSK / QPSK / 16-QAM / 64-QAM)
Betriebsarten
  • Access Point Router
  • Nur Access Point
  • WDS Hybrid
  • Nur WDS
  • Universal-Repeater
SSID
  • Übertragung von bis zu 2 SSIDs mit unterschiedlicher Verschlüsselung und Unterstützung der VLAN-Zuordnung
Antenna
  • Abnehmbare 2 dBi-Dipolantenne (TEW-718BRM5: 1 x Abnehmbare 5 dBi-Dipolantenne)
Datenrate
  • 802.11b: bis zu 11 MBit/s
  • 802.11g: bis zu 54 MBit/s
  • 802.11n: bis zu 150 MBit/s
Sicherheit
  • WEP (HEX/ASCII): 64/128-bit
  • WPA (AES/TKIP): WPA / WPA2-RADIUS, WPA-PSK / WPA2-PSK
Output Power
  • 802.11b: 17 dBm (normal)
  • 802.11g: 14 dBm (normal)
  • 802.11n: 14 dBm (normal)
Empfangsempfindlichkeit
  • 802.11b: -91 dBm (normal) @ 11 MBit/s
  • 802.11g: -91 dBm (normal) @ 54 MBit/s
  • 802.11n: -87 dBm (normal) @ 150 MBit/s
Kanäle
  • 1~ 11 (FCC), 1~13 (ETSI)
PACKUNGSINHALT
  • TEW-718BRM
  • Mehrsprachige Installationsanleitung
  • CD-ROM (Gebrauchsanleitung)
  • Netzteil (5 V DC, 1.2 A)
  • Abnehmbare antenne
  • Netzwerkkabel (1.5 m / 5 ft.)
  • RJ-11-Telefonkabel (1,8 m / 5,4 ft)

Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.