Search FAQs
Browse by Product
How can I setup the camera using a Macintosh?
FAQ ID: 1925 Product: TV-IP312Updated:7/13/2009 1:41:39 PM

The camera can be configured from a Macintosh through its web-based configuration page.  The camera's web configuration page can be reached by entering its IP address into a web browser.  For example, if the IP address is 192.168.10.30 you would access it by opening your web browser and entering https://192.168.10.30 into the address line. 

Please note that if you are not using Internet Explorer that Active X components will not load.   For example, setting up the motion detection windows is not possible without Active X support.


Was this information helpful?
Related FAQs:
Attachments:
No attachments found.