skip to main content

10GBASE-SR SFP+ Multi Mode LC Module (300m with DDM)

TEG-10GBSR (Version v3.0R)

  • Hot-pluggable SFP+ transceiver
  • SFP+ MSA compliant
  • Supported throughput up to 10.5Gbps
  • Multi Mode fiber for distances up to 300m (984 ft.)
  • 850nm wavelength
  • Duplex LC connector
  • Digital Diagnostics Monitoring (DDM) support
  • Operating temperature: 0° – 70° C (32° – 158° F)
  • Single 3.3 V power supply
  • NDAA / TAA compliant (U.S. and Canada only)
NDAA/TAA Compliant

TRENDnet’s hot-pluggable 10GBASE-SR SFP+ Multi Mode LC Module, model TEG-10GBSR, works with an MSA compliant SFP+ slot. This Multi Mode transceiver spans distances up to 300m (984 ft.), comes with a LC duplex connector, and supports up to 10.5 Gbps networking throughput speeds. Digital Diagnostics Monitoring (DDM) captures critical device parameters, such as transmit/receive power, temperature, and voltage.

Diagram showing two network devices connected to each other, with three computers connected to one of the switches.

Fiber Applications

Short distance fiber networking for industrial, manufacturing, corporate, and government applications.

Illustration of a signal wave with an arrow showing direction, labeled as 300 meters (984 feet).

Fiber Mode/Distance

Multi Mode transceiver spans distances up to 300m (984 ft.) and supports up to 10.5 Gbps throughput speeds.

Illustration of a fiber module with an arrow pointing towards it, indicating placement.

Compatibility

Hot-pluggable with an MSA compliant SFP+ slot and works with fiber cables with LC-type duplex connectors.

Сетевая конфигурация с использованием коммутаторов, медиаконвертера и многорежимных LC-модулей TEG-10GBSR 10GBASE-SR SFP+. Установка демонстрирует, как соединить два коммутатора с помощью многомодового волокна на расстояниях до 300 метров (984 фута). Модули TEG-10GBSR вставляются в коммутаторы и медиаконвертер, а оптоволоконные кабели соединяют эти модули.
The TRENDnet TEG-10GBSR 10GBASE-SR SFP+ Multi Mode LC Module. The front view highlights the LC duplex connector used for fiber optic connections, while the rear view shows the electrical interface for network equipment connections.

Hot-Pluggable SFP+

Hot-pluggable SFP+ transceiver works with a MSA compliant SFP+ slot

Fiber Wavelength

Compatible with Multi Mode 850nm transmissions

Fiber Distance

Supports networking for distances up to 300m (984 ft.)

Fiber Port

LC-type duplex connector

DDM Support

Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage

Power Supply

Single 3.3 volt power supply

Operating Temperature

Rated for an operating temperature range of 0° – 70° C (32° – 158° F)

Standards

Compliant with SFF-8431, SFF-8432, SFF-8472, FC-PI-4,10G FC, and IEEE802.3ae 10GBASE-SR

Standards
  • IEEE 802.3ae
  • 10GBASE-SR
Device Interface
  • 10Gbps SFP+ MSA Compliant
  • LC duplex connector
Data Transfer Rate
  • 8.5-10.5Gbps
Wavelength
  • 850nm
Optical Output Power
  • -1 ~ -7.5dBm
Distance
  • 300m (OM3)
  • 82m (OM2)
  • 33m (OM1)
Special Features
  • Hot pluggable
  • Metal enclosure
  • DDM support
Sensitivity
  • -14 dBm
Power
  • Max. consumption: 439mW
Operating Temperature
  • 0 – 70 °C (32 - 158 °F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 14.8 x 56.5 x 11.85mm (0.6 x 2.2 x 0.5 in)
Weight
  • 22g (0.7 oz.)
Certifications
  • CE
  • FCC
Warranty
  • 3 year

Содержимое упаковки
  • TEG-10GBSR

Все значения скорости приведены только в целях сравнения. Технические характеристики, размер и форма продукта могут быть изменены без предварительного уведомления, а фактический внешний вид продукта может отличаться от описанного в настоящем документе.