Gigabit PoE++ Injector

TPE-119GI (Version v1.0R)

Converts a non-PoE port to a PoE++ Gigabit port
Supplies PoE (15.4W), PoE+ (30W), or PoE++ (95W)
Integrated power supply
Network a PoE device up to 100m (328 ft.) away
Save on installation and equipment costs
IEEE 802.3af/at/bt compliant
NDAA / TAA compliant (U.S. and Canada only)

DISCONTINUED PRODUCT

The TPE-119GI (Version v1.0R) has been discontinued. It has been replaced by the TPE-119GI (Version v2.0R). For a list of discontinued products, click here.

TRENDnet's Gigabit PoE++ Injector, model TPE-119GI, is an 802.3bt PoE injector that combines electrical power with a gigabit network connection to produce a high-powered 95W PoE++ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE, PoE+, and PoE++ devices. Connect the Gigabit PoE++ injector to a non-PoE switch, and then run an Ethernet cable with data + power to network a PoE device up to 100 meters (328 ft.) away. Network PoE devices such as wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more with this 802.3btbt PoE injector.

A surveillance camera is connected to a Gigabit Ultra PoE++ Injector via a cable. The injector has two ports and a Bluetooth symbol. The cable is labeled Up to 95W and supplies power to the camera, indicated by a lightning bolt symbol.

4-Pair PoE

Supplies power to a PoE (up to 15.4W), PoE+ (up to 30W), or PoE++ (up to 95W) device.

Gigabit Ports

The PoE++ injector features 1 x gigabit port and 1 x gigabit PoE++ port.

A brick wall is on the left side with two mounting holes, one above the other. On the right side, there's a rectangular metal enclosure with ventilation holes on its side. Two screws are shown, indicating the method of attachment to the brick wall using the mounting holes.

Wall Mount Design

Wall-mount design and a sturdy metal enclosure accommodates most installations scenarios.

The illustration depicts a network setup in a lobby area. A PoE Access Point is mounted above, providing wireless connectivity. The access point is connected to a 16-Port Gigabit Switch via a data and PoE line. The switch is connected to a TPE-119GI device, which separates data and power lines. The data line connects to the switch, while the power line connects to the TPE-119GI. The lobby features people interacting at a reception desk and sitting in a waiting area.

The TRENDnet TPE-119GI device is shown with labeled ports and indicators. LED indicators labeled PWR and PoE are on the left side, along with a Gigabit Data in port labeled DATA and a Gigabit PoE++ out port labeled PoE/DATA. On the right side, there is a power port labeled AC INPUT 100-240VAC 50/60Hz 1.5A MAX.

4-Pair PoE

PoE++ injector supplies power to a PoE (up to 15.4W), PoE+ (up to 30W), or PoE++ (up to 95W) device

Easy Installation

No configuration needed, simply connect a PoE network device to the Power over Ethernet injector

Gigabit Ports

1 x Gigabit port and 1 x Gigabit PoE++ port

PoE Distance

Provides a 4-Pair PoE network connection up to 100m (328 ft.) away from the 802.3bt PoE injector

LED Indicators

LED indicators on the PoE injector confirm PoE connectivity

Wall Mount Design

Wall-mount design and a sturdy metal enclosure accommodates most installations scenarios

Auto-Sensing Technology

Auto-sensing technology on the 802.3bt PoE injector conveniently delivers the correct wattage needed to power your PoE, PoE+, and PoE++ devices

Standards	IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt
Device Interface	1 x Gigabit Data in port 1 x Gigabit PoE++ out port
Data Transfer Rate	Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex)
Special Features	Wall-mountable
PoE	Pin 1, 2, 7, 8 for power+ and pin 3, 6, 4, 5 for power-
Power	Input: 100 – 240V AC, 50/60Hz, internal power supply Max. Consumption: 3W
PoE Budget	Max. 95W
Temperature	0 – 40°C (32 – 104°F)
Humidity	Max. 90% non-condensing
Certifications	CE FCC ETL
Dimensions	154 x 73 x 36mm (6 x 2.9 x 1.4 in.)
Weight	422g (0.93 lb.)
Warranty	3 year

PACKAGE CONTENTS

TPE-119GI
Quick Installation Guide
Power cord

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.