Industrial Gigabit PoE+ Extender

TI-E100 (Version v1.0R)

Easy installation
Extends 100m for a total distance of up to 200m (656 ft.)
Daisy chain up to 2 units for a total PoE network extension of up to 300m (984 ft.)*
Supports PoE (15.4W) and PoE+ (30W)
Wide operating temperature range of -40°– 75° C (-40° – 167° F)
Durable IP30 rated metal housing
Convenient wall mountable design
No external power adapter required
NDAA / TAA compliant (U.S. and Canada only)

TRENDnet's Industrial Gigabit PoE+ Extender, model TI-E100, takes a single PoE+ connection and extends it an additional 100m (328 ft.) for remote PoE/PoE+ device installation. The industrial PoE+ extender auto-detects a PoE or PoE+ connection, and then extends it for a total distance of up to 200m (656 ft.) from the PoE+ power source equipment. The TI-E100 industrial PoE+ extender features a convenient wall mountable design for installation flexibility. Daisy-chain up to two industrial PoE+ extenders for a total PoE+ network extension of 300m (984 ft.).

A network diagram showing a PoE/PoE+ switch connected to industrial Gigabit PoE+ extenders via Ethernet cable.

PoE Powered

Extends a single PoE/PoE+ network connection up to an additional 100m (328 ft.) for a remote PoE or PoE+ device installation.

Network diagram showing two Industrial Gigabit PoE+ Extenders connected to each other. A Bullet camera labeled PoE+ IP Camera is connected to one of the extenders.

Daisy-Chainable

Daisy-chain up to two industrial PoE+ extenders for a total PoE+ network extension of 300m (984 ft.).

Graphic with four icons: vibration, temperature, shock, and IP30 rating.

Industrial Grade Design

Built for harsh environments, with an IP30 enclosure rating, and a wide operating temperature range of -40°– 75° C (-40° – 167° F).

The illustration depicts a warehouse with a highlighted camera on the left, connected by a line labeled PoE/PoE+ 100m/328ft (PoE 5.93W, PoE+: 11.14W). In the middle, the TI-E100 is shown in an enclosure, with a connection line labeled PoE/PoE+ 100m/328ft (PoE: 8.89W, PoE+: 20.44W) leading to another TI-E100 in an enclosure. This setup extends to the server room, connected by a line labeled PoE/PoE+ 100m/328ft.

The illustration shows a front-angled view of the TI-E100, labeled with LED indicators, one Gigabit PoE+ in port, and one Gigabit PoE+ out port. On the left, a back-angled view is labeled with grounding point, wall mount, and DIN-Rail mount.

Extension Distance

Extends a PoE/PoE+ network connection an additional 100m for a total distance of up to 200m (656 ft.) from the PoE power source equipment

PoE/PoE+

Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE (15.4W) or PoE+ (30W) device

Gigabit Ports

The industrial PoE+ extender features one gigabit PoE+ input port and one gigabit PoE+ output port

PoE Powered

No external power required—saves on cost installation time

Daisy-Chain

Connect up to two TI-E100 industrial PoE+ extenders for a total PoE+ network extension of up to 300m (984 ft.)

Industrial Grade Design

Built for harsh environments, with an IP30 enclosure rating, and a wide operating temperature range of -40°– 75° C (-40° – 167° F)

LED Indicators

LED indicators to convey status

Standards	IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at
Device Interface	1 x Gigabit PoE+ in port 1 x Gigabit PoE+ out port LED indicators DIN-Rail mount Wall mount Grounding point
Data Transfer Rate	Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex)
Performance	Data RAM Buffer: 128KB MAC Address Table: 2K Jumbo Frame: 9KB
Special Features	Extends a PoE/PoE+ network connection an additional 100 meters Cascade up to 2 units for a total distance of up to 300m (984 ft.) @50V power input Cascade up to 3 units for a total distance of up to 400m (1312 ft.) @56V power input ESD Contact 6kV/Air 8kV and Surge 2kV protection
PoE	Power input: 15.4W/30W/60W Power output: 15.4W/30W Max. consumption: 3.5W (no PoE)
Housing	IP30 metal case DIN-Rail mount Wall mount Grounding point Contact 6kV, Air 8kV ESD protection 2kV surge protection
Operating Temperature	- 40° — 75° C (-40° — 167° F)
Operating Humidity	Max. 90% non-condensing
Dimensions	103 x 80 x 32mm (4 x 3.1 x 1.25 in.)
Weight	158g (5.6 oz.)
Certifications	CE FCC IEC EN60950-1 Shock (IEC 60068-2-27) Freefall (IEC 60068-2-32) Vibration (IEC 60068-2-6)
Warranty	3-year

PACKAGE CONTENTS

TI-E100
Quick Installation Guide
DIN-Rail and wall mount kit

*Each additional extender added to the daisy chain will decrease the overall available PoE budget.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.