Search FAQs
Browse by Product
FAQ Home Page > Surveillance > IP Cameras > TV-IP322P
Browse TV-IP322P Questions
There are 19 questions found in this category:

  1. How to setup the Internet Camera for Remote Viewing over the Internet
    OverviewPlease ensure you have followed the quick installation guide and have the camera setup and accessible on your home/office network. The following instructions are going to outline how to make a SecurView camera accessible over the Internet. We will start by assigning a unique static IP addres...
  2. Can I save video directly to a Secure Digital card?
    The Secure Digital card will allow you to save video to it on motion detected events only.  Log in to the camera by entering the camera's IP address into your browser.  The default IP address is https://192.168.10.30.  The default username and password are both "admin". Click Setup then go to the...
  3. Can I shut off the IR lights when not in use?
    Yes, they can be disabled.   Log in to the camera by entering the camera's IP address into your browser.  The default IP address is https://192.168.10.30.  The default username and password are both "admin". Click on Setup and then go to the Basic>System page.   The IR LED control can be set to "...
  4. Can I save video to my Network Storage Device?
    Yes, log into the camera and click on Setup then click on Event Server>Network Storage on the left hand side. Enter your Samba server information here. After applying the Samba server information click on Event Config on the left hand side. You have two options, Motion Detection and Schedu...
  5. I am unable to use the FTP and email option. When using "test" I get the message Test Failed!! Error:
    The camera must be configured properly to have Internet access. This includes making sure you have entered a valid default gateway address for the camera and valid DNS server entries to ensure it can resolve names. ...
  6. What ports do I need to open in my router or firewall to view the camera from a remote location?
    By default the camera uses TCP port 80. Forward this port in your router or firewall to the camera.
  7. Can I use SecurView Pro with a Mac?
    Unfortunately SecurView Pro is not compatible with Macintosh operating systems.
  8. How can I configure my TV-IP322P through the web-based configuration?
    The camera's web configuration page can be reached by entering its IP address into a web browser.  For example, if the IP address is 192.168.10.30 you would access it by opening Internet Explorer and entering https://192.168.10.30 into the address line....
  9. What is the default IP address of my TV-IP322P?
    The camera by default is configured to receive an IP address via DHCP. If it is unable to receive an IP address via DHCP it will default to 192.168.10.30. You can use the IP Setup Utility to find and change the IP address of the camera as well. ...
  10. How do I setup motion detected recording?
    Start the SecurView Pro application and login. The default username and password are both "admin". Click on Device > Device Setting Select the camera and click modify Click the Motion Detection Area button Define your motion detection areas. You have three areas you ca...
  11. How do I upgrade the firmware of my camera?
    Download the latest firmware from https://www.TRENDnet.com/downloads/.   Detailed firmware update instruction are included with the download. ...
  12. How do I configure my camera to email snapshots?
    Log into the camera and click on Setup then click on Event Server>Email on the left hand side. Enter your email server and user information here. Log into the camera and click on Setup then click on Event Server>FTP on the left hand side. Enter your FTP server information here. After applyi...
  13. How do I configure my camera to upload snapshots to an FTP server?
    Log into the camera and click on Setup then click on Event Server>FTP on the left hand side. Enter your FTP server information here. After applying the FTP server information click on Event Config on the left hand side. You have two options, Motion Detection and Scheduled uploading. You also ha...
  14. How do I view the TV-IP322P’s image using SecurView Pro?
    After you have the camera configured on your network start SecurView Pro. The default username and password for SecurView Pro are both "admin". Click on the "Device" button then click "Device Settings". Click New. Click on the "Device Search" button. Click Search. Sel...
  15. Which web browsers will allow me to view the video from a TV-IP322P?
    The supported browsers are Internet Explorer 6.0 or above.
  16. How do I reset my TV-IP322P back to factory defaults?
    Remove the front cover of the TV-IP322P then press and hold in the reset button indicated below for approximately 10 seconds. ...
  17. How do I set a password on my TV-IP322P and create user accounts?
    Log into the camera by entering the camera's IP address into your browser.  The default IP address is https://192.168.10.30.  The default username and password are both "admin". Once you have logged into the camera do the following. -Click Setup -Click Basic>User You can define t...
  18. Does the TV-IP322P support Dynamic DNS and what are the uses of it?
    Yes, the camera does support DDNS (Dynamic DNS).     Dynamic DNS services will allow you to maintain a single hostname for the camera, even if your ISP changes your WAN IP address.  The camera will update the DDNS record to reflect the new IP address.  This ensures that each time you go to the hostn...
  19. How can I view the TV-IP322P remotely if it’s behind a router?
    You will need to forward the port that the camera is using in the router to the camera. By default this is TCP port 80. From a remote location you would enter in the public or WAN IP address of your router into your browser or add it to SecurView Pro using the public IP address. Refer to your rout...