skip to main content

N300 Wireless Hot Spot Access Point

TEW-636APB   (Version V1.0R)

  • 12x the speed and 6x the coverage of wireless g
  • Advanced wireless antenna technology (MIMO) boosts wireless range and eliminates dead spots
  • Functional Access Point and WDS Bridge modes provide network flexibility

DISCONTINUED PRODUCT

The TEW-636APB (Version V1.0R) has been discontinued. It has been replaced by the TEW-821DAP (Version v2.5R). For a list of discontinued products, click here.

Firmware

NÃO atualize firmware em nenhum produto da TRENDnet utilizando conexão wireless
Atualização de firmware sobre conexão wireless pode causar dano ao produto. Por favor execute a atualização de firmware somente com conexão cabeada.

Firmware Version: v1005
Release Date: 11/17/2008
Release Note:
  • Add DHCP Client
  • Improved wireless connection

Nome do arquivo: FW_TEW-636APB_v1.x(1.0.0.5).zip
SHA-1 Checksum: 62E9D349445998676CFD01FDDD3DF0C3339042A4
Data: 7/26/2017
Tamanho de arquivo: 3.16 MB

Ficha técnica

Nome do arquivo: EN_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Tamanho de arquivo: 476.05 KB
Nome do arquivo: FR_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Tamanho de arquivo: 482.13 KB
Nome do arquivo: GE_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Tamanho de arquivo: 482.09 KB
Nome do arquivo: SP_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Tamanho de arquivo: 481.25 KB
Nome do arquivo: RU_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Tamanho de arquivo: 1.51 MB
Nome do arquivo: ITA_Spec_TEW-636APB(V1.0R).pdf
Data: 9/17/2008
Tamanho de arquivo: 475.45 KB

Guia de Instalação Rápida

Nome do arquivo: EN_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Tamanho de arquivo: 835.96 KB
Nome do arquivo: FR_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Tamanho de arquivo: 857.56 KB
Nome do arquivo: GE_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Tamanho de arquivo: 880.84 KB
Nome do arquivo: PO_QIG_TEW-636APB(V1.0R).pdf
Data: 7/7/2008
Tamanho de arquivo: 816.49 KB
Nome do arquivo: SP_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Tamanho de arquivo: 840.60 KB
Nome do arquivo: RU_QIG_TEW-636APB(V1.0R).pdf
Data: 6/4/2008
Tamanho de arquivo: 1.53 MB

Guia do Usuário

Nome do arquivo: UG_TEW-636APB.pdf
Data: 6/13/2008
Tamanho de arquivo: 13.26 MB

Imagem(ns) do Produto

JPEG Image
Tamanho de arquivo: : 1.14 MB
Data: : 6/4/2008
JPEG Image
Tamanho de arquivo: : 357.94 KB
Data: : 6/4/2008
JPEG Image
Tamanho de arquivo: : 338.13 KB
Data: : 6/4/2008
TIFF Image
Tamanho de arquivo: : 3.81 MB
Data: : 6/4/2008
TIFF Image
Tamanho de arquivo: : 4.31 MB
Data: : 6/4/2008
TIFF Image
Tamanho de arquivo: : 4.12 MB
Data: : 6/4/2008
ROHS compliant WEEE crossed-out bin symbol.
The TEW-636APB can support up to 32 wireless client connections per one Access Point.
No, no software or utility is required to allow this product to work. The TEW-636APB is completely ready to use out of the box (Note: please refer to Quick Installation Guide that is included with this product)....
When using the TEW-636APB from time to time you may experience issues with wireless signal loss or no signal, this is due to environmental conditions in and out of any structure or objects in the way. Since wireless is based on line of sight. The wireless signals do not pass through objects, walls o...
No, the Internet works independently from the wireless Access Point and Local Area Network (LAN). Your Internet Service Provider controls your Internet speed. ...
Yes, the TEW-636APB is fully compatible with WDS. In the AP Modes; you can add additional Access Point(s) to extend your coverage of your wireless network. (Note: AP Modes will support the use of wireless b/g/n to extend the wireless LAN. The use of multiple Access Points will reduce the overall net...
Yes, the TEW-636APB allows you to create up to three additional virtual SSIDs (Wireless Network Name) to connect with. Multiple Service Set Identifiers (SSID) allow the ability to create virtual wireless networks while only using one wireless Access Point device as the main connecting point. Create ...
The TEW-636APB supports the following security for wireless networks, WEP, WPA/WPA2, WPA/WPA2 Enterprise, Wireless MAC filtering, and WiFi Protected Setup (WPS)....
Yes, the TEW-636APB is fully compatible with existing 802.11b/g/n wireless networking devices.
The TEW-636APB has two built in wireless radios for transmitting and receiving at the same time.
Rogue AP detection is a security feature that will let you know if someone has connected an Access Point that is not authorized or belong to your current LAN. Once configured, this feature can monitor your wireless network for any new Access Points operating in your WLAN. Once detected, you can add ...
Virtual LAN, a network of computers that behave as if they are connected to the same wired network even though they may actually be physically located on different parts on a LAN. The TEW-636APB allows you to create VLAN to separate wireless client from each other while connecting to the same TEW-63...
802.11d (worldwide mode) is a wireless network communications specification for use in countries where systems using other standards in the 802.11 variations are not allowed to operate. This will allow the TEW-636APB to communicate in countries where there are different restrictions on wireless radi...
Yes, the user settings can be safely stored off the TEW-636APB and re-applied to the device in the event of updating the firmware or restoring the device default settings....
Here are minimum operating requirement for the TEW636APB: Web Browser: Internet Explorer (5.5 or higher) A computer with a network adapter or wireless adapter properly installed. DHCP Server A RJ-45 network cable. TEW-621PC version 2 or TEW-623PI version 2 (Optional) ...
Open your web browser, type https://SCXXXXXX, in the Address bar, and then press Enter. XXXXXX represents the last 6 digits of the Mac Address. You can find the Mac Address on the bottom of the router. ...
Hardware
Standards Wired: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX) Wireless: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Interface 1 x 10/100Mbps Auto-MDIX LAN Port
Reset Button Reset to Factory Default Settings
Config Button Reserved for WPS function use
LED Indicator WPS, Power, WLAN, Status
Power Adapter 12V DC, 1A External Power Adapter
Dimension (L x W x H) 180 x 122 x 30 mm (6.8 x 4.6 x 1.1 inches)
Weight 320g (0.7 lbs)
Temperature Operation: 0°~ 40°C (32°F~ 104°F) Storage: -20°~ 60°C (-4°F~140 °F)
Humidity Max. 90% (Non-Condensing)
Certification CE, FCC
Wireless
Frequency
  • 2.412 - 2.462 GHz (FCC)
  • 2.412 - 2.472 GHz (ETSI)
Module Technique
  • 802.11n: BPSK, QPSK, 16QAM, with OFDM OFDM;
  • 802.11b: CCK (11 Mbps, 5.5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps)
Antenna 3 x 2dBi detachable dipole antennas
Media Access Protocol CSMA/CA with ACK
Data Rate
  • 802.11b: 11Mbps, 5.5Mbps, 2Mbps, and 1Mbps
  • 802.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps and 6Mbps
  • 802.11n (draft 2.0): up to 300Mbps
Security Encryption: Hardware AES/TKIP, 64/128-bit WEP (Hex)
802.1X/EAP: WPA/WPA2/802.1X authenticator
WPA: WPA-PSK/WPA2-PSK, WPA-enterprise, WPA2-enterprise
SSID Broadcast Control
Output Power
  • 802.11b: 18dBm (typical)
  • 802.11g: 15dBm (typical)
  • 802.11n (draft 2.0: 14dBm (typical) with HT20 & HT40
Receiving Sensitivity
  • 802.11b: -84dBm (typical) @ 11mpbs
  • 802.11g: -72dBm (typical) @ 54Mbps
  • 802.11n (draft 2.0) : -70dBm (typical) with HT20 & HT40
Channels 1-11 (US) 1-13 (EU)

CONTEÚDO DA EMBALAGEM

  • TEW-636APB
  • Multi-Language Quick Installation Guide
  • CD-ROM (User's Guide)
  • Power adapter (12V DC, 1A)

Todas as referências à velocidade são apenas para fins comparativos. As especificações, tamanho e formato do produto estão sujeitos a alterações sem aviso prévio, e a aparência real do produto pode ser diferente da descrita aqui.