6-Port Industrial Gigabit PoE+ DIN-Rail Switch 12 – 56 V

TI-PG62B (Version v1.0R)

  • 4 x Gigabit PoE+ ports
  • 2 x Dedicated SFP slots
  • 60 – 120 W power budget
  • 12 Gbps switching capacity
  • Hardened IP30 rated metal switch
  • Includes DIN-rail and wall mounts
  • Extreme -40 – 75 °C (-40 – 167 °F) operating temperature range
  • Redundant 12-56 VDC power inputs with overload current protection
  • Alarm output triggered by power failure
  • Power supply sold separately (model: TI-S12048)
  • NDAA / TAA compliant
  • Lifetime Warranty*
NDAA/TAA Compliant

TRENDnet's TI-PG62B is a reliable IP30 unmanaged hardened DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit PoE+ ports, two dedicated SFP slots and a 12 Gbps switching capacity. Redundant 12 – 56 VDC power inputs and a power failure alarm relay.

PoE Power

A 60 – 120 W PoE+ power budget supplies up to four Power over Ethernet devices.

Fault Tolerance

Features redundant 12 – 56 VDC power inputs with output alarm relay.

Industrial Hardened Design

Equipped with a rugged IP30 rated housing designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F).

Network Ports

4 x Gigabit PoE+ ports and 2 x dedicated SFP slots

DIN-Rail / Wall Mounts

IP30 rated metal enclosure with included DIN-rail and wall mount hardware

Switching Capacity

12 Gbps switching capacity

Redundant Power

Redundant power inputs with overload current protection (power supply sold separately models: (model: TI-S12048)

Alarm Relay

Alarm relay triggered by power failure of primary and/or redundant power

Jumbo Frame

Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance

Extreme Temperatures

Industrial switch is rated for an operating temperature range of -40 – 75 °C (-40 – 167 °F)

Shock and Vibration Resistant

Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)

Grounding Point

Grounding point protects equipment from external electrical surges

Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3ab
  • IEEE 802.3z
  • IEEE 802.3x
  • IEEE 802.3af
  • IEEE 802.3at
Device Interface
  • 4 x Gigabit PoE+ ports
  • 2 x 100/1000 Mbps SFP slots
  • 6-pin removable terminal block
  • LED indicators
  • DIP switch
  • DIN-Rail mount
  • Wall mount
  • Grounding point
Data Transfer Rate
  • Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
  • Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
  • Gigabit: 2000 Mbps (full duplex)
Performance
  • Data RAM Buffer: 1024 KB
  • Switching Fabric: 12 Gbps
  • MAC Address Table: 1 K entries
  • Jumbo Frame: 9 KB
  • Forwarding rate: 8.9 Mpps (64-byte packet size)
Special Features
  • Hardened components rated for extreme temperatures
  • Supports 12/24/48 power inputs
  • Voltage booster boost up to 55V DC
  • Redundant power inputs
  • Auto-Negotiation
  • Auto store and forward architecture
  • Automatic address learning and address aging
DC Power
  • Input: 12/24/48 V DC
  • Output: up to 55 V DC
  • Compatible power supply: TI-S12048 (sold separately)
  • Consumption: Max. 5.76 Watts (no PoE)
PoE
  • PoE budget: 120 W @ 24 VDC / 48 VDC / 56 VDC
  • PoE budget: 60 W @ 12 VDC
Terminal Block
  • Redundant power inputs, alarm relay contact, 6 pin
  • Wire range: 0.34 mm^2 to 2.5 mm^2
  • Solid wire (AWG): 12-24/14-22
  • Stranded wire (AWG): 12-24/14-22
  • Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
  • Wire strip length: 7-8 mm
DIP Switch
  • 1: OFF (port 5 SFP on, default), ON (port 5 SFP off)
  • 2: OFF (SFP 1000 M, default), ON (SFP 100 M)
Alarm Relay Contact
  • Relay outputs with current carrying capacity of 1A, 24V DC
  • Open circuit mode when one power source is connected
  • Short circuit mode when two power sources are connected
MTBF
  • 510,304 hours
Housing
  • IP30 metal case
  • DIN-rail mount
  • Wall mount
  • Grounding point
  • ESD Protection: Contact: 6kV / Air: 8kV
  • Surge Protection: 2kV
Operating Temperature
  • - 40 to 75 °C (-40 to 167 °F)
Operating Humidity
  • Max. 95 % non-condensing
Dimensions
  • 143 x 105 x 45 mm (5.6 x 4.1 x 1.8 in.)
Weight
  • 700 g (1.6 lb)
Certifications
  • CE
  • FCC
  • Shock (EN 60068-2-27)
  • Freefall (EN 60068-2-32)
  • Vibration (EN 60068-2-6)
Warranty

PACKAGE CONTENTS
  • TI-PG62B
  • Quick Installation Guide
  • Removable terminal block
  • DIN-rail and wall mount kit

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.