Note di emissione
Version: 2.0.5
OS Compatibility: Windows 10/11 64-bit
Important Note: Please uninstall any previous versions of the TRENDnet AP and TRENDnet Management software utilities before installing this software utility. - Added compatibility for both specific Hive cloud supported access point and web smart switches devices
- Added batch multi-device Hive cloud registration feature
Nome del file: TRENDnet_Management_Utility(2.0.5).zip
SHA-1 Checksum: 3C8C4215DF5C530F5A27F0FF774BB2526E8D7860
Data: 3/18/2024
Dimensioni del file: 69.05 MB
Firmware Version: v3.01.027
Release Date: 3/2024
Note:
Nome del file: TEG-284WS_FW_3.01.027.zip
SHA-1 Checksum: 1DDF149BB267DA0BE3D0088F0E7D7EB863191D8E
Data: 3/6/2024
Dimensioni del file: 12.35 MB
Firmware Version: v3.01.025
Release Date: 07/2023
Note:
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first, then firmware version 2.10.024 afterwards. (Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *
Fixes
- Fixed PoE Utilization table
Nome del file: FW_TEG-284WS_fw_3.01.025.zip
SHA-1 Checksum: 51E37C968FEE70455CCBBB92B421D72FF661CBFA
Data: 7/21/2023
Dimensioni del file: 12.34 MB
Firmware Version: v3.01.012
Release Date: 08/2021
Note:
* This download includes Firmware version 3.0.012, Firmware version 2.10.024 and Firmware version 1.10.026.
** If your firmware version is between firmware version 1.00.xx 1.00.023, please install firmware version 1.10.026 before upgrading to firmware version 2.10.024.
***If your firmware version is between firmware version 2.0.xx to 2.10.011, please install firmware version 2.10.024 first before upgrading to firmware version 3.01.012
If it is the first time upgrading the switch from 1.00.010 to 2.10.010 or above, it is recommended to manually reset the device to factory default and clear web browser cache after the loading firmware file.
- New GUI
- Add Ping Watchdog feature
- Adds Cloud enabled feature (TRENDnet Hive)
- Adds capability to backup, copy, restore config functions on Hive
- Adds capability to configure additional QoS functions
- Sync time settings from Hive
- Bug Fixes
Nome del file: TEG-284WS_3-01-012.zip
SHA-1 Checksum: 3C2E0C0D5D9686511A697238596E801434513A68
Data: 5/5/2022
Dimensioni del file: 33.14 MB
Version: 3.00.002
Release Date: 3/2022
Note: - Added auto firmware upgrade feature
Nome del file: MIB_TEG-284WS_v1(3.00.002).zip
Data: 3/10/2022
Dimensioni del file: 111.65 KB
Nome del file: EN_datasheet_TEG-284WS_(v1.5R).pdf
Data: 4/27/2022
Dimensioni del file: 466.23 KB
Nome del file: FR_datasheet_TEG-284WS_(v1.5R).pdf
Data: 4/27/2022
Dimensioni del file: 467.92 KB
Nome del file: GE_datasheet_TEG-284WS_(v1.5R).pdf
Data: 4/27/2022
Dimensioni del file: 469.03 KB
Nome del file: PO_datasheet_TEG-284WS_(v1.5R).pdf
Data: 4/27/2022
Dimensioni del file: 470.43 KB
Nome del file: SP_datasheet_TEG-284WS_(v1.5R).pdf
Data: 4/27/2022
Dimensioni del file: 463.58 KB
Nome del file: IT_datasheet_TEG-284WS_(v1.5R).pdf
Data: 4/27/2022
Dimensioni del file: 467.26 KB
Nome del file: TRENDnet_Hive_User_Guide_08172021.pdf
Data: 10/6/2021
Dimensioni del file: 2.45 MB
Nome del file: Web_Smart_Switch_Series_User_Guide_11122020.pdf
Data: 1/11/2021
Dimensioni del file: 4.13 MB
PNG Image
Dimensioni del file: : 1.19 MB
Data: : 9/17/2021
PNG Image
Dimensioni del file: : 868.46 KB
Data: : 9/17/2021
PNG Image
Dimensioni del file: : 767.21 KB
Data: : 9/17/2021
You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
Only managed or web smart PoE Switches will have reset instruction. Unmanaged PoE Switches are not configurable and do not have settings to reset. Your Switch will have a reset button. This button is typically recessed and located on the front or the back of the Switch. You will need a small pin or ...
A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
Standards | - IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3az
|
---|
Interfaccia dispositivo | - 24 x porte Gigabit
- 4 x Porte Gigabit condivise (RJ-45/SFP)
- Indicatori LED
|
---|
Velocità trasferimento dati | - Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit Ethernet: 2000Mbps (full duplex)
|
---|
Prestazione | - Matrice di commutaizone: 56 Gbps
- Memoria tampone RAM 512KB
- MAC Address Table: 8K voci
- Jumbo Frame: 10KB
- HOL Blocking Prevention
- Velocità invio: 41,7Mpps (dimensione pacchetto 64-byte)
|
---|
Gestione | - HTTP/HTTPS (SSL v2/3 TLS) GUI basata su Web
- SNMP v1, v2c, v3
- RMON v1
- Static Unicast MAC Address
- Abilitazione/disabilitazione risparmio energia 802.3az
- LLDP e LLDP-MED
- Test diagnostico Cavo Virtuale
- IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configurazione
|
---|
Hive Cloud Management | - Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser
- Multi-device management
- Provisioning through scheduled batch firmware or configuration updates for multiple switches
- Event/hardware network monitoring (CPU/memory utilization)
- Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
|
---|
MIB | - 1354 RFC MIB SCHEDA AVANZAMENTO IP
- 1271 RFC MIB RMON
- 1213 RFC MIB IPV4
- 2465 RFC MIB IPV6
- VLAN-Q 802.1 IEEE MIB GVRP
- Ad802.3 IEEE MIB LA
- AB802.1 IEEE MIB LLPD
- 2933 RFC MIB SNOOPING IGMP
- 3019 RFC MIB SNOOPING MLD
- Q802.1 IEEE MIB VLAN PRIVATO
- 2026 RFC MIB DHCPSNOOP
- 43213 RFC MIB QOS
- 3415 RFC MIB SNMP
- 4318 RFC MIB STP
- 802.1X IEEE MIB PNAC
- Q802.1 IEEE MIB VLAN
- 1611 RFC MIB DNS
- MIB ACL
- MIB CTRL AMPIEZZA DI BANDA
- MIB LBD
- MIB MIRROR
- MIB NEIGHBOR IPV6
- MIB SNTP
- MIB CTRL STORM
- STATISTICHE MIB
- Strumento MIB
- MIB VLAN VOCALE
- MIB DOS
|
---|
Spanning Tree | - IEEE 802.1D STP (Protocollo Spanning Tree)
- IEEE 802.1w RSTP (protocollo rapid spanning tree)
- IEEE 802.1s MSTP (protocollo multiple spanning tree)
|
---|
Link Aggregation | - Static Link Aggregation
- 802.3ad Dynamic LACP
|
---|
Quality of Service (QoS) | - 802.1p Class of Service (CoS)
- (Punto Codice Servizi Differenziati) DSCP
- Controllo larghezza di banda per porta
- Programmazione della coda: Strict Priority, Weighted Round Robin (WRR)
|
---|
VLAN | - Assegnazione di VLAN di gestione multiple
- VLAN asimmetrica
- 802.1Q Tagged VLAN
- Dynamic GVRP
- Fino a 256 gruppi VLAN , intervallo ID 1-4094
- VLAN privata (porte protette)
- VLAN voce (10 OUI definiti dall'utente)
|
---|
Multicast | - IGMP Snooping v1, v2, v3 (per VLAN)
- Indirizzi multicast statici
- Fino a 256 voci multicast
|
---|
Port Mirror | - RX, TX od entrambe
- Corrispondenza univoca
|
---|
Cifratura | - Controllo Accesso di rete Porta di base 802.1X, RADIUS, TACACS+
- Autenticazione locale di utente Dial In
- DHCP Snooping (per VLAN)
- Rilevamento loopback
- Rilevamento duplicazione indirizzo
- Trusted Host
- Denial of Service (DoS)
|
---|
ACL IPv4 L2-L4 & IPv6 | - MAC Address
- VLAN ID
- Ether Type (soltanto IPv4)
- Protocolli IP 0-255
- Porte TCP/UDP 1-65535
- 802.1p
- DSCP (soltanto IPv4 )
- Indirizzo IPv6 (soltanto IPv6)
|
---|
Compatibilità | - Utility Software Opzionale: Server Windows® 10, 8.1, 8, 7, Vista, XP, Windows® 2003/2008
|
---|
Caratteristiche speciali | - Design senza ventole
- IPv6
- Risparmio energetico 802.3az
- Montabile a rack
|
---|
Energía | - Ingresso: 100 – 240 V AC, 50/60 Hz, alimentatore interno
- Consumo: 17.3 W (max.)
|
---|
MTBF | |
---|
Temperatura in esercizio | |
---|
Umidità in esercizio | |
---|
Dimensioni | - 440 x 140 x 44mm (17.4 x 5.51 x 1.74 pollici)
- Montaggio a rack 1 unità
|
---|
Peso | |
---|
Certificazioni | |
---|
Garanzia | |
---|
CONTENUTO DELLA CONFEZIONE |
- TEG-284WS
- Guida di installazione rapida
- CD-ROM (Utility e guida utente)
- Cavo di alimentazione (1,8m / 6 ft)
- Staffe per il montaggio a rack
|
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.
Non disponibile in Europa