Gigabit PoE Splitter

TPE-104GS (Version v2.0R)

Power a non-PoE device up to 100 meters (328 ft.) away
Splits a gigabit PoE signal into separate power and gigabit data sources
Adjustable voltage output supports 5V, 9V, or 12V devices
Use this compact device with PoE switches or injectors
Save on installation and equipment cost
Full Duplex Gigabit speeds
IEEE 802.3af PoE compatible
NDAA compliant

TRENDnet's Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power and Gigabit data sources. A convenient dip-switch adjusts output power to 5V, 9V, or 12V in order to match non-PoE device power requirements. The included combination 2.0 and 2.5mm jumper cable provides greater device compatibility.

A diagram showing a PoE switch on the left with a line going to the data/power port of a Gigabit PoE Splitter. On the other side of the splitter, a line from the DC power out port goes to a camera, and another line from the Gigabit data out port also goes to the camera. This setup demonstrates how power and data are delivered from the switch to the splitter, which then separates the power and data to operate the camera.

PoE Powered

No power adapter necessary; the TPE-104GS takes a PoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328 ft.).

Adjustable Voltage Output

Convenient dip-switch adjusts voltage output to 5V, 9V, or 12V in order to match non-PoE device power requirements.

An illustration of an injector with an arrow pointing toward a wall, indicating that it can be installed on a wall.

Wall Mountable

Wall mountable design accommodates most installation scenarios.

На рисунке показано несколько видов гигабитного разветвителя PoE. На левом нижнем виде выделены гигабитный порт выхода данных, порт выхода постоянного тока и светодиодные индикаторы. На правом верхнем виде обозначены регулируемый выходной DIP-переключатель (5 В, 9 В, 12 В) и гигабитный порт передачи данных/питания.

Gigabit Ethernet

1 x gigabit PoE input port, 1 x gigabit output port

PoE Powered

No power adapter necessary; the TPE-104GS takes a PoE network connection and splits power and data into separate connections to network a non-PoE device with power up to 100m (328 ft.)

Adjustable Voltage Output

Convenient dip-switch adjusts voltage output to 5V, 9V or 12V in order to match non-PoE device power requirements

Jumper Cable

The included combination 2.0 and 2.5mm jumper cable provides greater device compatibility

Wall Mountable

Wall mountable design accommodates most installation scenarios

LED Indicators

LED indicators display DC output voltage

Standards	IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af
Device Interface	1 x Gigabit data/power port in 1 x Gigabit data out port 1 x DC Power out port LED indicators Adjustable output power DIP switch (5V, 9V, 12V)
Data Transfer Rate	Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex)
Power Cable	2.5 to 2.0/2.5mm
Power	Output: 5V (2A), 9V (2A), 12V (1.5A) Consumption: 0.5 Watts (max.)
Operating Temperature	0° – 40° C (32° – 104° F)
Operating Humidity	Max. 90% non-condensing
Dimensions	84 x 63 x 22 mm (3.3 x 2.5 x 0.87 in.)
Weight	64g (2.3 oz.)
Certifications	CE FCC
Warranty	3 year

Содержимое упаковки

TPE-104GS
Quick Installation Guide
Jumper cables (2.5 to 2.0/2.5mm)

Все значения скорости приведены только в целях сравнения. Технические характеристики, размер и форма продукта могут быть изменены без предварительного уведомления, а фактический внешний вид продукта может отличаться от описанного в настоящем документе.