Videocamera IP day/night Megapixel HD PoE da esterno
TV-IP322P (Version v1.0R)
- Campo di visione stretto per monitoraggio su lunghe distanze
- Visione in notturna a distanze fino a venti metri (66 piedi)
- Pronta per l'installazione all'esterno con protezione IP66 dagli agenti atmosferici
- Risoluzione megapixel H.264 fino a 1280 x 1024
- Registrazione in base al rilevamento di movimento e allarmi e-mail con il software supplementare
- Program motion detection recording and email alerts with complimentary software
Utilità
Nome del file: SecurViewPro(2.0.0.0_20110418).zip
SHA-1 Checksum: C52595DDC53C6E6B86D81C8B53E8E5C432BE29F7
Data: 7/26/2017
Dimensioni del file: 76.92 MB
Nome del file: Utility_IPSetup.zip
SHA-1 Checksum: 522A5EDEE64F05C59240326AD6FA3AB7F0C24A74
Data: 7/26/2017
Dimensioni del file: 700.00 KB
Drivers/Utilità
Web plug-in for MAC OS
Release Date: 07/2018
Release Note:
Release Date: 07/2018
Release Note:
- Updated latest Mac OS 10.12 support
Nome del file: Mac_Plugin.zip
SHA-1 Checksum: 52A5EC411C0FC29CF41C3557E08437EA83AE5B16
Data: 7/31/2018
Dimensioni del file: 3.66 MB
Firmware
NON aggiornare il firmware di un prodotto TRENDnet mediante connessione wireless. L'aggiornamento del firmare mediante connessione wireless può danneggiare il prodotto. Eseguire l'aggiornamento del firmware solo con connessione di rete cablata. |
Firmware Version: 1.0.4
Release Date: 9/2014
Notes:
- Support Java Applet
- Fixed Active X issue.
Note:
- Please do not save the camera's configuration file from the old firmware and restore it after the firmware upgrade.
- After a successful firmware upgrade, please reset the camera to factory default and reconfigure the camera. We strongly recommend that you change the camera's administrator's account password.
Nome del file: FW_TV-IP322P(1.0.4).zip
SHA-1 Checksum: 90005BEC17DFFC3F91EDBBDD15C806B12BBF64FD
Data: 10/1/2021
Dimensioni del file: 5.06 MB
Software
Version 1.10.0
Product InformationNome del file: TRENDnetView_EVO__x64_1.10.0.zip
SHA-1 Checksum: 2B5BD0BFFF960D487E4ADFC1130AE0B64220A986
Data: 8/2/2018
Dimensioni del file: 367.72 MB
Version 1.10.0
Product InformationNome del file: TRENDnetView_EVO__x86_1.10.0.zip
SHA-1 Checksum: 2963E3F4127E318913ABCDA69CB347364CB39448
Data: 8/2/2018
Dimensioni del file: 261.77 MB
Scheda tecnica
Nome del file: EN_spec_TV-IP322P(v1.0R).pdf
Data: 3/18/2014
Dimensioni del file: 1.45 MB
Nome del file: FR_spec_TV-IP322P(V1.0R).pdf
Data: 3/18/2014
Dimensioni del file: 1.49 MB
Nome del file: GE_spec_TV-IP322P(V1.0R).pdf
Data: 3/18/2014
Dimensioni del file: 1.50 MB
Nome del file: PO_spec_TV-IP322P(V1.0R).pdf
Data: 3/18/2014
Dimensioni del file: 1.47 MB
Nome del file: SP_spec_TV-IP322P(v1.0R).pdf
Data: 3/18/2014
Dimensioni del file: 1.47 MB
Nome del file: RU_spec_TV-IP322P(v1.0R).pdf
Data: 3/18/2014
Dimensioni del file: 1.46 MB
Nome del file: IT_spec_TV-IP322P(v1.0R).pdf
Data: 3/18/2014
Dimensioni del file: 1.48 MB
Guida rapida per l'installazione
Nome del file: EuropeanQIG_TV-IP322P(V1.0R).pdf
Data: 4/4/2013
Dimensioni del file: 1.72 MB
Nome del file: QIG_TV-IP322P(V1.0R).pdf
Data: 4/4/2013
Dimensioni del file: 6.42 MB
Nome del file: FR_Web_TV-IP322P(1.01).pdf
Data: 8/9/2012
Dimensioni del file: 3.34 MB
Nome del file: GE_Web_TV-IP322P(1.01).pdf
Data: 5/4/2011
Dimensioni del file: 2.80 MB
Nome del file: PO_Web_TV-IP322P(1.01).pdf
Data: 5/4/2011
Dimensioni del file: 2.70 MB
Nome del file: SP_Web_TV-IP322P(1.01).pdf
Data: 5/4/2011
Dimensioni del file: 2.80 MB
Nome del file: RU_Web_TV-IP322P(1.01).pdf
Data: 5/4/2011
Dimensioni del file: 3.89 MB
Nome del file: EST_Web_TV-IP322P(1.01).pdf
Data: 5/4/2011
Dimensioni del file: 2.49 MB
TrendnetVIEW App Guida rapida per l'installazione
Nome del file: TRENDnetVIEW_App_(iOS).pdf
Data: 6/24/2014
Dimensioni del file: 1.90 MB
Nome del file: TRENDnetVIEW_App_(Android).pdf
Data: 6/24/2014
Dimensioni del file: 1.90 MB
Guida per l'utente
Nome del file: UG_TV-IP322P(v1).pdf
Data: 4/4/2013
Dimensioni del file: 7.72 MB
Immagine/i del prodotto
OverviewPlease ensure you have followed the quick installation guide and have the camera setup and accessible on your home/office network. The following instructions are going to outline how to make a SecurView camera accessible over the Internet. We will start by assigning a unique static IP addres...
The Secure Digital card will allow you to save video to it on motion detected events only.
Log in to the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Click Setup then go to the...
Yes, they can be disabled. Log in to the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Click on Setup and then go to the Basic>System page. The IR LED control can be set to "...
Yes, log into the camera and click on Setup then click on Event Server>Network Storage on the left hand side. Enter your Samba server information here.
After applying the Samba server information click on Event Config on the left hand side. You have two options, Motion Detection and Schedu...
The camera must be configured properly to have Internet access. This includes making sure you have entered a valid default gateway address for the camera and valid DNS server entries to ensure it can resolve names. ...
By default the camera uses TCP port 80. Forward this port in your router or firewall to the camera.
Unfortunately SecurView Pro is not compatible with Macintosh operating systems.
The camera's web configuration page can be reached by entering its IP address into a web browser. For example, if the IP address is 192.168.10.30 you would access it by opening Internet Explorer and entering https://192.168.10.30 into the address line....
The camera by default is configured to receive an IP address via DHCP. If it is unable to receive an IP address via DHCP it will default to 192.168.10.30. You can use the IP Setup Utility to find and change the IP address of the camera as well.
...
Start the SecurView Pro application and login. The default username and password are both "admin".
Click on Device > Device Setting
Select the camera and click modify
Click the Motion Detection Area button
Define your motion detection areas. You have three areas you ca...
Download the latest firmware from https://www.TRENDnet.com/downloads/. Detailed firmware update instruction are included with the download. ...
Log into the camera and click on Setup then click on Event Server>Email on the left hand side. Enter your email server and user information here.
Log into the camera and click on Setup then click on Event Server>FTP on the left hand side. Enter your FTP server information here.
After applyi...
Log into the camera and click on Setup then click on Event Server>FTP on the left hand side. Enter your FTP server information here.
After applying the FTP server information click on Event Config on the left hand side. You have two options, Motion Detection and Scheduled uploading. You also ha...
After you have the camera configured on your network start SecurView Pro. The default username and password for SecurView Pro are both "admin".
Click on the "Device" button then click "Device Settings".
Click New.
Click on the "Device Search" button.
Click Search. Sel...
The supported browsers are Internet Explorer 6.0 or above.
Remove the front cover of the TV-IP322P then press and hold in the reset button indicated below for approximately 10 seconds.
...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Once you have logged into the camera do the following.
-Click Setup
-Click Basic>User
You can define t...
Yes, the camera does support DDNS (Dynamic DNS). Dynamic DNS services will allow you to maintain a single hostname for the camera, even if your ISP changes your WAN IP address. The camera will update the DDNS record to reflect the new IP address. This ensures that each time you go to the hostn...
You will need to forward the port that the camera is using in the router to the camera. By default this is TCP port 80. From a remote location you would enter in the public or WAN IP address of your router into your browser or add it to SecurView Pro using the public IP address.
Refer to your rout...
| Videocamera | |
| Informazioni generali |
|
|---|---|
| Imaggini & Video |
|
| Audio |
|
| Pan/Tilt/Zoom |
|
| Posizioni preimpostate:32 |
|
| GPIO |
|
| Lettore SD |
|
| Hardware | |
| Rete |
|
| Esposizione di LED |
|
| Lunghezza d'onda degli infrarossi |
|
| Alimentazione su Ethernet (PoE) |
|
| Pulsante reset |
|
| Consumo elettrico |
|
| Alimentazione |
|
| Dimensioni |
|
| Peso |
|
| Condizioni di funzionamento |
|
| Certificazioni |
|
| Requisiti | |
| Interfaccia di gestione |
|
| Per eseguire TRENDnetVIEW |
|
| TRENDnetVIEW |
|
| Protocolli di rete |
|
| Gestione | |
| Remota |
|
| Backup/Restore |
|
| Impostazioni | |
| Immagine |
|
| Video |
|
| Memorizzazione |
|
| Gestione eventi |
|
| QoS |
|
| Regolazione Porte |
|
| Zoom Digitale |
|
| DNS dinamico |
|
| Tempo |
|
| SMTP |
|
| Log sistema |
|
CONTENUTO DELLA CONFEZIONE |
|
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.
