Punto d'accesso Hot Spot N300 Wireless
TEW-636APB (Version V1.0R)
- 12 volte più veloce e 6 volte più esteso del wireless g
- La tecnologia wireless avanzata dell'antenna (MIMO) aumenta la copertura wireless ed elimina i punti morti.
- Le modalità Functional Access Point, Bridge o Repeater offrono una maggiore flessibilità della rete
DISCONTINUED PRODUCT
The TEW-636APB (Version V1.0R) has been discontinued. It has been replaced by the TEW-821DAP (Version v2.5R). For a list of discontinued products, click here.Firmware
NON aggiornare il firmware di un prodotto TRENDnet mediante connessione wireless. L'aggiornamento del firmare mediante connessione wireless può danneggiare il prodotto. Eseguire l'aggiornamento del firmware solo con connessione di rete cablata. |
Firmware Version: v1005
Release Date: 11/17/2008
Release Note:
- Add DHCP Client
- Improved wireless connection
Nome del file: FW_TEW-636APB_v1.x(1.0.0.5).zip
SHA-1 Checksum: 62E9D349445998676CFD01FDDD3DF0C3339042A4
Data: 7/26/2017
Dimensioni del file: 3.16 MB
Scheda tecnica
Nome del file: EN_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Dimensioni del file: 476.05 KB
Nome del file: FR_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Dimensioni del file: 482.13 KB
Nome del file: GE_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Dimensioni del file: 482.09 KB
Nome del file: SP_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Dimensioni del file: 481.25 KB
Nome del file: RU_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Dimensioni del file: 1.51 MB
Nome del file: ITA_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Dimensioni del file: 475.45 KB
Guida rapida per l'installazione
Nome del file: EN_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Dimensioni del file: 835.96 KB
Nome del file: FR_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Dimensioni del file: 857.56 KB
Nome del file: GE_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Dimensioni del file: 880.84 KB
Nome del file: PO_QIG_TEW-636APB(V1.0R).pdf
Data: 7/7/2008
Dimensioni del file: 816.49 KB
Nome del file: SP_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Dimensioni del file: 840.60 KB
Nome del file: RU_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Dimensioni del file: 1.53 MB
Guida per l'utente
Nome del file: UG_TEW-636APB.pdf
Data: 6/13/2008
Dimensioni del file: 13.26 MB
Immagine/i del prodotto
The TEW-636APB can support up to 32 wireless client connections per one Access Point.
No, no software or utility is required to allow this product to work. The TEW-636APB is completely ready to use out of the box (Note: please refer to Quick Installation Guide that is included with this product)....
I am not getting that many bars on my wireless signal, what can I do to improve the wireless signal?
When using the TEW-636APB from time to time you may experience issues with wireless signal loss or no signal, this is due to environmental conditions in and out of any structure or objects in the way. Since wireless is based on line of sight. The wireless signals do not pass through objects, walls o...
No, the Internet works independently from the wireless Access Point and Local Area Network (LAN). Your Internet Service Provider controls your Internet speed. ...
Yes, the TEW-636APB is fully compatible with WDS. In the AP Modes; you can add additional Access Point(s) to extend your coverage of your wireless network. (Note: AP Modes will support the use of wireless b/g/n to extend the wireless LAN. The use of multiple Access Points will reduce the overall net...
Yes, the TEW-636APB allows you to create up to three additional virtual SSIDs (Wireless Network Name) to connect with. Multiple Service Set Identifiers (SSID) allow the ability to create virtual wireless networks while only using one wireless Access Point device as the main connecting point. Create ...
The TEW-636APB supports the following security for wireless networks, WEP, WPA/WPA2, WPA/WPA2 Enterprise, Wireless MAC filtering, and WiFi Protected Setup (WPS)....
Yes, the TEW-636APB is fully compatible with existing 802.11b/g/n wireless networking devices.
The TEW-636APB has two built in wireless radios for transmitting and receiving at the same time.
Rogue AP detection is a security feature that will let you know if someone has connected an Access Point that is not authorized or belong to your current LAN. Once configured, this feature can monitor your wireless network for any new Access Points operating in your WLAN. Once detected, you can add ...
Virtual LAN, a network of computers that behave as if they are connected to the same wired network even though they may actually be physically located on different parts on a LAN. The TEW-636APB allows you to create VLAN to separate wireless client from each other while connecting to the same TEW-63...
802.11d (worldwide mode) is a wireless network communications specification for use in countries where systems using other standards in the 802.11 variations are not allowed to operate. This will allow the TEW-636APB to communicate in countries where there are different restrictions on wireless radi...
Yes, the user settings can be safely stored off the TEW-636APB and re-applied to the device in the event of updating the firmware or restoring the device default settings....
Here are minimum operating requirement for the TEW636APB:
Web Browser: Internet Explorer (5.5 or higher)
A computer with a network adapter or wireless adapter properly installed.
DHCP Server
A RJ-45 network cable.
TEW-621PC version 2 or TEW-623PI version 2 (Optional)
...
Open your web browser, type https://SCXXXXXX, in the Address bar, and then press Enter. XXXXXX represents the last 6 digits of the Mac Address. You can find the Mac Address on the bottom of the router. ...
| Hardware | |
| Standards | Cablato: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX) Senza Fili: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
| Interfaccia | 1 porta 10/100Mbps Auto-MDIX LAN |
| Pulsante reset | Ripristina le impostazioni di fabbrica |
| Pulsante Config | Solo per l'uso con funzione WPS |
| Indicatore LED | WPS, Alimentazione, WLAN, Stato |
| Adattatore d'alimentazione | Adattatore d'alimentazione esterno 12VDC, 1A |
| Dimensioni (L x A x P) | 180 x 122 x 30 mm (6.8 x 4.6 x 1.1 pollici) |
| Peso | 320g (0.7 lbs) |
| Temperatura | Funzionamento: 0°~ 40°C (32°F~ 104°F) Stoccaggio: -20°~ 60°C (-4°F~140 °F) |
| Umidità | Max. 90% (senza condensa) |
| Certificazione | CE, FCC |
| Senza Fili | |
| Frequenza |
|
| Tecnica modulo |
|
| Antenne | 3 antenne dipolari 2dBi estraibili |
| Protocolo de Acesso | CSMA/CA con ACK |
| Velocità dati (Auto Fallback) |
|
| Cifratura | Cifratura: Hardware AES/TKIP, 64/128-bit WEP (Hex) 802.1X/EAP: WPA/WPA2/802.1X autenticatore WPA: WPA-PSK/WPA2-PSK, WPA-impresa, WPA2-Impresa SSID Broadcast Controllo |
| Potere dell'uscita |
|
| Sensibilità di ricezione |
|
| Canali | 1-11 (US) 1-13 (EU) |
CONTENUTO DELLA CONFEZIONE |
|
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.
