4-х портовый кабельный/DSL маршрутизатор с брандмауэром и принт-сервером USB

Step 1 Go to Start>Settings>Printers>Add New Printer (WinXP - Start>Printers and Faxes>Add a Printer). Step 2 Select Local Printer. Make sure to uncheck Automatically detect and install my plug and play printer. Click Next. Step 3 Select Create a New Port and select S...

In Windows 98/Me you will need to install the LPR client. For Windows 98/ME you will also need to know the port name that you are printing to (The Port Name is L1. Installing LPR: Step 1 Once the file is downloaded and extracted, Go to Start > Settings > Control Panel > doubl...

The port name is "L1", without the quotes and it is case sensitive.

Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. Put a check mark in the Enable box. Rename the serv...

The MAC Address can be found on a label on the bottom of the router. You can alternately find it by doing the following: 1. Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (bla...

Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight settings then click on the Control Panel. 1. Double-Click on the Network Connection icon. 2. Right-Click on the Local Area Connection icon then click on Properties. 3. Highlight the Internet P...

1. Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. 2. Click on LAN on the left hand side. 3...

The default username & password for the TW100-BRF114U are both (blank). There is no username and password set by default....

The default IP address for the TW100-BRF114U is 192.168.0.1.

1. Locate the reset button on the back of the TW100-BRF114U. 2. Press and hold in the reset button for approximately 15 seconds. This will reset the unit back to its default configuration. ...

A: Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. 1. Click on Password on the left hand side. ...

A: Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address. 1. Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and pass...

Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. Click on Advanced then WAN Port on the left hand...

First, verify that the Printer LED on the TW100-BRF114U is lit. If it isn't, ensure that both your printer and the TW100-BRF114U are turned on and that the USB cable is securely connected to the connectors on both devices. Then, try bro...

Option 1: Click the Status button on the TW100-BRF114U's main configuration page. On the Status page, click the Connection Detail button. Click the Release/Renew button to allow the router to refresh the connection to your ISP. Then, try browsing a website such as https://www.TRENDnet.com again with...

You can simply contact your Internet Service Provider's (ISP) Customer Service or Technical Support Department for the correct information. ...

Please verify your hardware and TCP/IP settings again by following the instructions in sections 2-3, and make sure the Power, WAN, and the LAN lights on the AP/Router's front panel are on. Then, try accessing 192.168.0.1 again using your web browser. ...