Router firewall gigabit 4 porte
TWG-BRF114 (Version 1.0R)
- godi di velocità di rete gigabit
- firewall con protezione avanzata (NAT, NAPT & SPI)
- gestione a distanza sicura
- interfaccia di gestione intuitivo
DISCONTINUED PRODUCT
The TWG-BRF114 (Version 1.0R) has been discontinued. It has been replaced by the TWG-431BR (Version v1.0R). For a list of discontinued products, click here.Firmware
Firmware Version: 1.0.0.6
Date: 10/2010
Notes:
- Resolved an issue related to logging out from the Virtual Server page.
- Resolved DHCP reservation issue.
Nome del file: FW_TWG-BRF114_V1(1.0.0.6).zip
SHA-1 Checksum: 8D84CC5F786C1342F5FD74B31D205F8698B8D745
Data: 7/28/2017
Dimensioni del file: 620.35 KB
Scheda tecnica
Nome del file: EN_Spec_TWG-BRF114(V1.0R).pdf
Data: 12/20/2007
Dimensioni del file: 409.84 KB
Nome del file: FR_Spec_TWG-BRF114(V1.0R).pdf
Data: 12/20/2007
Dimensioni del file: 415.00 KB
Nome del file: GE_Spec_TWG-BRF114(V1.0R).pdf
Data: 12/20/2007
Dimensioni del file: 416.43 KB
Nome del file: SP_Spec_TWG-BRF114(V1.0R).pdf
Data: 12/20/2007
Dimensioni del file: 413.97 KB
Nome del file: RU_Spec_TWG-BRF114(V1.0R).pdf
Data: 12/20/2007
Dimensioni del file: 800.64 KB
Guida rapida per l'installazione
Nome del file: EN_QIG_TWG-BRF114.pdf
Data: 11/26/2007
Dimensioni del file: 639.97 KB
Nome del file: FR_QIG_TWG-BRF114.pdf
Data: 11/26/2007
Dimensioni del file: 642.50 KB
Nome del file: GE_QIG_TWG-BRF114.pdf
Data: 11/26/2007
Dimensioni del file: 643.33 KB
Nome del file: PO_QIG_TWG-BRF114.pdf
Data: 9/24/2008
Dimensioni del file: 491.57 KB
Nome del file: SP_QIG_TWG-BRF114.pdf
Data: 11/26/2007
Dimensioni del file: 644.54 KB
Nome del file: RU_QIG_TWG-BRF114.pdf
Data: 11/26/2007
Dimensioni del file: 980.15 KB
Guida per l'utente
Nome del file: UG_TWG-BRF114.pdf
Data: 11/26/2007
Dimensioni del file: 1.90 MB
Immagine/i del prodotto
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.
Put a check mark in the Enable box. Rename the servic...
The MAC Address can be found on a label on the bottom of the router. You can alternately find it by doing the following:
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and pas...
Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight settings then click on the Control Panel.
Double-Click on the Network Connection icon.
Right-Click on the Local Area Connection icon then click on Properties.
Highlight the Internet Protocol (TCP/I...
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.
Click on LAN on the left hand side.
Change the IP addre...
The default username & password for the TWG-BRF114 are both (blank). There is no username and password set by default....
The default IP address for the TW100-BRF114U is 192.168.0.1.
Locate the reset button on the back of the TWG-BRF114.
Press and hold in the reset button for approximately 15 seconds. This will reset the unit back to its default configuration.
...
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.
Click on Password on the left hand side.
Enter in t...
Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address.
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). ...
Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.
Click on WAN Port on the left hand side.
Choose PPPoE f...
| Hardware | |
| Standards | IEEE 802.3, 802.3u e 802.3ab |
| Protocolli | NAT, PPPoE, HTTP, DHCP, TCP/IP, UDP, PAP, CHAP, RIP1 e DDNS |
| Firewall | NAT, Stateful Packet Inspection, Attack Alert Email e Log e Denial of Service |
| Sicurezza | Access Control |
| Porta locale | 4 porta RJ45 Auto-MDI/MIDX Ethernet Gigabit 10/100/1000Mbps |
| Porta internet | 1 porta RJ45 schermata auto-MDI/MIDX Ethernet gigabit 10/100/1000Mbps |
| Pulsante reset | Ripristina le impostazioni di fabbrica |
| LEDs | Alimentazione, Stato, Link/Act, 10 ,100 ,1000 LAN e WAN |
| Alimentazione | Adattatore d'alimentazione esterno 800mA |
| Dimensioni (LxWxH): | 141 x 100 x 27 mm (5.5x 3.9 x 1.06 pollici) |
| Peso | 363g (12.8 oz.) |
| Temperatura |
|
| Umidità |
|
| Certificazione | CE |  |
CONTENUTO DELLA CONFEZIONE |
|
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.
