Easy-N-Upgrader™ wireless 300 Mbps

TEW-637AP   (Version 1.0R)

  • Non gettare via il tuo vecchio router cablato o wireless, ma portalo all'alta velocità del wireless n
  • Nessuna necessità di configurazione, basta inserirlo nel tuo vecchio router
  • Godi di una velocità 12 volte maggiore e di una copertura 6 volte più estesa del wireless g
  • Wireless Protected Setup (WPS) sicuro al semplice tocco di un pulsante

How It Works

DISCONTINUED PRODUCT

The TEW-637AP (Version 1.0R) has been discontinued. It has been replaced by the TEW-638APB (Version v3.0R). For a list of discontinued products, click here.

Utilità

Nome del file: TEW-637AP_Install_Wizard.zip
SHA-1 Checksum: C86938CD2EEFDDB1B6030AFC3D3FC3ABF06E8EE9
Data: 7/26/2017
Dimensioni del file: 10.34 MB

Firmware

NON aggiornare il firmware di un prodotto TRENDnet mediante connessione wireless.
L'aggiornamento del firmare mediante connessione wireless può danneggiare il prodotto. Eseguire l'aggiornamento del firmware solo con connessione di rete cablata.

Firmware Version: 1.2.0.26
Release Date: 5/2009
Notes:
1. Add multicast Mac address check rule
2. Display wireless information on the status page
3. Fixed webpage display format on Firefox and Safari
4. Fixed WDS feature setting issue
5. Fixed Mac filter only works on initial setup

Note: Firmware downgrades will not be available after this change.


Nome del file: FW_TEW-637APB_V1.0(1.2.0.26).zip
SHA-1 Checksum: 96550C4155527B306AA98CCBB029C2AC1B92AE7B
Data: 7/26/2017
Dimensioni del file: 2.04 MB

Scheda tecnica

Nome del file: EN_Spec_TEW-637AP.pdf
Data: 7/26/2012
Dimensioni del file: 1.04 MB
Nome del file: FR_Spec_TEW-637AP.pdf
Data: 7/26/2012
Dimensioni del file: 1.07 MB
Nome del file: GE_Spec_TEW-637AP.pdf
Data: 7/26/2012
Dimensioni del file: 1.05 MB
Nome del file: SP_Spec_TEW-637AP.pdf
Data: 7/26/2012
Dimensioni del file: 1.04 MB
Nome del file: RU_Spec_TEW-637AP.pdf
Data: 7/26/2012
Dimensioni del file: 1.07 MB
Nome del file: ITA_Spec_TEW-637AP(1.0).pdf
Data: 7/26/2012
Dimensioni del file: 1.06 MB

Guida rapida per l'installazione

Nome del file: EN_QIG_TEW-637AP(V1).pdf
Data: 2/5/2009
Dimensioni del file: 701.79 KB
Nome del file: FR_QIG_TEW-637AP(V1).pdf
Data: 2/5/2009
Dimensioni del file: 700.15 KB
Nome del file: GE_QIG_TEW-637AP(V1).pdf
Data: 2/5/2009
Dimensioni del file: 699.94 KB
Nome del file: PO_QIG_TEW-637AP(V1).pdf
Data: 2/5/2009
Dimensioni del file: 699.33 KB
Nome del file: SP_QIG_TEW-637AP(V1).pdf
Data: 2/5/2009
Dimensioni del file: 701.07 KB
Nome del file: RU_QIG_TEW-637AP(V1).pdf
Data: 2/5/2009
Dimensioni del file: 1.21 MB
Nome del file: Italian_Lineart_Web_QIG_TEW-637AP(V1.0R).pdf
Data: 12/14/2012
Dimensioni del file: 4.01 MB
Nome del file: EST_QIG_TEW-637AP(V1).pdf
Data: 2/5/2009
Dimensioni del file: 700.33 KB

Guida per l'utente

Nome del file: UG_TEW-637AP.pdf
Data: 8/18/2008
Dimensioni del file: 1.69 MB

Immagine/i del prodotto

JPEG Image
Dimensioni del file: : 232.45 KB
Data: : 2/6/2008
JPEG Image
Dimensioni del file: : 178.94 KB
Data: : 2/6/2008
JPEG Image
Dimensioni del file: : 176.98 KB
Data: : 2/6/2008
TIFF Image
Dimensioni del file: : 3.22 MB
Data: : 2/6/2008
TIFF Image
Dimensioni del file: : 2.47 MB
Data: : 2/6/2008
TIFF Image
Dimensioni del file: : 2.52 MB
Data: : 2/6/2008
ROHS compliant WEEE crossed-out bin symbol.
Step 1 Log in to the TEW-637AP by entering its IP address into a browser.  The default IP address is 192.168.10.1.  The default user name is admin.  The default password is admin. Step 2 Click on "Administrator" on the left hand side then click on "Management". Step 3 Enter the desired Administr...
The IP address that appears in the Current Network Information screen is the default IP address of the TEW-637AP.  If you select Dynamic IP Address Configuration, the IP address will not be updated until you complete the configuration of the TEW-637AP. Continue on with the configuration.  When you r...
The default user name is admin and the default password is admin.  To log in to the web browser configuration for the first time, from a computer that is connected to the same network as the TEW-637AP, open the web browser (e.g. Internet Explorer), go to the TEW-637AP's Network Address (please ...
In order to receive wireless n performance from the TEW-637AP, all wireless client adapters must be 802.11n wireless n adapter in the computer to communicate at wireless n. The use of existing wireless b/g client adapters will still benefit for the increased signal and extended coverage of the TEW-6...
The provided wizard is very easy to use since there is no need to install anything, the wizard is ran directly off the TEW-637AP CD-ROM.  The wizard enables users to easily setup the following: Required Steps: Connecting the Access Point to your existing route/network, which then dynamically as...
Yes, the TEW-637AP is an access point.
The TEW-637AP is designed to easily upgrade your current network to wireless N technology. When we say upgrade we mean that you can upgrade a wired network that does not currently have wireless technology and/or networks that utilize 802.11b/g that need to upgrade wireless speeds up to 300Mbps....
The TEW-637AP is designed to upgrade you current wireless network to 11n, but clients wishing to receive faster speeds must also have an 802.11n wireless adapter installed...
The TEW-637AP is backwards compatible with 802.11b/g wireless adapters, and it will also allow computers with 802.11n adapters to communicate at 802.11n speeds to all computers on the wired LAN (Local Area Network)....
Yes, the TEW-637AP has WDS technology, which allows you to wireless link up to 4 TEW-637AP together for extended wireless coverage....
Unfortunately the TEW-637AP does not support Client Access Point operation mode.
The TEW-637AP supports WEP, WPA, WPA2 encryption methods for securing your wireless network. It is required to use WPS-PSK AES encryption method in order to secure your network while retaining 802.11n speeds (300Mbps). ...
WPS is an acronym for WiFi Protected Setup. WPS is a new way of securing your wireless network by using a hardware button located on the front of the TEW-637AP. When the button is pressed the wireless client adapter has two minutes to activate the PBC (push button control). After the PBC option is s...
The TEW-637AP does not accept external antennas to boost coverage.
Yes, The TEW-637AP is a WiFi Certified product.
Hardware
StandardsIEEE 802.11n bozza 2.0 IEEE 802.11b, IEEE 802.11g, 2.0 e 802.11e
Interfaccia1 porta 10/100Mbps Auto-MDIX LAN
Indicatore LEDAlimentazione, LAN, WPS e Wireless
Alimentazione ElettricaAdattatore d'alimentazione esterno 12V DC 1A
Dimensioni (LxAxP)120 x 26 x 88 mm (4.7 x 1.0 x 3.4)
Peso160 g (0.3lb)
Temperatura0° a 40° C (32° ~ 104° F)
Umidità
20ºC a 60ºC (4ºF a 140ºF)
Senza Fili
Tecnica modulo
  • 802.11b: CCK (11 e 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps)
  • 802.11g: OFDM con modulazioni sub-carrier BPSK, QPSK e 16/64-QAM
  • 802.11n: OFDM con modulazioni sub-carrier BPSK, QPSK e 16/64-QAM
Antenna2 antenne dipolari 2dBi fisse
Frequenza
  • 2.412 - 2.462 Ghz (America Settentrionale)
  • 2.412 - 2.472 GHz (Europa)
Protocollo di accesso mediaCSMA/CA
Tasso Dati (Fallback automatico)
  • 802.11n 2.0 bozza: fino a 300Mbps
  • 802.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps, 6 Mbps
  • 802.11b: 11Mbps, 5.5Mbps, 2Mbps, 1 Mbps
Potere dell'uscita
  • 802.11n (bozza 2.0) : 14dBm (tipico) con HT20/HT40
  • 802.11g: 15 Mbps (tipico)
  • 802.11b: 18Mbps (tipico)
Ricezione della sensibilità
  • 802.11n (bozza 2.0) : -70dBm (tipico) con HT20/HT40
  • 802.11g: -72 dBm (tipico) @ 54MBbps
  • 802.11b: -84dBm (tipico) @ 11Mbps
CifraturaCifratura PSK/WPA2-PSK, WPA Enterprise WPA2 Enterprise
Canali1~ 11 (America Settentrionale), 1~13 (Europa)

CONTENUTO DELLA CONFEZIONE

  • TEW-637AP
  • Manuale d'installazione rapida in più lingue
  • CD-ROM con manuale per l'utente
  • Un cavo Cat5 (0,6 metri, 2 ft.)
  • Alimentatore di corrente (12V DC, 1A)

Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.