Home Router wireless N 300 Mbps
TEW-632BRP (Version A1.0R)
- 12 volte più veloce e 4 volte più esteso del wireless g
- streaming video, download dei file, conversazione online e videogiochi, tutto contemporaneamente
- la codifica wireless avanzata ed il firewall offrono solida sicurezza
- installazione “Easy-Go”
DISCONTINUED PRODUCT
The TEW-632BRP (Version A1.0R) has been discontinued. It has been replaced by the TEW-831DR (Version v1.0R). For a list of discontinued products, click here.Firmware
NON aggiornare il firmware di un prodotto TRENDnet mediante connessione wireless. L'aggiornamento del firmare mediante connessione wireless può danneggiare il prodotto. Eseguire l'aggiornamento del firmware solo con connessione di rete cablata. |
Firmware Version: 1.010B32
Release Date: 6/2011
Notes:
- Fixed "Update" button does not check duplication of host name.
- Update default "User" account password "user".
- Fixed “Time Zone” is NOT restored from configuration file.
- Update login privilege changed after 2nd user login.
Nome del file: TEW-632BRPA1_(FW1.10B32).zip
SHA-1 Checksum: 2B2FA94203CEE1A8FE2234E2F190D559CDC2064F
Data: 7/26/2017
Dimensioni del file: 3.32 MB
Scheda tecnica
Nome del file: EN_Spec_TEW-632BRP.pdf
Data: 6/28/2012
Dimensioni del file: 1.63 MB
Nome del file: FR_Spec_TEW-632BRP.pdf
Data: 6/28/2012
Dimensioni del file: 1.57 MB
Nome del file: GE_Spec_TEW-632BRP.pdf
Data: 6/28/2012
Dimensioni del file: 1.60 MB
Nome del file: SP_Spec_TEW-632BRP.pdf
Data: 6/28/2012
Dimensioni del file: 1.66 MB
Nome del file: RU_Spec_TEW-632BRP.pdf
Data: 6/28/2012
Dimensioni del file: 1.62 MB
Nome del file: ITA_Spec_TEW-632BRP(A1.0R).pdf
Data: 6/28/2012
Dimensioni del file: 1.39 MB
Guida rapida per l'installazione
Nome del file: EN_QIG_TEW-632BRP.pdf
Data: 9/26/2007
Dimensioni del file: 596.91 KB
Nome del file: FR_QIG_TEW-632BRP.pdf
Data: 9/26/2007
Dimensioni del file: 599.36 KB
Nome del file: GE_QIG_TEW-632BRP.pdf
Data: 9/26/2007
Dimensioni del file: 598.63 KB
Nome del file: PO_QIG_TEW-632BRP(A1.1R).pdf
Data: 8/7/2008
Dimensioni del file: 971.62 KB
Nome del file: SP_QIG_TEW-632BRP.pdf
Data: 9/26/2007
Dimensioni del file: 598.63 KB
Nome del file: RU_QIG_TEW-632BRP.pdf
Data: 9/26/2007
Dimensioni del file: 1.16 MB
Nome del file: EST_QIG_TEW-632BRP.pdf
Data: 3/21/2008
Dimensioni del file: 585.89 KB
Nome del file: Latvian_QIG_TEW-632BRP.pdf
Data: 5/16/2013
Dimensioni del file: 891.05 KB
Guida per l'utente
Nome del file: UG_TEW-632BRP.pdf
Data: 9/26/2007
Dimensioni del file: 3.91 MB
Immagine/i del prodotto
WPA(2)-PSK Example
Authentication type: WPA
PSK/EAP: PSK
Cipher Type: TKIP
Passphrase: 0123456789abcdef
Confirm passphrase: 0123456789abcdef
The key must be between 8~63 digits or 64 HEX characters.
Step 1 Log into the TEW-632BRP by entering its IP address into a browser. The default IP a...
No, you can not replace the antenna on the unit with a high gain antenna.
Step 1 Your computer must have a TRENDnet 802.11n wireless adapter installed (e.g. TEW-621PC, TEW-623PI, TEW-624UB).
Step 2 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin.
St...
Step 1 Log into the router by entering its IP address into a browser. The
default IP address is https://192.168.10.1.
The default username is admin with a password of admin.
Step 2 Click on "Main" on the left hand side then click on "LAN&DHCP Server".
Step 3 Change the IP Address to be ...
Step 1: Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. In an indoor environment try to position the wireless devices so that the signal pas...
Step 1 Log into the TEW-632BRP by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username and password are both "admin".
Step 2 Click on "Main" on the left hand side then click on "Password".
...
The EasyGo setup will only work on a Windows PC. If you want to setup the router from a non-Windows PC or if you receive an error message,
Step 1 Connect an Ethernet cable from your modem to the WAN port on the router.
Step 2 Connect a second Ethernet cable from your computer to one of the 4 L...
Step 1: Click the Microsoft Windows icon and then click "Computer".
Step 2: Right click on the CD-ROM/DVD-ROM drive and click Open.
Step 3: Right click on autorun.exe and click Run as administrator.
Step 4: Repeat the steps in the QIG.
...
You would connect to it like a standard wireless network. You will be prompted for the key that was generated during the WPS connection process. You can verify the key by following the steps below:
Step 1 Log into the router by entering its IP address into a browser. The
default IP address is htt...
Step 1 Press the WPS button located on the right side of the TEW-632BRP. The
button will start to blink indicating that it is ready for a WPS enabled computer
to connect.
Step 2 Press the PBC (Push Button Connect) button in your wireless adapter's
utility.
Example using a TEW-621PC wireles...
How do I forward ports, create pin holes in the firewall or create Virtual Servers in my TEW-632BRP?
For Well Known Ports
Log into the router by entering its IP address into a browser. The default
IP address is https://192.168.10.1. At the
login, enter your username (admin) and password (admin).
Click on "Cancel" if the Setup Wizard comes up.
Click on "Access" on the left hand side.
...
WPA-PSK/WPA2-PSK Example
Authentication type:WPA
PSK/EAP: PSK
Cipher Type: TKIP
Passphrase: 0123456789abcdef
Confirm passphrase: 0123456789abcdef
The key must be between 8~63 digits or 64 HEX characters.
Step 1 Log into the TEW-632BRP by entering its IP address into a browser.
The defau...
Step 1 Log into the TEW-632BRP by entering its IP address into a browser.
The default IP address is https://192.168.10.1.
The default username and password are both "admin". ...
Step 1 Log into the TEW-632BRP by entering its IP address into a browser.
The default IP address is https://192.168.10.1.
The default username and password are both "admin".
Step 2 Click "Main" on the left hand side then click on "LAN & DHCP Server".
Step 3 Enter in the new value for IP Add...
The default IP address is https://192.168.10.1.
The default username and password are both "admin". ...
Go to our website and check for available firmware updates here.
https://www.TRENDnet.com/support/supportdetail.asp?prod=140_TEW-632BRP#tabs-solution01
>
Firmware upgrade failure may permanently damage the
unit and causing it not to function. If the issues in the "Release Notes" do
not addre...
Power up the TEW-632BRP, wait 30 seconds for it to boot up, press and hold the reset button for 15 seconds and then release it. Do not press and hold the reset button for more than 30 seconds.
...
| Hardware | |
| Standards |
|
|---|---|
| WAN | 1 porta 10/100Mbps Auto-MDIX (Internet) |
| LAN | 4 porta 10/100Mbps Auto-MDIX |
| WPS Tasto | WPS Configurazione |
| Tipo di collegamento | IP Dinamico, Statico (Fisso) IP, PPPoE, PPTP, L2TP, BigPond |
| UPnP | UPnP IGD 1.0 Conforme |
| DMZ | DMZ host & Virtual Servers |
| DNS | Server con DNS statico o WAN assegnato; 3 servizi verificati per DDNS |
| Controllo dell'Accesso a Internet | Filtro indirizzo MAC, Filtro Dominio/URL, Filtro Protocollo/IP |
| Logging | 5 tipi di logging report via email |
| Indicatore LED | Alimentazione, LAN1~LAN4, WAN, WLAN |
| Alimentatore di corrente | 5V DC, Alimentatore esterno 2,5A |
| Consumo elettrico | 7W |
| Dimensioni | 195 x 120 x 30 mm (7.7x 4.7 x 1.1 pollici) |
| Peso | 335g (0.7 lb) |
| Temperatura |
|
| Umidità | Max. 90% (senza condensa) |
| Certificazione | CE, FCC |
| Senza Fili | |
| Frequenza | 2412~2484MHz ISM Banda |
| Antenna | 2 antenne dipolo staccabili 2dBi |
| Protocollo di accesso media | CSMA/CA con ACK |
| Tasso Dati |
|
| Sicurezza |
|
| Potere dell'uscita |
|
| Sensibilità di ricezione |
|
| Canali | 1~ 11 (US), 1~13 (EU) |
CONTENUTO DELLA CONFEZIONE |
|
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.
